MPSA92RLRP Equivalent & Substitute Parts

Part Overview

The MPSA92RLRP is a PNP bipolar junction transistor manufactured by onsemi, rated for 300 V collector-emitter breakdown voltage and 500 mA maximum collector current. This device is packaged in a Through Hole TO-92 configuration and is suitable for general-purpose switching and amplification applications. The MPSA92RLRP is classified as obsolete, making identification of equivalent substitute parts necessary for ongoing design support and procurement continuity.

Substiute Parts

MPSA92RLRP

onsemiIn Stock: 1096MPSA92RLRP Datasheet

Current PartRFQ

KSP92TA

onsemiIn Stock: 85129KSP92TA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPSA92RLRP is determined by electrical and mechanical parameter equivalence. The following criteria establish substitution validity:

Electrical Parameters (Must Match):

• Transistor Type: PNP
• Current - Collector (Ic) (Max): 500 mA
• Voltage - Collector Emitter Breakdown (Max): 300 V
• Vce Saturation (Max) @ Ib, Ic: 500mV @ 2mA, 20mA
• Current - Collector Cutoff (Max): 250nA (ICBO)
• DC Current Gain (hFE) (Min) @ Ic, Vce: 25 @ 30mA, 10V
• Power - Max: 625 mW
• Frequency - Transition: 50MHz

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: TO-92-3

The KSP92TA meets all electrical and mechanical parameter requirements for direct substitution with the MPSA92RLRP.

Parameter Comparison

Engineering Selection Recommendations

The KSP92TA is a direct electrical and mechanical equivalent to the MPSA92RLRP. All critical electrical parameters including collector current, breakdown voltage, saturation voltage, cutoff current, DC current gain, power dissipation, and transition frequency are identical. Both devices utilize the Through Hole TO-92-3 package configuration, ensuring mechanical compatibility in existing PCB layouts.

The KSP92TA holds Active product status, whereas the MPSA92RLRP is classified as Obsolete. The KSP92TA is ROHS3 compliant, providing regulatory advantage over the non-compliant MPSA92RLRP. Both devices maintain REACH Unaffected status and share the same ECCN and HTSUS classifications.

Selection of the KSP92TA for new designs or replacement applications is supported by parameter equivalence and active product availability.

Frequently Asked Questions (FAQ)

Q: Can the KSP92TA directly replace the MPSA92RLRP in existing circuits?

A: Yes. The KSP92TA meets all electrical and mechanical parameter requirements for direct substitution. Collector current, breakdown voltage, saturation characteristics, current gain, power rating, and transition frequency are identical. Both devices use the Through Hole TO-92-3 package.

Q: What is the primary reason to substitute the MPSA92RLRP?

A: The MPSA92RLRP is classified as Obsolete. The KSP92TA is an Active product with equivalent specifications, ensuring long-term availability and supply chain continuity.

Q: Are there packaging differences between these devices?

A: Both the MPSA92RLRP and KSP92TA use the TO-92-3 package configuration. The MPSA92RLRP is supplied with formed leads in long body configuration, while the KSP92TA is supplied in Cut Tape packaging. The physical package dimensions and pin configuration remain compatible for Through Hole PCB mounting.

Q: Does the KSP92TA meet current regulatory requirements?

A: Yes. The KSP92TA is ROHS3 compliant, whereas the MPSA92RLRP is RoHS non-compliant. Both devices are REACH Unaffected and share identical ECCN and HTSUS classifications.

Q: Are the electrical characteristics identical between these parts?

A: Yes. Maximum collector current, collector-emitter breakdown voltage, saturation voltage, cutoff current, DC current gain, maximum power dissipation, and transition frequency are identical across all specified operating conditions.