MPQ2013GG-Z Linear Voltage Regulator Equivalent & Substitute Parts

Part Overview

The MPQ2013GG-Z is an active linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable regulator delivers 150mA output current in an 8-QFN (3x3) surface mount package. The device is currently in active product status and is ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when specific packaging or qualification requirements differ, or when supply chain optimization requires component alternatives that maintain electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Output Configuration	Positive
Output Type	Adjustable
Number of Regulators	1
Voltage - Input (Max)	40V
Voltage - Output (Min/Fixed)	1.215V
Voltage - Output (Max)	15V
Current - Output	150mA
Operating Temperature	-40°C ~ 125°C (TJ)
Package / Case	8-VDFN Exposed Pad
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution eligibility for the MPQ2013GG-Z is determined by the following critical parameters:

Output Configuration & Type: All substitutes must maintain positive adjustable output
Current Rating: All substitutes must deliver 150mA output current
Voltage Range: Input maximum 40V, output adjustable 1.215V to 15V
Package: All substitutes use 8-VDFN Exposed Pad in 8-QFN (3x3) form factor
Mounting Type: Surface mount compatibility required
Compliance: ROHS3 compliance and MSL 1 rating maintained across all substitutes

The substitute parts are grouped into two categories based on dropout voltage specifications and packaging format:

Category A (Standard Dropout): MP2013AGQ-P, MP2013AGQ-Z, MPQ2013GQ-P, MPQ2013GQ-Z — dropout voltage 0.85V to 0.9V @ 150mA

Category B (Automotive Grade): MPQ2013AGQ-AEC1-Z, MPQ2013AGQ-P, MPQ2013AGQ-Z — dropout voltage 1.1V @ 150mA with AEC-Q100 qualification

Parameter Comparison

Part Number	Manufacturer	Packaging	Voltage Dropout (Max) @ 150mA	Current - Supply (Max)	Inventory (Pcs)	Grade / Qualification
MPQ2013GG-Z	Monolithic Power Systems Inc.	Cut Tape (CT) & Digi-Reel®	0.9V	50 µA	5400	Standard
MP2013AGQ-P	Monolithic Power Systems Inc.	Tape & Reel (TR)	0.85V	22 µA	1638	Standard
MP2013AGQ-Z	Monolithic Power Systems	Cut Tape (CT) & Digi-Reel®	0.85V	22 µA	50400	Standard
MPQ2013AGQ-AEC1-Z	Monolithic Power Systems Inc.	Cut Tape (CT) & Digi-Reel®	1.1V	50 µA	41676	Automotive / AEC-Q100
MPQ2013AGQ-P	Monolithic Power Systems Inc.	Tape & Reel (TR)	1.1V	50 µA	19902	Standard
MPQ2013AGQ-Z	Monolithic Power Systems Inc.	Cut Tape (CT) & Digi-Reel®	1.1V	50 µA	3541	Standard
MPQ2013GQ-P	Monolithic Power Systems	Tape & Reel (TR)	0.9V	50 µA	2998	Standard
MPQ2013GQ-Z	Monolithic Power Systems	Tape & Reel (TR)	0.9V	50 µA	63700	Standard

Engineering Selection Recommendations

For Standard Industrial Applications: MP2013AGQ-Z and MPQ2013GQ-Z are preferred substitutes. Both maintain the 0.85V to 0.9V dropout voltage specification and offer superior supply current efficiency (22 µA vs. 50 µA). MP2013AGQ-Z provides the highest inventory availability (50,400 units) with Cut Tape & Digi-Reel® packaging.

For Automotive Applications: MPQ2013AGQ-AEC1-Z is the designated substitute when AEC-Q100 qualification is required. This part maintains the same electrical performance as the main part (0.9V dropout equivalent at 1.1V specification) and carries automotive-grade certification.

For Tape & Reel Packaging Requirements: MPQ2013GQ-Z offers the highest inventory (63,700 units) with standard dropout voltage matching the main part. MPQ2013AGQ-P provides an alternative with improved supply current efficiency (22 µA).

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical functional specifications for output configuration, voltage range, and current delivery.

Frequently Asked Questions (FAQ)

Q: Can MP2013AGQ-Z be used as a direct replacement for MPQ2013GG-Z?

A: Yes. Both parts share identical electrical specifications: 40V maximum input, 1.215V to 15V adjustable output, 150mA output current, and 8-VDFN package. The primary difference is packaging format (Cut Tape & Digi-Reel® vs. standard cut tape) and improved supply current efficiency in MP2013AGQ-Z (22 µA vs. 50 µA).

Q: What is the difference between the MPQ2013AGQ-AEC1-Z and other substitutes?

A: MPQ2013AGQ-AEC1-Z carries AEC-Q100 automotive qualification and is specified for automotive-grade applications. The dropout voltage specification is 1.1V @ 150mA compared to 0.9V in standard variants. This part is required for automotive designs requiring formal qualification compliance.

Q: Are packaging differences (Tape & Reel vs. Cut Tape) electrically significant?

A: No. Packaging format differences (TR vs. CT & Digi-Reel®) affect only supply chain handling and assembly processes. Electrical performance and functional specifications remain identical across all packaging variants.

Q: Which substitute offers the best supply current efficiency?

A: MP2013AGQ-P and MP2013AGQ-Z both specify 22 µA maximum supply current, compared to 50 µA in the main part and other substitutes. This represents a 56% reduction in quiescent current draw.

Q: Can substitutes be mixed in the same design revision?

A: All listed substitutes maintain identical electrical specifications for output configuration, voltage range, current delivery, and thermal performance. However, if automotive qualification (AEC-Q100) is required, only MPQ2013AGQ-AEC1-Z is appropriate. For non-automotive applications, any substitute with matching dropout voltage specification can be used.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message