MPQ2013AGG-33-Z Linear Voltage Regulator IC

Part Overview

The MPQ2013AGG-33-Z is a linear voltage regulator IC manufactured by Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This device provides a fixed 3.3V positive output with 150mA current capacity in a 6-QFN (2x2) surface mount package. The part is currently active in production with 3,719 units in stock. Alternative part numbers within the MPQ2013 series are available to support supply chain flexibility and regional distribution requirements.

Substiute Parts

MPQ2013AGG-33-Z

Monolithic Power Systems Inc.In Stock: 3766MPQ2013AGG-33-Z Datasheet

Current PartRFQ

MPQ2013AGG-33-AEC1-P

Monolithic Power Systems Inc.In Stock: 1716MPQ2013AGG-33-AEC1-P Datasheet

Parametric EquivalentRFQ

MPQ2013AGG-33-AEC1-Z

Monolithic Power Systems Inc.In Stock: 30695MPQ2013AGG-33-AEC1-Z Datasheet

Parametric EquivalentRFQ

MPQ2013AGG-33-P

Monolithic Power Systems Inc.In Stock: 1236MPQ2013AGG-33-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MPQ2013AGG-33 series consists of parametrically equivalent parts that share identical electrical and mechanical specifications. Substitution within this series is based on the following criteria:

Electrical Parameters (Identical Across All Variants):

• Output voltage: 3.3V fixed
• Output current: 150mA
• Input voltage range: up to 40V
• Dropout voltage: 1.1V @ 150mA
• Quiescent current: 50 µA
• PSRR: 58dB ~ 41dB (100Hz ~ 1kHz)
• Operating temperature: -40°C ~ 125°C (TJ)

Mechanical Parameters (Identical Across All Variants):

• Package: 6-VDFN Exposed Pad
• Mounting: Surface Mount
• Supplier device package: 6-QFN (2x2)

Differentiating Factors:

• Packaging format suffix: -Z (Tape & Reel standard), -P (Tape & Reel alternative), -AEC1 (automotive-grade qualification)
• Inventory availability varies by part number variant

All variants maintain identical functional performance and are interchangeable at the circuit level when packaging format and qualification requirements are met.

Parameter Comparison

Engineering Selection Recommendations

All four part numbers within the MPQ2013AGG-33 series are active products with identical electrical and mechanical specifications. Selection between variants should be based on the following criteria:

Packaging Format: The -Z and -P suffixes denote different Tape & Reel packaging formats. Both are standard production variants with no functional difference. Selection depends on your assembly equipment compatibility and supply chain requirements.

Automotive Qualification: The -AEC1 designation indicates automotive-grade qualification. Parts with this suffix (MPQ2013AGG-33-AEC1-P and MPQ2013AGG-33-AEC1-Z) meet additional automotive reliability and testing standards. Use these variants for automotive applications or when automotive-grade certification is contractually required.

Compliance Status: All variants are ROHS3 compliant, REACH unaffected, and carry MSL rating 1 (unlimited moisture sensitivity level), making them suitable for standard industrial and commercial applications.

Inventory Availability: MPQ2013AGG-33-AEC1-Z offers the highest stock level (30,646 units), providing supply chain security for high-volume production. Other variants have lower inventory levels and should be evaluated based on lead time requirements.

Frequently Asked Questions (FAQ)

Q: Can I substitute MPQ2013AGG-33-Z with MPQ2013AGG-33-P in my design?

A: Yes. Both parts are parametrically identical with the same electrical performance and package specifications. The difference is the Tape & Reel packaging format. Substitution is valid if your assembly equipment supports the -P format.

Q: What is the difference between standard and AEC1 variants?

A: The -AEC1 designation indicates automotive-grade qualification with additional reliability testing and documentation. Functionally, the parts are identical. Use -AEC1 variants only if your application requires automotive certification or if specified in your procurement requirements.

Q: Are all variants ROHS3 compliant?

A: Yes. All four part numbers (MPQ2013AGG-33-Z, -P, -AEC1-P, and -AEC1-Z) are ROHS3 compliant with MSL rating 1 (unlimited), meeting standard environmental and reliability requirements.

Q: Which variant should I choose for high-volume production?

A: MPQ2013AGG-33-AEC1-Z is recommended for high-volume production due to its significantly higher inventory level (30,646 units). This ensures supply continuity and reduces lead time risk.

Q: Can I mix different variants in the same production batch?

A: Yes. All variants are electrically and mechanically interchangeable. However, verify that your assembly process and documentation procedures accommodate multiple part number variants if required by your quality system.

Q: What is the MSL rating and why does it matter?

A: MSL (Moisture Sensitivity Level) 1 means unlimited shelf life without moisture control requirements. All variants carry this rating, eliminating the need for dry storage or baking procedures before assembly.