MPM5001AT1 Equivalent & Substitute Parts

Part Overview

The MPM5001AT1 is a 2-resistor network voltage divider manufactured by Vishay Dale Thin Film. This surface-mount component features dual 2.5kΩ resistors with ±0.1% tolerance and ±25ppm/°C temperature coefficient, designed for precision voltage divider applications requiring matched resistor pairs. The part is currently active in production and available in SOT-23 packaging. Substitute parts are identified to support procurement flexibility, inventory management, and compliance requirements across different manufacturing batches and availability windows.

Substiute Parts

MPM5001AT1

Vishay Dale Thin FilmIn Stock: 1135MPM5001AT1 Datasheet

Current PartRFQ

MPMT5001AT1

Vishay Dale Thin FilmIn Stock: 5557MPMT5001AT1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPM5001AT1 is determined by strict equivalence across the following critical parameters:

• Resistance values: 2.5kΩ and 2.5kΩ
• Tolerance specification: ±0.1%
• Resistor matching ratio: ±0.05%
• Temperature coefficient: ±25ppm/°C
• Power rating per element: 100mW
• Circuit configuration: 2-resistor voltage divider network
• Pin count and configuration: 3-pin SOT-23
• Operating temperature range: -55°C to 125°C
• Mounting technology: Surface mount

The MPMT5001AT1 meets all electrical and mechanical specifications required for direct substitution with the MPM5001AT1. Both parts are manufactured by Vishay Dale Thin Film within the same product series and share identical functional parameters, package geometry, and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

The MPMT5001AT1 is a direct functional equivalent to the MPM5001AT1 across all electrical and mechanical parameters. Selection between these parts should be based on compliance requirements and product status considerations:

The MPM5001AT1 is RoHS non-compliant, while the MPMT5001AT1 is RoHS3 compliant. Applications subject to RoHS directives or customer specifications requiring RoHS compliance must use the MPMT5001AT1. Both parts maintain identical electrical performance, thermal characteristics, and package compatibility, ensuring seamless integration into existing circuit designs without modification to PCB layouts or assembly processes.

Both parts are active products with current manufacturing status and full availability through authorized distributors.

Frequently Asked Questions (FAQ)

Q: Can MPMT5001AT1 replace MPM5001AT1 in existing designs?

A: Yes. The MPMT5001AT1 is electrically and mechanically equivalent to the MPM5001AT1. All resistance values, tolerances, temperature coefficients, power ratings, pin configurations, and package dimensions are identical. Direct substitution is possible without circuit redesign or PCB modification.

Q: What is the primary difference between these two parts?

A: The primary difference is RoHS compliance status. The MPM5001AT1 is RoHS non-compliant, while the MPMT5001AT1 is RoHS3 compliant. All other specifications are identical.

Q: Are both parts available in the same packaging?

A: Yes. Both the MPM5001AT1 and MPMT5001AT1 are supplied in SOT-23 surface-mount packaging (TO-236-3, SC-59, SOT-23-3) with identical physical dimensions: 0.113" L × 0.051" W (2.86mm × 1.30mm) and maximum seated height of 0.044" (1.12mm).

Q: Which part should be selected for new designs?

A: For new designs subject to RoHS regulations or customer RoHS requirements, select the MPMT5001AT1. For applications without RoHS compliance mandates, either part is acceptable based on availability and procurement considerations.

Q: Do these parts have identical thermal performance?

A: Yes. Both parts share identical temperature coefficients of ±25ppm/°C and operate across the same temperature range of -55°C to 125°C, ensuring equivalent thermal stability and performance in all operating conditions.

Q: Are there any differences in moisture sensitivity?

A: No. Both parts have identical Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity concerns for either component.