MPM2002AT1 Equivalent & Substitute Parts

Part Overview

The MPM2002AT1 is a 2-resistor network array manufactured by Vishay Dale Thin Film, configured as a voltage divider with matched 10kΩ resistors. This surface-mount component operates across -55°C to 125°C and is designed for precision applications requiring tight resistor matching and low temperature coefficient drift. The part is currently active in production. Substitute parts may be required due to inventory availability, compliance requirements, or specific application certifications.

Substiute Parts

MPM2002AT1

Vishay Dale Thin FilmIn Stock: 1764MPM2002AT1 Datasheet

Current PartRFQ

MPMT2002AT1

Vishay Dale Thin FilmIn Stock: 1348MPMT2002AT1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPM2002AT1 is determined by strict equivalence across the following critical parameters:

• Resistance values: Both resistors must be 10kΩ
• Tolerance: ±0.1% maximum
• Resistor matching ratio: ±0.05% maximum
• Temperature coefficient: ±25ppm/°C maximum
• Power rating: 100mW per element minimum
• Circuit configuration: Voltage divider topology with 2 resistors
• Package: TO-236-3 / SOT-23-3 surface mount
• Pin count: 3 pins
• Operating temperature range: -55°C to 125°C minimum

The substitute part MPMT2002AT1 meets all electrical and mechanical parameters specified for the MPM2002AT1, maintaining identical functional performance and physical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The MPMT2002AT1 is a direct electrical and mechanical equivalent to the MPM2002AT1. Both parts are manufactured by Vishay Dale Thin Film and share identical specifications for resistance values, tolerance, matching ratio, temperature coefficient, power rating, and package dimensions.

The primary distinction between these parts is RoHS compliance status. The MPM2002AT1 is RoHS non-compliant, while the MPMT2002AT1 is ROHS3 compliant. Selection between these parts should be based on regulatory requirements applicable to the end application. Both parts maintain identical electrical performance and physical compatibility for voltage divider circuit applications.

Frequently Asked Questions (FAQ)

Q: Can MPMT2002AT1 be used as a direct replacement for MPM2002AT1?

A: Yes. The MPMT2002AT1 is electrically and mechanically equivalent to the MPM2002AT1. All critical parameters including resistance values, tolerance, matching ratio, temperature coefficient, power rating, and package dimensions are identical. Both parts are suitable for the same voltage divider applications.

Q: What is the difference between MPM2002AT1 and MPMT2002AT1?

A: The primary difference is RoHS compliance. The MPM2002AT1 is RoHS non-compliant, while the MPMT2002AT1 is ROHS3 compliant. All electrical and mechanical specifications are identical.

Q: Are these parts pin-compatible?

A: Yes. Both the MPM2002AT1 and MPMT2002AT1 use the same 3-pin TO-236-3 / SOT-23-3 package with identical pin configuration and physical dimensions (0.113" L x 0.051" W, 2.86mm x 1.30mm).

Q: What applications are these resistor networks suitable for?

A: These parts are designed for voltage divider applications requiring precision matching and low temperature coefficient drift. The ±0.05% matching ratio and ±2ppm/°C ratio drift make them suitable for precision analog circuits, sensor signal conditioning, and reference voltage applications.

Q: What is the operating temperature range for these parts?

A: Both parts operate across -55°C to 125°C with a temperature coefficient of ±25ppm/°C.

Q: Are these parts available in other package types?

A: The specifications provided indicate these parts are available only in the TO-236-3 / SOT-23-3 surface-mount package.