MPC9230AC Equivalent & Substitute Parts

Part Overview

The MPC9230AC is a Clock/Frequency Synthesizer and Clock Generator Multiplexer IC manufactured by NXP USA Inc., designed for high-speed timing applications up to 750MHz. This device features a Phase-Locked Loop (PLL) with bypass capability, crystal input, and LVPECL output configuration in a 32-LQFP surface mount package.

The MPC9230AC is classified as obsolete. Identifying equivalent and substitute parts is necessary to support legacy system maintenance, design updates, and procurement continuity when original inventory becomes unavailable.

Substiute Parts

MPC9230AC

NXP USA Inc.In Stock: 1814MPC9230AC Datasheet

Current PartRFQ

MPC9230AC

NXP USA Inc.In Stock: 1814MPC9230AC Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPC9230AC is determined by strict alignment of the following critical parameters:

• Maximum frequency capability: 750MHz
• PLL architecture with bypass functionality
• Crystal input interface
• LVPECL differential output configuration
• Single circuit topology with 1:1 input:output ratio
• Supply voltage range: 3.135V ~ 3.465V
• Operating temperature range: -40°C ~ 85°C
• 32-LQFP surface mount package (7x7mm)
• RoHS3 compliance and REACH unaffected status

Based on the provided input data, the MPC9230AC is listed as its own direct equivalent. No alternative part numbers are specified in the substitute parts list.

Parameter Comparison

Engineering Selection Recommendations

The MPC9230AC is classified as obsolete. For applications requiring this clock synthesizer, component selection should prioritize:

• Verification of RoHS3 compliance for regulatory adherence
• Confirmation of REACH unaffected status for supply chain compliance
• Validation of MSL 3 moisture sensitivity requirements for assembly and storage procedures
• Confirmation that the 32-LQFP (7x7mm) package footprint is compatible with existing PCB designs

When the MPC9230AC is unavailable, alternative clock/frequency synthesizer ICs must match all specified electrical parameters: 750MHz maximum frequency, PLL with bypass, crystal input, LVPECL output, 3.135V–3.465V supply voltage, and -40°C to 85°C operating temperature range. Package compatibility with 32-LQFP surface mount configuration is mandatory for direct board-level substitution.

Frequently Asked Questions (FAQ)

Q: What makes the MPC9230AC suitable for substitution purposes? A: The MPC9230AC meets ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility. Its MSL 3 rating supports standard assembly processes. These certifications establish a baseline for identifying equivalent parts.

Q: Can I use a different package type as a substitute? A: No. The 32-LQFP (7x7mm) surface mount package is a critical mechanical specification. Substitutes must use the identical package to ensure PCB footprint compatibility and assembly compatibility without design modifications.

Q: What are the critical electrical parameters for substitution? A: Maximum frequency (750MHz), PLL with bypass capability, crystal input interface, LVPECL differential output, 1:1 input:output ratio, supply voltage range (3.135V–3.465V), and operating temperature range (-40°C to 85°C) are non-negotiable substitution criteria.

Q: Why is the MPC9230AC listed as obsolete? A: Obsolete status indicates the part is no longer manufactured by NXP USA Inc. Legacy system support and component procurement require identification of functionally equivalent alternatives from active product lines.

Q: Does MSL 3 affect component handling? A: Yes. MSL 3 requires moisture bake-out procedures and controlled storage conditions (168-hour maximum floor life at specified humidity). Substitute parts must maintain equivalent or lower MSL ratings to preserve assembly reliability.