MPC8347CVRAGD Equivalent & Substitute Parts

Part Overview

The MPC8347CVRAGD is a PowerPC e300 microprocessor IC from the MPC83xx series, featuring a single 32-bit core operating at 400MHz. This embedded processor integrates dual 10/100/1000Mbps Ethernet ports, dual USB 2.0 interfaces with PHY, DDR RAM controller, and additional connectivity options including DUART, I2C, PCI, and SPI interfaces. The device is housed in a 620-HBGA (29x29) package with surface mount configuration.

The MPC8347CVRAGD carries an Obsolete product status. Locating equivalent or substitute components becomes necessary when original inventory is depleted or when system redesigns require active production alternatives with identical electrical and mechanical specifications.

Substiute Parts

MPC8347CVRAGD

NXP USA Inc.In Stock: 731MPC8347CVRAGD Datasheet

Current PartRFQ

MPC8347CVRAGDB

NXP USA Inc.In Stock: 1425MPC8347CVRAGDB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MPC8347CVRAGD is determined by strict equivalence across the following critical parameters:

• Core processor architecture (PowerPC e300)
• Core count and bus width (1 Core, 32-Bit)
• Operating frequency (400MHz)
• Integrated peripheral set (Ethernet, USB, DDR controller, DUART, I2C, PCI, SPI)
• Electrical specifications (Voltage - I/O: 2.5V, 3.3V)
• Operating temperature range (-40°C ~ 105°C)
• Physical package (620-HBGA 29x29, Surface Mount)
• Compliance certifications (ROHS3, REACH Unaffected, MSL 3)

The MPC8347CVRAGDB qualifies as a direct substitute based on identical electrical, functional, and mechanical parameters. The primary distinction is packaging format (Tray versus standard packaging) and product status transition from Obsolete to Active.

Parameter Comparison

Engineering Selection Recommendations

The MPC8347CVRAGDB is the direct substitute for MPC8347CVRAGD applications. Both devices maintain identical electrical specifications, functional integration, and physical packaging. The MPC8347CVRAGDB offers the advantage of Active product status, ensuring continued availability and manufacturing support from NXP USA Inc.

Selection between these parts should be based on supply chain requirements and inventory status. The MPC8347CVRAGDB is the preferred choice for new designs and ongoing production due to its Active designation. For legacy system maintenance where original part specifications must be preserved, the MPC8347CVRAGD remains functionally equivalent where available inventory permits.

Both parts satisfy ROHS3 compliance and REACH Unaffected requirements, maintaining regulatory alignment for industrial and embedded applications. Moisture sensitivity level 3 (168 hours) applies uniformly across both variants.

Frequently Asked Questions (FAQ)

Q: Are MPC8347CVRAGD and MPC8347CVRAGDB pin-compatible?

A: Yes. Both devices utilize identical 620-HBGA (29x29) package geometry with 620-BBGA Exposed Pad configuration. Pin assignments, signal definitions, and electrical characteristics are equivalent.

Q: What is the functional difference between these two part numbers?

A: No functional differences exist. Both integrate PowerPC e300 single-core 32-bit architecture at 400MHz with identical peripheral sets: dual Gigabit Ethernet, dual USB 2.0 with PHY, DDR controller, and DUART/I2C/PCI/SPI interfaces. The primary distinction is product lifecycle status.

Q: Why is MPC8347CVRAGD marked Obsolete?

A: Obsolete status indicates NXP USA Inc. has discontinued active production and support for this specific part number variant. The MPC8347CVRAGDB represents the active production equivalent.

Q: Can I use MPC8347CVRAGDB as a direct replacement in existing designs?

A: Yes. Electrical specifications, package dimensions, pin configuration, and functional integration are identical. No design modifications are required for substitution.

Q: Are there any compliance or certification differences?

A: No. Both parts maintain ROHS3 compliance, REACH Unaffected status, and identical Moisture Sensitivity Level 3 (168 hours) ratings.

Q: What packaging format differences exist?

A: MPC8347CVRAGD uses standard packaging, while MPC8347CVRAGDB is supplied in Tray format. This distinction affects handling and storage procedures but does not impact electrical or mechanical compatibility.