MPC8315ECVRAFDA Equivalent & Substitute Parts

Part Overview

The MPC8315ECVRAFDA is a PowerPC e300c3 microprocessor from the MPC83xx embedded processor family, operating at 333MHz with 32-bit architecture. This device integrates dual Gigabit Ethernet ports, dual SATA 3Gbps interfaces, USB 2.0 connectivity, and security co-processors including cryptography and random number generation capabilities. The part is classified as Obsolete, necessitating identification of equivalent substitute components for ongoing system support and new design implementations.

Substiute Parts

MPC8315ECVRAFDA

NXP USA Inc.In Stock: 1823MPC8315ECVRAFDA Datasheet

Current PartRFQ

MPC8315CVRAFDA

NXP USA Inc.In Stock: 1447MPC8315CVRAFDA Datasheet

DirectRFQ

MPC8314CVRAFDA

Freescale SemiconductorIn Stock: 785MPC8314CVRAFDA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MPC8315ECVRAFDA are qualified based on the following electrical and mechanical parameters:

Core Compatibility Parameters:

• PowerPC e300c3 core processor architecture
• 1 Core, 32-Bit configuration
• 333MHz operating frequency
• 620-BBGA Exposed Pad package with identical physical dimensions (29x29)
• Surface mount mounting type
• Operating temperature range -40°C ~ 105°C (TA)
• I/O voltage support: 1.8V, 2.5V, 3.3V

Interface Requirements:

• Dual Gigabit Ethernet (10/100/1000Mbps)
• USB 2.0 with PHY
• DUART, I2C, PCI, SPI, TDM interfaces
• Compliance certifications: ROHS3, MSL 3 (168 Hours)

The identified substitutes maintain these core parameters while variations in co-processor features, SATA interface availability, and packaging format are documented for engineering evaluation.

Parameter Comparison

Engineering Selection Recommendations

MPC8315CVRAFDA is the primary direct substitute for the MPC8315ECVRAFDA. Both devices share identical electrical specifications, core architecture, and interface configurations. The MPC8315CVRAFDA maintains Active product status with ROHS3 compliance and MSL 3 rating, providing continuity for applications requiring the full feature set including dual SATA 3Gbps interfaces. Packaging format differs (Tray vs. standard), which may affect procurement and handling procedures.

MPC8314CVRAFDA serves as an alternative substitute from Freescale Semiconductor. This device maintains core processor architecture, clock frequency, and primary interface requirements. The MPC8314CVRAFDA includes HSSI interface capability not present in the primary part. SATA interface specification is not provided for this variant, requiring design verification if dual SATA 3Gbps connectivity is mandatory. RoHS and MSL certifications are not specified for this part.

Selection between MPC8315CVRAFDA and MPC8314CVRAFDA depends on SATA interface requirements and certification compliance needs for the target application.

Frequently Asked Questions (FAQ)

Q: Can MPC8315CVRAFDA directly replace MPC8315ECVRAFDA in existing designs?

A: Yes. Both parts share identical core processor, clock speed, package dimensions (620-BBGA 29x29), and primary interface specifications. The primary difference is product status (Active vs. Obsolete) and packaging format (Tray vs. standard). No design modifications are required for electrical or mechanical compatibility.

Q: What is the key difference between MPC8315CVRAFDA and MPC8314CVRAFDA?

A: The MPC8315CVRAFDA includes dual SATA 3Gbps interfaces and maintains full ROHS3/MSL 3 compliance documentation. The MPC8314CVRAFDA does not specify SATA interface availability and lacks published RoHS/MSL certifications. Both maintain identical PowerPC e300c3 core, 333MHz speed, and dual Gigabit Ethernet connectivity.

Q: Are all three parts pin-compatible?

A: All three parts use the 620-BBGA Exposed Pad package with identical physical dimensions (29x29). Pin compatibility requires verification against specific pinout documentation for each variant, as interface feature differences may result in functional pin assignment variations.

Q: What compliance certifications apply to each substitute?

A: MPC8315ECVRAFDA and MPC8315CVRAFDA both carry ROHS3 Compliant status and MSL 3 (168 Hours) rating. MPC8314CVRAFDA compliance certifications are not specified in available documentation.

Q: Does packaging format affect circuit board assembly?

A: MPC8315ECVRAFDA uses standard packaging, while MPC8315CVRAFDA uses Tray packaging. MPC8314CVRAFDA uses Bulk packaging. Packaging format affects component handling, storage, and procurement logistics but does not impact electrical performance or board-level integration.