MPC6-1YD110V Equivalent & Substitute Parts

Part Overview

The MPC6-1YD110V is a panel-mounted indicator light manufactured by Bivar Inc., featuring a yellow diffused lens with a 45° viewing angle and 110V operation. This component is classified as obsolete, necessitating identification of active equivalent parts for new designs and ongoing production requirements. The indicator utilizes a solder lug termination style and delivers 40mcd light output at a 590nm wavelength peak.

Substiute Parts

MPC6-1YD110V

Bivar Inc.In Stock: 1092MPC6-1YD110V Datasheet

Current PartRFQ

MPC8-1YD110V

Bivar Inc.In Stock: 1230MPC8-1YD110V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The MPC8-1YD110V qualifies as a functional equivalent based on the following critical parameters that determine substitution validity:

Matching Parameters:

• Manufacturer: Bivar Inc. (same manufacturer ensures design compatibility)
• Lamp Color: Yellow (identical light output color)
• Lens Transparency: Diffused (same optical diffusion characteristics)
• Voltage Rating: 110V (identical electrical specification)
• Panel Cutout Shape: Round (same mechanical mounting interface)
• Lens Style: Round with Domed Top (identical optical form factor)
• Wavelength - Peak: 590nm (identical spectral output)
• Viewing Angle: 45° (identical viewing characteristics)
• Ingress Protection: IP54 (equivalent environmental sealing)
• Moisture Sensitivity Level: 1 (Unlimited) (identical handling requirements)

Differing Parameters:

• Panel Cutout Dimensions: 0.31" (7.87mm) versus 0.23" (5.84mm) — requires panel modification
• Termination Style: Quick Connect - 0.110" (2.8mm) versus Solder Lug — requires connection method change
• Millicandela Rating: 20mcd versus 40mcd — reduced light output intensity
• Product Status: Active versus Obsolete — ensures ongoing availability
• Series: MPC8-1 versus MPC6-1 — different product line within same manufacturer

Parameter Comparison

Engineering Selection Recommendations

The MPC8-1YD110V is an active product from Bivar Inc. and serves as the designated successor to the obsolete MPC6-1YD110V. Selection of the MPC8-1YD110V requires accommodation of three design modifications:

Panel Cutout Modification: The substitute part requires a 0.31" (7.87mm) diameter cutout compared to the original 0.23" (5.84mm). Panel drilling or modification is necessary for mechanical fit.

Termination Method Change: The substitute employs Quick Connect - 0.110" (2.8mm) termination in place of solder lug connection. Circuit board or wiring harness redesign is required to accommodate the new connection interface.

Light Output Reduction: The MPC8-1YD110V delivers 20mcd versus the original 40mcd output. Applications requiring the original brightness level must evaluate whether reduced intensity meets functional requirements or if alternative higher-output models are necessary.

Compliance Status: The MPC8-1YD110V carries RoHS3 compliance certification, ensuring alignment with current environmental and regulatory standards. Both parts share identical ECCN (EAR99) and HTSUS (8541.41.0000) classifications.

Frequently Asked Questions (FAQ)

Q: Can the MPC8-1YD110V directly replace the MPC6-1YD110V without modifications?

A: No. The substitute part differs in panel cutout diameter (0.31" versus 0.23"), termination style (Quick Connect versus Solder Lug), and light output intensity (20mcd versus 40mcd). Panel modification and connection method redesign are required.

Q: What is the primary reason for substitution?

A: The MPC6-1YD110V is classified as obsolete. The MPC8-1YD110V is an active product from the same manufacturer with matching electrical and optical specifications, ensuring continued availability for production and design requirements.

Q: Are the optical characteristics identical between the two parts?

A: The lamp color (yellow), lens transparency (diffused), wavelength peak (590nm), viewing angle (45°), and lens style (round with domed top) are identical. The millicandela rating differs: MPC6-1YD110V provides 40mcd while MPC8-1YD110V provides 20mcd.

Q: What environmental protection do both parts provide?

A: Both the MPC6-1YD110V and MPC8-1YD110V carry IP54 ingress protection ratings and MSL 1 (Unlimited) moisture sensitivity levels, indicating equivalent environmental sealing and handling requirements.

Q: Does the substitute part meet current regulatory standards?

A: Yes. The MPC8-1YD110V is RoHS3 compliant and carries the same ECCN (EAR99) and HTSUS (8541.41.0000) classifications as the original part, ensuring regulatory alignment.

Q: What packaging format is available for the substitute part?

A: The MPC8-1YD110V is supplied in bag packaging, with 1155 pieces available in current inventory as new original stock.