MPC6-1GD220V Panel Indicator Equivalent & Substitute Parts

Part Overview

The MPC6-1GD220V is a panel-mounted indicator light manufactured by Bivar Inc., designed for 220V AC applications with green diffused illumination. This component features a 3mm round lens with domed top, solder lug termination, and 45° viewing angle. The product is classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing system maintenance and new design implementations.

Substiute Parts

MPC6-1GD220V

Bivar Inc.In Stock: 866MPC6-1GD220V Datasheet

Current PartRFQ

MPC8-1GD220V

Bivar Inc.In Stock: 1048MPC8-1GD220V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPC6-1GD220V is based on the following critical parameters that must remain consistent:

Mandatory Matching Parameters:

• Voltage Rating: 220V
• Lamp Color: Green
• Lens Transparency: Diffused
• Panel Cutout Shape: Round
• Lens Style: Round with Domed Top
• Viewing Angle: 45°
• Ingress Protection: IP54

Parameters with Allowable Variation:

• Panel Cutout Dimensions: Larger cutout accommodates panel mounting flexibility
• Termination Style: Alternative connection methods (Quick Connect vs. Solder Lug) require circuit redesign
• Millicandela Rating: Variation in brightness output (80mcd to 60mcd) affects visibility performance
• Wavelength - Peak: Shift from 525nm to 515nm represents acceptable green spectrum variation

The MPC8-1GD220V qualifies as a substitute based on matching core electrical and optical specifications while accommodating mechanical and termination differences.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Solder Lug Termination Required):

The MPC6-1GD220V is obsolete with 842 units in current inventory. Direct replacement using identical termination style is not available from the provided substitute list. The MPC8-1GD220V operates at the same 220V rating with matching green diffused optics and IP54 protection, but requires circuit modification due to Quick Connect termination instead of solder lug connection.

Product Status Consideration:

The MPC8-1GD220V is classified as Active with ROHS3 compliance, ensuring long-term availability and regulatory alignment for new designs. The substitute part accommodates larger panel cutout dimensions (0.31" vs. 0.23"), which may require panel modification or acceptance of increased mounting clearance.

Brightness and Wavelength Variation:

The MPC8-1GD220V operates at 60mcd compared to the original 80mcd, representing a 25% reduction in light output. The wavelength shift from 525nm to 515nm remains within the green spectrum range. These optical differences are acceptable for applications where brightness reduction does not compromise visibility requirements.

Frequently Asked Questions (FAQ)

Q: Can the MPC8-1GD220V directly replace the MPC6-1GD220V without circuit modification?

A: No. While both parts share identical voltage rating, color, lens transparency, and viewing angle, the termination style differs. The MPC6-1GD220V uses solder lug termination, while the MPC8-1GD220V uses Quick Connect - 0.110" (2.8mm) termination. Circuit redesign is required for connector compatibility.

Q: What panel modifications are necessary for the MPC8-1GD220V substitution?

A: The panel cutout dimension increases from 0.23" (5.84mm) to 0.31" (7.87mm). Existing panel holes must be enlarged to accommodate the larger lens diameter of the substitute part.

Q: Does the 20mcd brightness reduction affect system performance?

A: The MPC8-1GD220V operates at 60mcd versus the original 80mcd. Brightness reduction depends on application requirements. For applications with ambient lighting or where indicator visibility is not critical, this reduction is acceptable. For high-visibility requirements, brightness performance must be evaluated against specific application standards.

Q: Is the MPC8-1GD220V suitable for new product designs?

A: Yes. The MPC8-1GD220V is classified as Active with ROHS3 compliance, ensuring regulatory compliance and long-term component availability for new designs. The Quick Connect termination provides advantages in manufacturing and field serviceability compared to solder lug connections.

Q: Are there wavelength compatibility concerns between 525nm and 515nm?

A: Both wavelengths fall within the green spectrum range. The 10nm shift from 525nm to 515nm represents a minor variation in green hue perception and does not affect functional compatibility in standard indicator applications.

Q: What is the inventory status for substitution planning?

A: The MPC6-1GD220V (obsolete) has 842 units in stock. The MPC8-1GD220V (active) has 960 units available. For long-term supply chain planning, the active status of MPC8-1GD220V provides superior availability assurance.