MPC5HDW6 LED Panel Indicator Equivalent & Substitute Parts

Part Overview

The MPC5HDW6 is a red diffused LED panel indicator manufactured by Bivar Inc., featuring a 5mm T-1 3/4 lens form factor with 2V forward voltage and 30mA maximum current rating. This component is classified as obsolete product status. Identification of equivalent and substitute parts is necessary to support ongoing maintenance, repair, and production requirements where original stock becomes unavailable or depleted.

Substiute Parts

MPC5HDW6

Bivar Inc.In Stock: 863MPC5HDW6 Datasheet

Current PartRFQ

MPC5HDW12.0

Bivar Inc.In Stock: 1189MPC5HDW12.0 Datasheet

SimilarRFQ

MPC5HDW6.0

Bivar Inc.In Stock: 897MPC5HDW6.0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MPC5HDW6 is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Manufacturer: Bivar Inc.
• Lamp Color: Red
• Lens Transparency: Diffused
• Voltage (Vf): 2V
• Lens Size: 5mm, T-1 3/4
• Lens Style: Round with Domed Top
• Panel Cutout Shape: Round
• Panel Cutout Dimensions: 0.32" (8.13mm)
• Wavelength - Peak: 625nm
• Viewing Angle: 45°
• Termination Style: Wire Leads

Parameters Permitting Variation:

• Current (If Max): Substitute parts may operate at equal or lower current ratings
• Termination Length: Wire lead length may differ while maintaining mechanical compatibility
• Millicandela Rating: Luminous intensity may vary within the product line
• Product Status: Active status substitutes are acceptable for obsolete parts
• Packaging: Variation in packaging format does not affect functional compatibility

The MPC5HDW6.0 and MPC5HDW12.0 satisfy these substitution criteria and are classified as equivalent alternatives.

Parameter Comparison

Engineering Selection Recommendations

MPC5HDW6.0 Selection Criteria:

The MPC5HDW6.0 is an active product with ROHS3 compliance certification. This substitute maintains identical mechanical compatibility with the MPC5HDW6, including panel cutout dimensions, lens form factor, and wire lead length of 6 inches. The maximum current rating of 20mA is lower than the original 30mA specification; therefore, circuit designs operating at currents exceeding 20mA are not compatible with this substitute. The luminous intensity rating of 25mcd is reduced compared to the original 30mcd specification. Applications requiring the full 30mA current capacity or 30mcd brightness must not use this substitute.

MPC5HDW12.0 Selection Criteria:

The MPC5HDW12.0 is an active product with ROHS3 compliance and REACH Unaffected status. This substitute maintains identical electrical specifications with the MPC5HDW6, including 2V voltage, 30mA maximum current, and 625nm wavelength. The primary difference is the wire lead length of 12 inches compared to 6 inches on the original part. Panel cutout dimensions and lens form factor remain identical. Applications with spatial constraints limiting wire lead length to 6 inches are not compatible with this substitute. The luminous intensity rating of 25mcd is reduced compared to the original 30mcd specification.

Compliance Considerations:

Both substitute parts carry active product status, ensuring continued availability and manufacturing support. ROHS3 compliance on both substitutes aligns with current environmental and regulatory requirements. The MPC5HDW12.0 carries explicit REACH Unaffected status, providing additional regulatory clarity for applications subject to REACH compliance verification.

Frequently Asked Questions (FAQ)

Q: Can MPC5HDW6.0 be used as a direct replacement for MPC5HDW6 in all applications?

A: No. The MPC5HDW6.0 has a maximum current rating of 20mA compared to 30mA on the original MPC5HDW6. Applications designed to operate at currents between 20mA and 30mA are not compatible with this substitute. Additionally, the luminous intensity is reduced from 30mcd to 25mcd. Verify circuit current requirements before substitution.

Q: What is the primary difference between MPC5HDW6.0 and MPC5HDW12.0?

A: The MPC5HDW12.0 features 12-inch wire leads compared to 6-inch leads on the MPC5HDW6.0. Electrically, the MPC5HDW12.0 maintains the full 30mA current rating of the original MPC5HDW6. Both substitutes have identical panel cutout dimensions and lens specifications. Wire lead length selection depends on physical layout and wiring distance requirements.

Q: Are both substitute parts mechanically compatible with the original MPC5HDW6 panel cutout?

A: Yes. Both MPC5HDW6.0 and MPC5HDW12.0 maintain the identical 0.32-inch (8.13mm) round panel cutout dimension and 5mm T-1 3/4 lens form factor. Mechanical panel mounting compatibility is preserved across all three parts.

Q: What compliance certifications apply to the substitute parts?

A: Both MPC5HDW6.0 and MPC5HDW12.0 carry ROHS3 compliance certification. The MPC5HDW12.0 additionally carries REACH Unaffected status. The original MPC5HDW6 does not specify compliance certifications. For applications requiring specific regulatory compliance, the active substitute parts provide documented certification.

Q: Can MPC5HDW12.0 be used in applications where the original MPC5HDW6 was specified?

A: Substitution is permissible only if circuit design accommodates the 12-inch wire lead length. All electrical parameters, including 2V voltage, 30mA maximum current, and 625nm wavelength, are compatible. The reduced luminous intensity of 25mcd versus 30mcd must be evaluated for visual indication adequacy in the specific application.

Q: What is the inventory status of these substitute parts?

A: MPC5HDW6 (original, obsolete): 767 pieces in stock. MPC5HDW6.0 (active): 808 pieces in stock. MPC5HDW12.0 (active): 1104 pieces in stock. Active product status on both substitutes ensures continued availability for future procurement.

Q: Are there packaging differences between the substitute parts?

A: Yes. MPC5HDW6.0 is supplied in tray packaging, while MPC5HDW12.0 is supplied in bag packaging. Packaging format does not affect functional compatibility or electrical performance. Selection between packaging options depends on inventory management and handling requirements.