MPC5GD5VW24.0 Equivalent & Substitute Parts

Part Overview

The MPC5GD5VW24.0 is a LED panel indicator manufactured by Bivar Inc., featuring a green diffused lens with 5mm T-1 3/4 form factor. This component is rated for 5V operation with a 40° viewing angle and 25mcd brightness output at 568nm peak wavelength. The part is classified as obsolete, necessitating identification of active equivalent alternatives for continued system support and procurement.

Substiute Parts

MPC5GD5VW24.0

Bivar Inc.In Stock: 1057MPC5GD5VW24.0 Datasheet

Current PartRFQ

MPC5GDW12.0

Bivar Inc.In Stock: 1720MPC5GDW12.0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MPC5GD5VW24.0 is determined by the following critical parameters:

Mechanical Compatibility: Panel cutout dimensions (0.32" / 8.13mm round), lens size (5mm T-1 3/4), and lens style (round with domed top) must remain identical to ensure physical fit within existing panel assemblies.

Optical Characteristics: Lamp color (green), lens transparency (diffused), peak wavelength (568nm), and millicandela rating (25mcd) establish functional equivalence for indicator visibility and color consistency.

Electrical Parameters: Operating voltage and current ratings determine circuit compatibility. The MPC5GD5VW24.0 operates at 5V; substitute parts must accommodate this voltage requirement or be compatible within the application's power delivery constraints.

Termination: Wire lead configuration must support the 24" lead length or be adaptable to existing wiring harnesses.

The MPC5GDW12.0 qualifies as a substitute based on matching mechanical form factor, optical properties, and color specification, despite differences in voltage rating, current specification, and lead length.

Parameter Comparison

Engineering Selection Recommendations

The MPC5GDW12.0 provides mechanical and optical equivalence to the obsolete MPC5GD5VW24.0. Both components share identical panel cutout dimensions, lens form factor, color specification, and brightness rating, enabling direct substitution in panel assembly applications.

The MPC5GDW12.0 carries active product status and ROHS3 compliance, supporting long-term procurement and regulatory requirements. The substitute part is available in higher inventory quantity (1651 Pcs) compared to the main part (1008 Pcs).

Electrical differences exist: the MPC5GDW12.0 operates at 2.1V with 30mA maximum current, whereas the MPC5GD5VW24.0 is rated for 5V operation. Circuit integration requires verification that the application's power supply and current-limiting resistor network can accommodate the lower voltage requirement of the substitute part.

Lead length differs: the MPC5GDW12.0 provides 12" (304.80mm) leads versus 24" (609.60mm) on the main part. Harness routing and connector placement must accommodate this reduction in lead length.

Frequently Asked Questions (FAQ)

Q: Can the MPC5GDW12.0 directly replace the MPC5GD5VW24.0 in existing assemblies?

A: Mechanical and optical substitution is direct. The MPC5GDW12.0 matches the panel cutout dimensions (0.32" round), lens size (5mm T-1 3/4), color (green), and brightness (25mcd). However, electrical circuit redesign is required due to voltage rating differences (2.1V vs. 5V) and lead length reduction (12" vs. 24").

Q: What are the critical parameters for determining LED panel indicator substitution?

A: Panel cutout dimensions, lens size, lens style, lamp color, lens transparency, peak wavelength, and millicandela rating establish functional equivalence. Voltage rating, current specification, and termination length determine circuit compatibility and installation feasibility.

Q: Why does the MPC5GDW12.0 have a lower voltage rating than the MPC5GD5VW24.0?

A: Voltage rating reflects the forward voltage (Vf) characteristic of the LED die and internal circuit design. The MPC5GDW12.0 operates at 2.1V typical forward voltage with 30mA maximum current. This parameter is provided in the component specification and must be accommodated in the application's power delivery design.

Q: Is the 12" lead length of the MPC5GDW12.0 sufficient for applications using the 24" lead length MPC5GD5VW24.0?

A: Lead length compatibility depends on harness routing, connector placement, and panel depth. The 12" reduction requires evaluation of the specific application layout. Custom harness fabrication or connector repositioning may be necessary.

Q: What compliance certifications apply to the MPC5GDW12.0?

A: The MPC5GDW12.0 is ROHS3 compliant and REACH unaffected. Both the main part and substitute carry ECCN EAR99 and HTSUS 8541.41.0000 classifications. Moisture sensitivity level is 1 (unlimited) for both components.

Q: Is the MPC5GDW12.0 the only available substitute for the MPC5GD5VW24.0?

A: Based on the provided substitute list, the MPC5GDW12.0 is identified as the equivalent part. Additional alternatives may exist within the Bivar Inc. MPC5 series; however, only the MPC5GDW12.0 is specified in this reference documentation.