MP8801DJ-2.5-LF-Z Equivalent & Substitute Parts

Part Overview

The MP8801DJ-2.5-LF-Z is a linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable linear regulator delivers 150mA output current in a compact TSOT-23-5 surface mount package. The device is currently in active production status with 35,200 units available in inventory.

Finding equivalent and substitute parts is necessary when the primary packaging format (Cut Tape) is unavailable, when supply chain constraints occur, or when alternative packaging configurations better suit manufacturing requirements while maintaining identical electrical performance.

Substiute Parts

MP8801DJ-2.5-LF-Z

Monolithic Power Systems Inc.In Stock: 35235MP8801DJ-2.5-LF-Z Datasheet

Current PartRFQ

MP8801DJ-2.5-LF-P

Monolithic Power Systems Inc.In Stock: 2126MP8801DJ-2.5-LF-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MP8801DJ-2.5-LF-Z is determined by strict equivalence across the following critical parameters:

• Output configuration (Positive)
• Output type (Adjustable/Fixed)
• Current rating (150mA)
• Voltage specifications (Input Max: 6.5V, Output Min/Fixed: 1.25V/2.5V, Output Max: 5V)
• Voltage dropout characteristics (0.125V @ 150mA Typ)
• Package type (SOT-23-5 Thin, TSOT-23-5)
• Mounting type (Surface Mount)
• Operating temperature range (-40°C ~ 85°C)
• Compliance certifications (ROHS3, REACH Unaffected)

The MP8801DJ-2.5-LF-P qualifies as a parametric equivalent substitute. The only difference between these parts is the packaging format: the primary part uses Cut Tape (CT) & Digi-Reel® packaging, while the substitute uses Tape & Reel (TR) packaging. All electrical specifications, performance characteristics, and regulatory compliance remain identical.

Parameter Comparison

Engineering Selection Recommendations

Both the MP8801DJ-2.5-LF-Z and MP8801DJ-2.5-LF-P are active production parts from Monolithic Power Systems Inc. with identical electrical specifications and regulatory compliance. Selection between these parts should be based on packaging requirements and supply availability.

The MP8801DJ-2.5-LF-Z in Cut Tape & Digi-Reel® format is suitable for applications requiring smaller order quantities or manual component handling. The MP8801DJ-2.5-LF-P in Tape & Reel format is optimized for high-volume automated assembly processes.

Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across global markets. The identical MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints for either packaging variant.

Frequently Asked Questions (FAQ)

Q: Can MP8801DJ-2.5-LF-P be used as a direct replacement for MP8801DJ-2.5-LF-Z?

A: Yes. These parts are parametric equivalents with identical electrical performance, voltage specifications, current ratings, and operating characteristics. The only difference is packaging format (Cut Tape vs. Tape & Reel). Both are suitable for the same circuit applications without modification.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) & Digi-Reel® packaging provides individual component strips suitable for lower-volume orders and manual pick-and-place operations. Tape & Reel (TR) packaging supplies components on continuous reels optimized for automated high-speed assembly equipment. The components themselves are electrically identical.

Q: Are there any compliance or certification differences between these parts?

A: No. Both MP8801DJ-2.5-LF-Z and MP8801DJ-2.5-LF-P carry identical ROHS3 compliance, REACH unaffected status, and MSL ratings. Regulatory and environmental certifications are equivalent.

Q: Which part should I select for my application?

A: Selection depends on your manufacturing process. Use MP8801DJ-2.5-LF-Z for manual assembly or low-volume production. Use MP8801DJ-2.5-LF-P for automated assembly lines and high-volume manufacturing. Both deliver identical performance in the circuit.

Q: Do these parts have the same thermal and electrical performance?

A: Yes. Both parts share identical voltage dropout specifications (0.125V @ 150mA Typ), quiescent current (150 µA), PSRR characteristics (70db ~ 30dB across 1kHz ~ 1MHz), and operating temperature range (-40°C ~ 85°C). Thermal and electrical performance is equivalent.