MP7200GLE-P LED Driver IC Equivalent & Substitute Parts

Part Overview

The MP7200GLE-P is an active LED Driver IC manufactured by Monolithic Power Systems Inc., classified as a Power Management PMIC. This device integrates a DC-DC regulator with PWM dimming capability, supporting both step-down (buck) and step-up (boost) topologies in a single output configuration. The part operates across a 6V to 42V supply range with output current capability of 1.2A and 3A, switching at 2.3MHz frequency.

The MP7200GLE-P is actively produced and maintained by the manufacturer. Substitute parts are identified to provide design flexibility, inventory optimization, and supply chain continuity when the primary part number becomes unavailable or when alternative packaging designations are required for specific procurement channels.

Substiute Parts

MP7200GLE-P

Monolithic Power Systems Inc.In Stock: 1515MP7200GLE-P Datasheet

Current PartRFQ

MP7200GLE-Z

Monolithic Power Systems Inc.In Stock: 6032MP7200GLE-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MP7200GLE-P are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Topology and Regulation Type: Step-Down (Buck) and Step-Up (Boost) dual-mode operation
• Output Configuration: Single output channel
• Supply Voltage Range: 6V minimum to 42V maximum
• Output Current Capability: 1.2A and 3A ratings
• Switching Frequency: 2.3MHz operation
• Dimming Method: PWM-based dimming control
• Package Specification: 19-QFN (3x4) with PowerVFQFN designation
• Mounting Technology: Surface mount with wettable flank
• Thermal Operating Range: -40°C to 125°C junction temperature
• Compliance Standards: ROHS3 compliance, REACH unaffected status

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Differences in packaging designations (such as tape & reel suffix codes) do not affect functional or electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The MP7200GLE-P and MP7200GLE-Z are parametric equivalents with identical electrical specifications, package geometry, and compliance certifications. Both parts are actively manufactured by Monolithic Power Systems Inc. and maintain ROHS3 compliance with REACH unaffected status.

Selection between these parts is determined by:

1. Procurement Channel Requirements: The suffix designations (-P and -Z) reflect different packaging or distribution channel specifications. Verify with your supplier which designation aligns with your procurement requirements.

2. Inventory Availability: MP7200GLE-Z currently maintains higher inventory levels (5949 pieces) compared to MP7200GLE-P (1505 pieces). For time-sensitive applications, inventory status may influence part selection.

3. Supply Chain Continuity: Both parts share the same base product number (MP7200) and are produced by the same manufacturer. Either part provides equivalent supply chain continuity.

4. Compliance and Certification: Both parts satisfy identical regulatory requirements for ROHS3 compliance, REACH compliance status, and moisture sensitivity classification. No compliance differentiation exists between the two parts.

5. Thermal and Electrical Performance: Identical operating temperature ranges (-40°C to 125°C) and electrical specifications ensure equivalent performance in all application contexts.

Frequently Asked Questions (FAQ)

Q: Are MP7200GLE-P and MP7200GLE-Z electrically interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, including supply voltage range (6V to 42V), output current capability (1.2A, 3A), switching frequency (2.3MHz), and PWM dimming control. They are direct substitutes for each other.

Q: Can I use MP7200GLE-Z as a drop-in replacement for MP7200GLE-P on the same PCB?

A: Yes. Both parts use the identical 19-PowerVFQFN (3x4) package with surface mount, wettable flank mounting technology. Pin configuration, footprint, and thermal characteristics are identical, enabling direct PCB substitution without layout modifications.

Q: What do the suffix designations (-P and -Z) represent?

A: The suffix designations indicate different packaging or distribution channel specifications assigned by the manufacturer. Both suffixes refer to the same core device (MP7200GLE) with identical electrical and mechanical properties. The suffix does not affect functional performance or compatibility.

Q: Are there any temperature or operating condition differences between these parts?

A: No. Both parts operate across the identical temperature range of -40°C to 125°C junction temperature. Thermal performance, frequency stability, and output current ratings are identical across the full operating range.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MP7200GLE-P and MP7200GLE-Z are ROHS3 compliant, REACH unaffected, and classified as Moisture Sensitivity Level 1 (unlimited). No compliance differentiation exists between the two parts.

Q: Which part should I select if both are available?

A: Selection is based on procurement requirements and inventory availability. If your supply chain or procurement system specifies a particular suffix designation, use that part. If no specific requirement exists, either part provides identical functionality. Current inventory levels show MP7200GLE-Z has higher availability.

Q: Can I mix MP7200GLE-P and MP7200GLE-Z in the same production batch?

A: Yes. Since both parts are parametric equivalents with identical specifications, they can be used interchangeably within the same design and production batch without affecting performance, reliability, or compliance.

Q: What is the base product number for these parts?

A: The base product number is MP7200. Both MP7200GLE-P and MP7200GLE-Z are variants of this base product, differentiated only by packaging or distribution channel designations.