MP6652AGJS-0000-Z Equivalent & Substitute Parts

Part Overview

The MP6652AGJS-0000-Z is an 18V single-phase brushless DC (BLDC) motor driver manufactured by Monolithic Power Systems Inc. This integrated power management IC combines control and power stage functionality in a compact SOT-23-6 surface mount package. The device is classified as obsolete, making identification of active equivalent parts essential for ongoing design support and procurement continuity.

Substiute Parts

MP6652AGJS-0000-Z

Monolithic Power Systems Inc.In Stock: 947MP6652AGJS-0000-Z Datasheet

Current PartRFQ

MP6654GJS-0000-P

Monolithic Power Systems Inc.In Stock: 832MP6654GJS-0000-P Datasheet

Parametric EquivalentRFQ

MP6654GJS-0000-Z

Monolithic Power Systems Inc.In Stock: 768MP6654GJS-0000-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MP6652AGJS-0000-Z is determined by strict equivalence across the following parameters:

• Motor driver type: Brushless DC (BLDC) with bipolar configuration
• Output stage: Half bridge (2) topology with Power MOSFET technology
• Control interface: PWM-based
• Electrical specifications: 1A output current, 3V ~ 18V supply and load voltage range
• Thermal rating: -40°C ~ 125°C operating temperature
• Physical form factor: SOT-23-6 surface mount package
• Moisture sensitivity: MSL 1 (Unlimited)

The substitute parts MP6654GJS-0000-P and MP6654GJS-0000-Z maintain identical electrical and mechanical specifications to the main part. The primary distinction is product status: both substitutes are classified as active, whereas the MP6652AGJS-0000-Z is obsolete.

Parameter Comparison

Engineering Selection Recommendations

Both MP6654GJS-0000-P and MP6654GJS-0000-Z are direct parametric equivalents to the obsolete MP6652AGJS-0000-Z. Selection between the two active substitutes should be based on packaging requirements and procurement logistics. The MP6654GJS-0000-P and MP6654GJS-0000-Z are functionally identical with respect to electrical performance, thermal characteristics, and mechanical form factor. Current inventory levels are 793 units and 745 units respectively, providing adequate supply for component selection.

Frequently Asked Questions (FAQ)

Q: Can MP6654GJS-0000-P and MP6654GJS-0000-Z be used interchangeably with MP6652AGJS-0000-Z?

A: Yes. Both substitute parts maintain identical electrical specifications (1A output current, 3V ~ 18V supply/load voltage), thermal ratings (-40°C ~ 125°C), and physical packaging (SOT-23-6 surface mount). Pin configuration and functional behavior are equivalent.

Q: What is the difference between MP6654GJS-0000-P and MP6654GJS-0000-Z?

A: Both parts are electrically and mechanically identical. The difference is packaging format: MP6654GJS-0000-P is supplied in bulk packaging, as is MP6654GJS-0000-Z. Selection should be based on procurement and handling requirements.

Q: Why is the original MP6652AGJS-0000-Z classified as obsolete?

A: Product status reflects manufacturer lifecycle decisions. The active equivalents MP6654GJS-0000-P and MP6654GJS-0000-Z provide continued design support with identical performance characteristics.

Q: Are there any pin or footprint compatibility concerns?

A: No. All three parts use the SOT-23-6 Thin, Flat Leads package with identical pinout and footprint. Direct PCB substitution is supported without layout modifications.

Q: What is the moisture sensitivity rating, and does it affect handling?

A: All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling procedures apply without special storage or baking requirements.