MP6652AGJS-0000-P Equivalent & Substitute Parts

Part Overview

The MP6652AGJS-0000-P is an 18V single-phase brushless DC (BLDC) motor driver manufactured by Monolithic Power Systems Inc. This integrated power management IC combines control and power stage functionality in a compact SOT-23-6 surface mount package. The device is classified as obsolete, making identification of active equivalent parts essential for ongoing design support and procurement continuity.

Substiute Parts

MP6652AGJS-0000-P

Monolithic Power Systems Inc.In Stock: 995MP6652AGJS-0000-P Datasheet

Current PartRFQ

MP6654GJS-0000-P

Monolithic Power Systems Inc.In Stock: 832MP6654GJS-0000-P Datasheet

Parametric EquivalentRFQ

MP6654GJS-0000-Z

Monolithic Power Systems Inc.In Stock: 768MP6654GJS-0000-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MP6652AGJS-0000-P is determined by strict equivalence across the following parameters:

• Motor control type: Brushless DC (BLDC) with bipolar configuration
• Integrated function: Fully integrated control and power stage
• Output topology: Half bridge (2) configuration
• Interface protocol: PWM control
• Power technology: Power MOSFET
• Output current rating: 1A
• Supply and load voltage range: 3V ~ 18V
• Operating temperature range: -40°C ~ 125°C
• Package form factor: SOT-23-6 surface mount
• Manufacturer: Monolithic Power Systems Inc.

The substitute parts MP6654GJS-0000-P and MP6654GJS-0000-Z maintain identical electrical and mechanical specifications to the main part, with the primary distinction being product status (active versus obsolete) and packaging designation.

Parameter Comparison

Engineering Selection Recommendations

Both MP6654GJS-0000-P and MP6654GJS-0000-Z are direct functional equivalents to the obsolete MP6652AGJS-0000-P. Selection between these active alternatives should be based on packaging and procurement requirements:

MP6654GJS-0000-P carries bulk packaging designation and maintains active product status with 793 units in stock inventory.

MP6654GJS-0000-Z carries bulk packaging designation and maintains active product status with 745 units in stock inventory.

Both parts satisfy identical electrical and mechanical requirements for BLDC motor driver applications within the specified voltage and current parameters. The transition from the obsolete MP6652AGJS-0000-P to either active substitute ensures continued design support and component availability.

Frequently Asked Questions (FAQ)

Q: Can MP6654GJS-0000-P and MP6654GJS-0000-Z be used interchangeably with MP6652AGJS-0000-P?

A: Yes. Both substitute parts maintain identical electrical specifications, output current rating (1A), voltage range (3V ~ 18V), operating temperature range (-40°C ~ 125°C), and physical package form factor (SOT-23-6 surface mount). Pin configuration and functional behavior are equivalent.

Q: What is the primary reason for substitution?

A: The MP6652AGJS-0000-P is classified as obsolete. The MP6654GJS-0000-P and MP6654GJS-0000-Z are active equivalents that provide continued component availability and manufacturer support.

Q: Are there differences between MP6654GJS-0000-P and MP6654GJS-0000-Z?

A: Both parts are parametrically identical. The designation difference reflects packaging and inventory tracking. Selection may be based on supplier availability and procurement lead times.

Q: Is PCB layout modification required when substituting these parts?

A: No. All three parts use the identical SOT-23-6 surface mount package with the same pin configuration, eliminating the need for PCB redesign.

Q: What applications are these parts suitable for?

A: These integrated BLDC motor drivers are specified for fan motor driver applications and other brushless DC motor control circuits operating within the 3V ~ 18V supply range at up to 1A output current.