MP6650GJS-0000-P Equivalent & Substitute Parts

Part Overview

The MP6650GJS-0000-P is an 18V, 2A single-phase brushless DC (BLDC) motor driver manufactured by Monolithic Power Systems Inc. This unipolar motor driver integrates Power MOSFET technology with PWM control in a compact SOT-23-6 surface mount package. The device operates across a supply voltage range of 3.3V to 18V and maintains functionality across an operating temperature range of -40°C to 125°C (junction temperature).

The MP6650GJS-0000-P is classified as an active product with ROHS3 compliance and REACH unaffected status. Substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when inventory constraints necessitate equivalent alternatives that maintain identical electrical and mechanical specifications.

Substiute Parts

MP6650GJS-0000-P

Monolithic Power Systems Inc.In Stock: 1543MP6650GJS-0000-P Datasheet

Current PartRFQ

MP6650GJS-0000-Z

Monolithic Power Systems Inc.In Stock: 5863MP6650GJS-0000-Z Datasheet

Parametric EquivalentRFQ

MP6650GJSR-0000-P

Monolithic Power Systems Inc.In Stock: 1464MP6650GJSR-0000-P Datasheet

Parametric EquivalentRFQ

MP6650GJSR-0000-Z

Monolithic Power Systems Inc.In Stock: 6130MP6650GJSR-0000-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MP6650GJS-0000-P is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Motor Type: Brushless DC (BLDC) with Unipolar configuration
• Output Configuration: Half Bridge (2)
• Interface: PWM control
• Current Rating: 2A output
• Supply Voltage Range: 3.3V ~ 18V
• Operating Temperature Range: -40°C ~ 125°C (TJ)
• Technology: Power MOSFET

Mechanical & Packaging Criteria:

• Mounting Type: Surface Mount
• Package / Case: SOT-23-6 Thin, Flat Leads
• Manufacturer: Monolithic Power Systems Inc.
• Base Product Number: MP6650

Compliance Criteria:

• Product Status: Active
• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

All substitute parts listed maintain identical electrical specifications and functional performance. Variations exist only in supplier device package designation (TSOT-23-6-SL versus TSOT-23-6-RSL) and packaging format (Cut Tape versus Cut Tape & Digi-Reel®), which do not affect circuit-level compatibility or performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

All four substitute parts—MP6650GJS-0000-Z, MP6650GJSR-0000-P, and MP6650GJSR-0000-Z—are direct functional equivalents to the MP6650GJS-0000-P. Selection among these alternatives is determined by packaging and supply chain requirements rather than electrical performance.

MP6650GJS-0000-Z maintains identical supplier device package designation (TSOT-23-6-SL) and differs only in packaging format (Cut Tape). This part is suitable for applications requiring standard cut tape delivery.

MP6650GJSR-0000-P and MP6650GJSR-0000-Z feature an alternative supplier device package designation (TSOT-23-6-RSL) and are available in Cut Tape & Digi-Reel® format. These variants are appropriate for high-volume manufacturing environments utilizing automated reel-based component handling systems.

All substitute parts maintain active product status, ROHS3 compliance, and REACH unaffected classification. Moisture Sensitivity Level (MSL) rating of 1 (Unlimited) is specified for the substitute parts, indicating no moisture sensitivity constraints during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can MP6650GJS-0000-Z be used as a direct replacement for MP6650GJS-0000-P?

A: Yes. Both parts share identical electrical specifications, functional performance, and supplier device package designation (TSOT-23-6-SL). The only difference is packaging format: MP6650GJS-0000-Z is supplied in Cut Tape format, while MP6650GJS-0000-P is also supplied in Cut Tape format. Both are electrically and mechanically interchangeable at the circuit level.

Q: What is the difference between TSOT-23-6-SL and TSOT-23-6-RSL package designations?

A: TSOT-23-6-SL and TSOT-23-6-RSL are supplier device package designations that indicate different tape and reel configurations for manufacturing and assembly processes. Both maintain the same SOT-23-6 physical form factor and pin configuration. The selection between these designations depends on manufacturing equipment compatibility and supply chain preferences, not circuit performance.

Q: Are MP6650GJSR-0000-P and MP6650GJSR-0000-Z suitable for automated pick-and-place assembly?

A: Yes. Both MP6650GJSR-0000-P and MP6650GJSR-0000-Z are available in Cut Tape & Digi-Reel® packaging format, which is designed for automated component handling systems. The Digi-Reel® format provides compatibility with standard reel-based assembly equipment.

Q: Do all substitute parts maintain the same operating temperature range?

A: Yes. All substitute parts—MP6650GJS-0000-Z, MP6650GJSR-0000-P, and MP6650GJSR-0000-Z—operate across the identical temperature range of -40°C to 125°C (junction temperature).

Q: What is the significance of Moisture Sensitivity Level (MSL) 1 (Unlimited) on the substitute parts?

A: MSL 1 (Unlimited) indicates that the component has no moisture sensitivity constraints. These parts do not require special moisture control measures during storage, handling, or assembly, providing greater flexibility in manufacturing environments.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts—MP6650GJS-0000-Z, MP6650GJSR-0000-P, and MP6650GJSR-0000-Z—are ROHS3 compliant and REACH unaffected, maintaining identical regulatory compliance status to the primary part number MP6650GJS-0000-P.

Q: Can I mix different substitute part numbers within the same production batch?

A: Yes. All substitute parts maintain identical electrical specifications, functional performance, and physical form factor. Mixing different part numbers within the same batch does not affect circuit performance or reliability. However, packaging format differences (Cut Tape versus Cut Tape & Digi-Reel®) may require different handling procedures during assembly.