MP6535GU-Z Equivalent & Substitute Parts

Part Overview

The MP6535GU-Z is an active multiphase motor driver IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This device functions as a commutation and direction management controller for brushless DC (BLDC) and multiphase stepper motors, utilizing Power MOSFET technology with PWM interface control. The part is supplied in a 40-QFN (5x5) package with exposed pad and operates across a 5V to 55V supply voltage range. Equivalent and substitute parts are identified based on matching electrical specifications, package configuration, and functional capabilities within the same product family.

Substiute Parts

MP6535GU-Z

Monolithic Power Systems Inc.In Stock: 1084MP6535GU-Z Datasheet

Current PartRFQ

MP6534GU-P

Monolithic Power Systems Inc.In Stock: 1024MP6534GU-P Datasheet

Parametric EquivalentRFQ

MP6534GU-Z

Monolithic Power Systems Inc.In Stock: 2284MP6534GU-Z Datasheet

Parametric EquivalentRFQ

MP6535GU-P

Monolithic Power Systems Inc.In Stock: 1193MP6535GU-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MP6535GU-Z are identified within the Monolithic Power Systems multiphase motor driver family based on strict parameter matching. All substitute parts maintain identical electrical specifications including 5V to 55V supply voltage range, -40°C to 125°C operating temperature, PWM interface, three half-bridge pre-driver outputs, and Power MOSFET technology. All parts are housed in the 40-QFN (5x5) package with exposed pad configuration and are surface mount components.

Substitution is valid across the following part number variants:

• MP6534GU-P (Tape & Reel packaging)
• MP6534GU-Z (standard packaging)
• MP6535GU-P (Tape & Reel packaging)

These parts differ only in packaging format (Tape & Reel versus standard) and base product number designation (MP6534 versus MP6535 series), with no impact on electrical performance or functional capability.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain active product status with Monolithic Power Systems Inc. and carry identical ROHS3 compliance and REACH unaffected certifications. Selection between MP6535GU-Z, MP6534GU-P, MP6534GU-Z, and MP6535GU-P is determined by packaging requirements and supply chain availability rather than electrical or functional differences.

For applications requiring Tape & Reel packaging format, MP6534GU-P and MP6535GU-P are appropriate selections. For standard packaging format, MP6534GU-Z and MP6535GU-Z are suitable. All parts support identical motor control applications including multiphase stepper motor commutation and brushless DC motor direction management across the full 5V to 55V supply voltage range and -40°C to 125°C operating temperature specification.

Frequently Asked Questions (FAQ)

Q: Are MP6535GU-Z and MP6534GU-Z electrically identical? A: Yes. Both parts share identical electrical specifications, functional capabilities, supply voltage range (5V to 55V), operating temperature range (-40°C to 125°C), output configuration (three half-bridge pre-drivers), PWM interface, and 40-QFN (5x5) package configuration. The base product number designation (MP6535 versus MP6534) does not reflect electrical differences.

Q: What is the difference between Tape & Reel and standard packaging? A: Tape & Reel packaging (suffix -P) is supplied on continuous carrier tape suitable for automated assembly equipment. Standard packaging (suffix -Z) uses alternative delivery format. Electrical and functional performance are identical between packaging variants.

Q: Can MP6535GU-P be substituted for MP6535GU-Z in a design? A: Yes, provided the assembly process accommodates the packaging format. MP6535GU-P is supplied in Tape & Reel format while MP6535GU-Z uses standard packaging. All electrical specifications and functional capabilities are identical.

Q: Are all substitute parts RoHS3 compliant? A: Yes. MP6535GU-Z, MP6534GU-P, MP6534GU-Z, and MP6535GU-P are all ROHS3 compliant with MSL rating of 2 (1 Year) and REACH unaffected status.

Q: What motor types are supported by these parts? A: All substitute parts support multiphase stepper motors and brushless DC (BLDC) motors through commutation and direction management control functions with three half-bridge pre-driver outputs.