MP6507GR-Z Equivalent & Substitute Parts

Part Overview

The MP6507GR-Z is an active, production-status bipolar motor driver IC manufactured by Monolithic Power Systems Inc. This fully integrated power management IC combines control and power stage functionality in a 16-QFN surface mount package. The device supports both stepper and brushed DC motor applications with parallel interface control, operating across a 2.7V to 15V supply range. Substitute parts are identified when packaging or procurement requirements differ while maintaining identical electrical and mechanical specifications.

Substiute Parts

MP6507GR-Z

Monolithic Power Systems Inc.In Stock: 22676MP6507GR-Z Datasheet

Current PartRFQ

MP6507GR-P

Monolithic Power Systems Inc.In Stock: 1214MP6507GR-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP6507GR-Z has one identified substitute part: MP6507GR-P. Both parts share identical electrical and mechanical specifications, differing only in packaging format. Substitution is valid when the following parameters match:

Motor driver functionality (bipolar stepper and brushed DC support), output configuration (4 half-bridge stages), parallel interface control, 700mA output current capability, 2.7V to 15V supply voltage range, 16-QFN package form factor, surface mount technology, and operating temperature range of -40°C to 125°C. Both parts maintain ROHS3 compliance, MSL Level 1 rating, and active product status.

Parameter Comparison

Engineering Selection Recommendations

Both MP6507GR-Z and MP6507GR-P are active production parts with identical electrical performance and regulatory compliance. Selection between these parts depends on procurement and assembly requirements. The MP6507GR-Z is supplied in tube packaging, while the MP6507GR-P is supplied in tape and reel format. For high-volume automated assembly operations, tape and reel packaging (MP6507GR-P) is standard. For lower-volume applications or manual assembly, tube packaging (MP6507GR-Z) may be preferred. Both parts maintain ROHS3 compliance and REACH unaffected status, suitable for regulated applications.

Frequently Asked Questions (FAQ)

Q: Are MP6507GR-Z and MP6507GR-P electrically identical?

A: Yes. Both parts are manufactured by Monolithic Power Systems Inc. and share identical electrical specifications, including 700mA output current, 2.7V to 15V supply voltage range, bipolar stepper and brushed DC motor support, and -40°C to 125°C operating temperature range.

Q: What is the only difference between these two parts?

A: The packaging format. MP6507GR-Z is supplied in tube packaging, while MP6507GR-P is supplied in tape and reel format. The physical component and die are identical.

Q: Can I substitute MP6507GR-P for MP6507GR-Z in my design?

A: Yes, from an electrical and mechanical standpoint. Both parts use the same 16-QFN package with exposed pad and surface mount technology. Substitution is valid for all circuit applications. Verify your assembly process accommodates the tape and reel format if switching from tube packaging.

Q: Are both parts RoHS compliant?

A: Yes. Both MP6507GR-Z and MP6507GR-P are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for restricted substance use.

Q: Which part should I specify for high-volume production?

A: MP6507GR-P (tape and reel format) is standard for high-volume automated assembly. MP6507GR-Z (tube packaging) is suitable for lower-volume or manual assembly operations.