MP62340DH-1-LF-Z Equivalent & Substitute Parts

Part Overview

The MP62340DH-1-LF-Z is a Power Switch/Driver IC manufactured by Monolithic Power Systems Inc., configured as a 1:2 power distribution switch with 1A output capability in an 8-MSOP package with exposed pad. This component is classified as Not For New Designs, making identification of active equivalent parts essential for ongoing production support and design continuity.

Substiute Parts

MP62340DH-1-LF-Z

Monolithic Power Systems Inc.In Stock: 2401MP62340DH-1-LF-Z Datasheet

Current PartRFQ

MP62341DH-LF-P

Monolithic Power Systems Inc.In Stock: 802MP62341DH-LF-P Datasheet

Parametric EquivalentRFQ

MP62341DH-LF-Z

Monolithic Power Systems Inc.In Stock: 1833MP62341DH-LF-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MP62340DH-1-LF-Z is determined by strict equivalence across the following critical parameters:

• Switch Type: General Purpose
• Number of Outputs: 2
• Input:Output Ratio: 1:2
• Output Configuration: High Side
• Voltage - Load: 2.7V ~ 5.5V
• Current - Output (Max): 1A
• Rds On (Typ): 85mOhm
• Features: Load Discharge, Status Flag
• Fault Protection: Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
• Operating Temperature: -40°C ~ 85°C (TA)
• Package / Case: 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 2 (1 Year)

The identified substitutes are active product variants from the same manufacturer base series (MP62341), maintaining identical electrical and mechanical specifications while offering improved product lifecycle status.

Parameter Comparison

Engineering Selection Recommendations

Both MP62341DH-LF-P and MP62341DH-LF-Z are direct functional equivalents to the MP62340DH-1-LF-Z, with the primary distinction being product lifecycle status. The MP62340DH-1-LF-Z is designated Not For New Designs, while both MP62341 variants maintain Active status.

For applications requiring ongoing component availability and long-term supply chain stability, MP62341DH-LF-Z is preferred due to higher inventory levels (1820 Pcs) compared to MP62341DH-LF-P (720 Pcs). Both variants are ROHS3 compliant and maintain identical electrical performance, thermal characteristics, and fault protection mechanisms.

All three parts are surface-mount components in the 8-MSOP package with exposed pad, suitable for automated assembly processes. Packaging format differences (Tape & Reel) do not affect functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can MP62341DH-LF-P and MP62341DH-LF-Z be used interchangeably with MP62340DH-1-LF-Z?

A: Yes. Both MP62341 variants are parametric equivalents with identical electrical specifications, output configuration, protection features, and package dimensions. The primary difference is product lifecycle status and available inventory.

Q: What is the significance of the "Not For New Designs" status on the MP62340DH-1-LF-Z?

A: This designation indicates the part is in end-of-life phase and is not recommended for new product development. Existing inventory remains available for legacy system support. Active alternatives should be selected for new designs.

Q: Are there package compatibility concerns when substituting these parts?

A: No. All three parts use identical 8-MSOP packaging with exposed pad (0.118", 3.00mm width). PCB footprints and assembly processes remain unchanged.

Q: Do the substitute parts maintain the same fault protection capabilities?

A: Yes. Both MP62341 variants include identical fault protection: Current Limiting (Fixed), Over Temperature, Reverse Current, and UVLO (Under Voltage Lock Out).

Q: What is the difference between MP62341DH-LF-P and MP62341DH-LF-Z?

A: Both are Active products with identical electrical and mechanical specifications. The suffix designates packaging format (P and Z variants). Selection should be based on inventory availability and supply chain requirements.