MP6005AGQ-Z Equivalent & Substitute Parts

Part Overview

The MP6005AGQ-Z is an offline flyback and forward topology power management integrated circuit manufactured by Monolithic Power Systems Inc. This PMIC operates across an input voltage range of 8V to 80V with a switching frequency of 420kHz and is housed in a 10-QFN (3x3) surface mount package. The device features isolated output topology with comprehensive fault protection including current limiting, overload, over-temperature, over-voltage, and short-circuit protection.

The MP6005AGQ-Z is classified as an Active product with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified based on identical electrical specifications and mechanical compatibility, allowing for component selection flexibility across different packaging formats and inventory availability.

Substiute Parts

MP6005AGQ-Z

Monolithic Power Systems Inc.In Stock: 5167MP6005AGQ-Z Datasheet

Current PartRFQ

MP6005AGQ-P

Monolithic Power Systems Inc.In Stock: 1153MP6005AGQ-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MP6005AGQ-Z is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part MP6005AGQ-P maintains identical specifications in the following key areas:

Electrical Equivalence Criteria:

• Input voltage supply range: 8V ~ 80V
• Switching frequency: 420kHz
• Topology classification: Flyback, Forward
• Output isolation: Isolated
• Duty cycle: 70%
• Start-up voltage: 5.5V
• Operating temperature range: -40°C ~ 125°C (TJ)
• Fault protection suite: Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
• Control features: EN, Frequency Control, Soft Start, Sync

Mechanical Equivalence Criteria:

• Package type: 10-VFDFN Exposed Pad
• Supplier device package: 10-QFN (3x3)
• Mounting type: Surface Mount
• Base product number: MP6005

Compliance Equivalence:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99
• HTSUS: 8542.39.0001

The only difference between the main part and substitute is the packaging format: MP6005AGQ-Z is supplied in Cut Tape (CT) format, while MP6005AGQ-P is supplied in Tape & Reel (TR) format.

Parameter Comparison

Engineering Selection Recommendations

Both MP6005AGQ-Z and MP6005AGQ-P are Active products manufactured by Monolithic Power Systems Inc. with identical electrical specifications and mechanical form factors. Selection between these parts is determined by packaging and supply chain requirements rather than functional performance.

MP6005AGQ-Z (Cut Tape Format) is appropriate for:

• Lower volume applications
• Component kits and assortments
• Manual assembly processes
• Applications requiring smaller initial quantities

MP6005AGQ-P (Tape & Reel Format) is appropriate for:

• High-volume production runs
• Automated pick-and-place assembly
• Applications requiring bulk component quantities
• Manufacturing environments with reel-fed component handling systems

Both parts maintain ROHS3 compliance, REACH unaffected status, and identical fault protection and control feature sets. The choice between Cut Tape and Tape & Reel packaging does not affect electrical performance, thermal characteristics, or reliability in the application circuit.

Frequently Asked Questions (FAQ)

Q: Are MP6005AGQ-Z and MP6005AGQ-P electrically identical?

A: Yes. Both parts operate across the same 8V to 80V input voltage range, switch at 420kHz, feature isolated output topology, and provide identical fault protection and control features. All electrical specifications are equivalent.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging supplies individual components cut from a continuous tape, suitable for lower volumes and manual handling. Tape & Reel (TR) packaging supplies components on continuous reels, optimized for automated assembly equipment and high-volume production.

Q: Can I substitute MP6005AGQ-P for MP6005AGQ-Z in my design?

A: Yes. The parts are functionally equivalent. Substitution is limited only by assembly process compatibility. If your manufacturing process uses automated pick-and-place equipment, MP6005AGQ-P (Tape & Reel) is the appropriate choice. If your process uses manual assembly or component kits, MP6005AGQ-Z (Cut Tape) is suitable.

Q: Do both parts have the same thermal operating range?

A: Yes. Both MP6005AGQ-Z and MP6005AGQ-P operate across -40°C to 125°C junction temperature range.

Q: Are there any compliance differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and share the same ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

Q: What is the moisture sensitivity rating for these parts?

A: Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Can I use either part in a flyback topology application?

A: Yes. Both MP6005AGQ-Z and MP6005AGQ-P support flyback and forward topologies with isolated output configuration.

Q: Are the package dimensions identical?

A: Yes. Both parts use the 10-VFDFN Exposed Pad package with 10-QFN (3x3) supplier device package designation, ensuring identical PCB footprint and mounting requirements.