MP5087AGG-Z Equivalent & Substitute Parts

Part Overview

The MP5087AGG-Z is an active power switch IC manufactured by Monolithic Power Systems Inc., designed for general-purpose high-side P-channel switching applications. This device integrates a 1:1 power switch/driver with integrated protection features including current limiting, over-temperature monitoring, and under-voltage lockout (UVLO). The part is currently in active production status with 8261 units available in inventory. Alternative equivalent parts may be required due to supply constraints, regional availability, or specific packaging preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

MP5087AGG-Z

Monolithic Power Systems Inc.In Stock: 8277MP5087AGG-Z Datasheet

Current PartRFQ

MP5087AGG-P

Monolithic Power Systems Inc.In Stock: 6452MP5087AGG-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP5087AGG-Z has one parametric equivalent substitute: MP5087AGG-P. Both parts are manufactured by Monolithic Power Systems Inc. and share identical electrical and mechanical specifications. The substitution is valid based on the following critical parameters that define functional equivalence:

• Output Type: P-Channel high-side switch
• Current Rating: 7A maximum output current
• Voltage Range: 0.5V ~ 5.5V load voltage, 3V ~ 5.5V supply voltage
• On-Resistance: 10mOhm typical
• Package: 12-VFQFN (2x2) surface mount
• Protection Features: Current limiting, over-temperature, UVLO
• Operating Temperature Range: -40°C ~ 125°C
• Compliance: ROHS3 compliant, REACH unaffected

The difference between MP5087AGG-Z and MP5087AGG-P is limited to packaging format (Cut Tape vs. Digi-Reel) and does not affect electrical performance or pin compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both MP5087AGG-Z and MP5087AGG-P are active production parts from Monolithic Power Systems Inc. with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Packaging format availability: MP5087AGG-Z is supplied in Cut Tape format, while MP5087AGG-P is supplied in Digi-Reel format
• Inventory levels: MP5087AGG-Z has 8261 units available; MP5087AGG-P has 6400 units available
• Supply chain requirements: Choose based on your procurement system's compatibility with tape or reel packaging

Both parts are electrically and mechanically identical and can be used interchangeably in circuit designs without modification to PCB layout, schematic, or firmware.

Frequently Asked Questions (FAQ)

Q: Can MP5087AGG-P be used as a direct replacement for MP5087AGG-Z?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, pin configuration, and package dimensions. The only difference is the packaging format (Cut Tape vs. Digi-Reel).

Q: Are there any differences in performance between MP5087AGG-Z and MP5087AGG-P?

A: No. Both parts have identical electrical characteristics including 7A output current, 10mOhm on-resistance, voltage ratings, protection features, and operating temperature range.

Q: What is the difference between Cut Tape and Digi-Reel packaging?

A: Cut Tape (MP5087AGG-Z) is supplied on tape cut to specific lengths, suitable for lower-volume applications. Digi-Reel (MP5087AGG-P) is supplied on full reels, suitable for high-volume production. Both formats contain the same component.

Q: Do both parts require the same PCB footprint?

A: Yes. Both MP5087AGG-Z and MP5087AGG-P use the 12-VFQFN (2x2) package with identical pin assignments and footprint requirements.

Q: Are both parts compliant with environmental regulations?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental standards for electronic components.

Q: What protection features are included in both parts?

A: Both parts include adjustable current limiting, over-temperature protection, and under-voltage lockout (UVLO) to protect against fault conditions.