MP5013AGJ-Z Equivalent & Substitute Parts

Part Overview

The MP5013AGJ-Z is an active power switch IC designed for general-purpose load switching applications. This N-channel power switch operates in a 1:1 configuration with high-side output topology, delivering up to 5A continuous output current. The device integrates comprehensive fault protection including current limiting, over-temperature, over-voltage, and UVLO monitoring. The MP5013AGJ-Z is currently in active production status with 59,200 units in stock. Substitute parts are identified when packaging or supply chain requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

MP5013AGJ-Z

Monolithic Power Systems Inc.In Stock: 59282MP5013AGJ-Z Datasheet

Current PartRFQ

MP5013AGJ-P

Monolithic Power Systems Inc.In Stock: 1832MP5013AGJ-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP5013AGJ-Z has one parametric equivalent identified based on strict electrical and mechanical compatibility criteria. Substitution eligibility is determined by the following parameters:

• Output current rating: 5A maximum
• Load voltage range: 3V ~ 5.5V
• Output topology: High-side N-channel 1:1 configuration
• On-resistance: 36mOhm typical
• Fault protection suite: Current limiting, over-temperature, over-voltage, UVLO
• Package type: TSOT-23-8 (SOT-23-8 Thin)
• Operating temperature range: -40°C ~ 125°C
• Mounting: Surface mount

The identified substitute differs only in packaging format (Cut Tape versus Tape & Reel), which does not affect electrical performance or mechanical compatibility in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both the MP5013AGJ-Z and MP5013AGJ-P are active production devices from Monolithic Power Systems Inc. with identical electrical specifications and mechanical compatibility. Selection between these parts is determined by packaging and supply requirements rather than technical performance.

The MP5013AGJ-Z in Tape & Reel format is suitable for high-volume automated assembly operations. The MP5013AGJ-P in Cut Tape format accommodates lower-volume production runs or manual assembly workflows. Both variants maintain ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status, ensuring regulatory compatibility across applications.

Frequently Asked Questions (FAQ)

Q: Can MP5013AGJ-P be used as a direct replacement for MP5013AGJ-Z?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: MP5013AGJ-Z is supplied in Tape & Reel, while MP5013AGJ-P is supplied in Cut Tape. This distinction affects handling and assembly processes but not circuit performance or pin compatibility.

Q: What determines substitution eligibility for the MP5013AGJ-Z?

A: Substitutes must maintain identical specifications across: output current (5A), load voltage range (3V ~ 5.5V), on-resistance (36mOhm), output topology (high-side N-channel 1:1), fault protection features, operating temperature range (-40°C ~ 125°C), and TSOT-23-8 package type.

Q: Are there differences in thermal or electrical performance between these parts?

A: No. Both parts share identical thermal characteristics, on-resistance, current ratings, and fault protection thresholds. Performance in the application circuit is equivalent.

Q: Which packaging format should be selected for my application?

A: Tape & Reel (MP5013AGJ-Z) is standard for automated pick-and-place assembly at production volumes. Cut Tape (MP5013AGJ-P) is used for lower-volume builds, prototyping, or manual assembly. Select based on your manufacturing process requirements, not electrical performance.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both MP5013AGJ-Z and MP5013AGJ-P are ROHS3 compliant and REACH unaffected, meeting regulatory requirements for industrial and consumer applications.