MP5010-BP Bridge Rectifier Equivalent & Substitute Parts

Part Overview

The MP5010-BP is a single-phase bridge rectifier manufactured by Micro Commercial Co, rated for 1 kV peak reverse voltage and 50 A average rectified current. This component is designed for standard rectification applications requiring QC terminal mounting. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across the specified parameter range.

Substiute Parts

MP5010-BP

Micro Commercial CoIn Stock: 1150MP5010-BP Datasheet

Current PartRFQ

BR5010-G

Comchip TechnologyIn Stock: 1172BR5010-G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MP5010-BP is determined by the following critical parameters:

• Single-phase bridge rectifier topology with standard technology
• Peak reverse voltage rating of 1 kV minimum
• Average rectified current rating of 50 A minimum
• QC terminal mounting compatibility
• 4-Square package form factor
• Forward voltage characteristics within acceptable operating range
• Reverse leakage current specifications
• Operating temperature range compatibility
• Active product status with current manufacturing support
• RoHS3 and REACH compliance certification

The BR5010-G from Comchip Technology meets these substitution criteria across all critical electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the MP5010-BP and BR5010-G are active production components with identical RoHS3 and REACH compliance certifications. Selection between these parts should be based on:

• Availability and lead time requirements
• Forward voltage performance characteristics (BR5010-G exhibits lower forward voltage at 1.1 V versus 1.2 V)
• Packaging preference (MP-50 versus BR terminal configuration)
• Supplier inventory and procurement channels
• Operating temperature range requirements (MP5010-BP: -50 to 150°C; BR5010-G: -55 to 125°C)

Both components satisfy the core electrical and mechanical requirements for single-phase bridge rectification at 1 kV and 50 A ratings with QC terminal mounting.

Frequently Asked Questions (FAQ)

Q: Can BR5010-G directly replace MP5010-BP in existing designs?

A: Yes, the BR5010-G meets all critical electrical parameters (1 kV peak reverse voltage, 50 A average rectified current) and mounting requirements (QC terminal, 4-Square package). Both components are RoHS3 compliant and have unlimited moisture sensitivity ratings.

Q: What is the difference in forward voltage between these parts?

A: The BR5010-G has a maximum forward voltage of 1.1 V at 25 A, compared to 1.2 V for the MP5010-BP. This represents a 0.1 V improvement in the BR5010-G, which may reduce power dissipation in applications with sustained current flow.

Q: Are there operating temperature range differences?

A: Yes. The MP5010-BP operates from -50 to 150°C (TJ), while the BR5010-G operates from -55 to 125°C (TJ). The MP5010-BP provides a higher maximum temperature rating. Application requirements should determine which range is appropriate.

Q: Do these parts use the same package?

A: Both use 4-Square package form factors with QC terminal mounting. The MP-50 and BR designations refer to the specific terminal configurations from each manufacturer, but both are mechanically compatible with standard QC terminal footprints.

Q: Are both parts currently available?

A: Yes. The MP5010-BP has 1099 pieces in stock, and the BR5010-G has 1137 pieces in stock as new original inventory.

Q: What compliance certifications apply to both parts?

A: Both the MP5010-BP and BR5010-G are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8541.10.0080.