MP4050GJ-P LED Driver IC Equivalent & Substitute Parts

Part Overview

The MP4050GJ-P is an AC DC offline switcher LED driver IC manufactured by Monolithic Power Systems Inc., designed for lighting applications with a single output topology using step-down (buck) conversion. The device features an internal switch and operates across a wide AC input range of 85VAC to 265VAC, housed in a compact TSOT-23-5 surface mount package.

The MP4050GJ-P carries a "Not For New Designs" product status, indicating it is no longer recommended for new development. This status necessitates identification of functionally equivalent alternatives that maintain compatibility with existing circuit requirements while offering active or current product lifecycle support.

Key Parameters

Parameter	MP4050GJ-P
Manufacturer	Monolithic Power Systems Inc.
Category	Power Management (PMIC)
Type	AC DC Offline Switcher
Topology	Step-Down (Buck)
Internal Switch(s)	Yes
Number of Outputs	1
Voltage - Supply (Min)	85VAC
Voltage - Supply (Max)	265VAC
Applications	Lighting
Operating Temperature	-40°C ~ 125°C (TJ)
Package / Case	SOT-23-5 Thin, TSOT-23-5
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Product Status	Not For New Designs

Substitute Part Grouping Explanation

Substitution eligibility for the MP4050GJ-P is determined by the following critical parameters:

Type: AC DC Offline Switcher topology
Application: Lighting
Internal Switch Requirement: Presence of integrated power switch
Number of Outputs: Single output configuration
Supply Voltage Range: AC input capability within or overlapping 85VAC–265VAC
Operating Temperature Range: Minimum -40°C to maximum 125°C
RoHS Compliance: ROHS3 Compliant status
Mounting Type: Surface mount technology

The substitute parts identified below satisfy these core electrical and mechanical criteria. Variations in package type, frequency range, dimming methodology, and specific voltage ratings reflect design trade-offs within the AC DC offline switcher category for lighting applications.

Parameter Comparison

Parameter	MP4050GJ-P	LYT1403D-TL	NCL30001DR2G	LM3445MMX/NOPB	LM3450AMT/NOPB	BD555A1AFV-E2
Manufacturer	Monolithic Power Systems Inc.	Power Integrations	onsemi	Texas Instruments	Texas Instruments	ROHM Semiconductor
Type	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher	AC DC Offline Switcher
Topology	Step-Down (Buck)	Step-Down (Buck)	Flyback, Step-Down (Buck)	Step-Down (Buck)	Flyback, Step-Up (Boost)	Step-Down (Buck)
Internal Switch(s)	Yes	Yes	No	No	Yes	No
Number of Outputs	1	1	1	1	1	1
Voltage - Supply (Min)	85VAC	90VAC	—	8V	8.5V	10V
Voltage - Supply (Max)	265VAC	308VAC	—	12V	20V	38V
Applications	Lighting	Lighting	Lighting	Lighting	—	—
Operating Temperature	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)	-40°C ~ 125°C (TJ)	-40°C ~ 100°C (TA)
Package / Case	SOT-23-5 Thin, TSOT-23-5	8-SO	16-SOIC (0.154", 3.90mm Width)	10-TFSOP, 10-MSOP (0.118", 3.00mm Width)	16-TSSOP (0.173", 4.40mm Width)	14-LSSOP (0.173", 4.40mm Width)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Not For New Designs	Active	Active	Active	Active	Obsolete

Engineering Selection Recommendations

LYT1403D-TL (Power Integrations) represents the closest functional equivalent to the MP4050GJ-P. Both devices operate as AC DC offline switchers with step-down topology, integrated internal switches, and single output configurations. The LYT1403D-TL maintains AC input voltage compatibility (90VAC–308VAC) and identical operating temperature range (-40°C to 125°C). The device carries Active product status with RoHS compliance, making it suitable for new designs. Package differences (8-SO versus TSOT-23-5) require PCB layout modification.

NCL30001DR2G (onsemi) provides an alternative AC DC offline switcher topology combining flyback and step-down configurations. Operating temperature range and RoHS compliance align with the MP4050GJ-P. The absence of an internal switch and larger 16-SOIC package represent design trade-offs. Active product status supports long-term availability.

LM3445MMX/NOPB (Texas Instruments) operates as an AC DC offline switcher with step-down topology and no internal switch. The device is limited to lower DC supply voltages (8V–12V) compared to the MP4050GJ-P's AC input range, restricting direct substitution in AC-powered circuits. Active product status and RoHS compliance are maintained. Suitable only for DC-powered lighting applications.

LM3450AMT/NOPB (Texas Instruments) combines flyback and step-up (boost) topologies with an integrated internal switch. Operating temperature range and RoHS compliance match the MP4050GJ-P. The boost topology and higher output voltage (11.5V) indicate application-specific design differences. Active product status ensures availability.

BD555A1AFV-E2 (ROHM Semiconductor) is classified as Obsolete, limiting its suitability for new designs despite functional similarities as an AC DC offline switcher with step-down topology. The reduced operating temperature maximum (100°C versus 125°C) and absence of internal switch present additional constraints.

Frequently Asked Questions (FAQ)

Q: Can the LYT1403D-TL directly replace the MP4050GJ-P without circuit modifications?

A: The LYT1403D-TL maintains electrical compatibility as an AC DC offline switcher with integrated switch and single output. However, the package change from TSOT-23-5 to 8-SO requires PCB layout redesign. Pin configuration and signal routing must be verified against device datasheets before implementation.

Q: Why is the BD555A1AFV-E2 listed as a substitute if it is Obsolete?

A: The BD555A1AFV-E2 is included because it was explicitly identified in the MP4050GJ-P substitute list. However, its Obsolete status and reduced maximum operating temperature (100°C) make it unsuitable for new designs. Active alternatives such as LYT1403D-TL or NCL30001DR2G are preferred.

Q: What is the significance of the internal switch parameter in substitution?

A: The internal switch determines whether the IC integrates power switching functionality or requires external switching components. The MP4050GJ-P includes an internal switch, reducing external component count. Substitutes without internal switches (LM3445MMX/NOPB, BD555A1AFV-E2, NCL30001DR2G) require additional external switching circuitry, affecting board area and cost.

Q: Are the LM3445MMX/NOPB and LM3450AMT/NOPB suitable for AC mains-powered lighting applications?

A: The LM3445MMX/NOPB operates on DC supply voltages (8V–12V) and is not designed for direct AC mains input. The LM3450AMT/NOPB accepts DC supply voltages (8.5V–20V). Both devices require a separate AC-to-DC conversion stage before the LED driver IC, making them unsuitable as direct replacements in AC-powered circuits.

Q: How do package differences affect circuit design when substituting parts?

A: Package changes require PCB layout redesign, including trace routing, component placement, and thermal management considerations. The MP4050GJ-P uses TSOT-23-5 (5-pin thin package), while alternatives range from 8-SO to 16-SOIC or 16-TSSOP packages. Larger packages may offer improved thermal performance but require additional board space. Pin-to-pin compatibility must be verified independently.

Q: What compliance certifications are maintained across all substitute parts?

A: All substitute parts maintain RoHS3 compliance (or RoHS compliance for LYT1403D-TL) and REACH Unaffected status, consistent with the MP4050GJ-P. ECCN classification (EAR99) and HTSUS codes (8542.39.0001) are uniform across all listed devices, indicating equivalent regulatory treatment for export and tariff purposes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message