MP4012DS-LF-Z LED Driver Controller - Equivalent & Substitute Parts

Part Overview

The MP4012DS-LF-Z is a LED Driver IC manufactured by Monolithic Power Systems Inc., classified as a Power Management PMIC. This device functions as a 1-output DC DC controller supporting SEPIC, Step-Down (Buck), and Step-Up (Boost) topologies with analog and PWM dimming capabilities. The part is designated as "Not For New Designs," indicating it has reached end-of-life status. Finding equivalent and substitute parts is necessary to maintain design flexibility, ensure supply chain continuity, and support ongoing production requirements for applications in backlight and lighting systems.

Key Parameters

Parameter	Value
Manufacturer Part Number	MP4012DS-LF-Z
Manufacturer	Monolithic Power Systems Inc.
Category	Power Management (PMIC)
Type	DC DC Controller
Topology	SEPIC, Step-Down (Buck), Step-Up (Boost)
Number of Outputs	1
Voltage - Supply (Min)	8V
Voltage - Supply (Max)	55V
Frequency	580kHz
Dimming	Analog, PWM
Applications	Backlight, Lighting
Operating Temperature	-40°C ~ 85°C (TA)
Grade	Automotive
Package / Case	16-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Product Status	Not For New Designs

Substitute Part Grouping Explanation

Substitution eligibility for the MP4012DS-LF-Z is determined by the following critical parameters:

Primary Substitution Criteria:

Topology support: SEPIC, Step-Down (Buck), and Step-Up (Boost) capability
Supply voltage range: Minimum 8V to maximum 55V overlap
Dimming capability: Analog and PWM support
Number of outputs: Single output configuration
Package compatibility: 16-SOIC form factor preferred for direct PCB replacement
Automotive grade qualification for reliability in target applications

Secondary Compatibility Factors:

Operating temperature range: -40°C minimum and 85°C maximum or better
Frequency operation: 580kHz nominal or compatible switching frequency range
RoHS3 compliance and REACH unaffected status for regulatory alignment

Substitute parts are grouped into two categories: direct replacements with identical or superior electrical specifications and package compatibility, and functional equivalents that meet topology and voltage requirements but may require PCB layout modifications due to different package types.

Parameter Comparison

Parameter	MP4012DS-LF-Z	MP4013BGS-Z	ALED6001TR	AP3041MTR-G1	AT9933LG-G	HV9910CNG-G	HV9912NG-G	LT3796HFE-1#TRPBF	LT3796IFE-1#PBF	MAX16834ATP+T	TPS92692PWPR
Manufacturer	MPS	MPS	STMicroelectronics	Diodes Inc.	Microchip	Microchip	Microchip	Analog Devices	Analog Devices	Analog Devices/Maxim	Texas Instruments
Type	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller	DC DC Controller
Topology	SEPIC, Buck, Boost	SEPIC, Boost	SEPIC, Buck, Boost	Boost	Buck, Boost	Buck	SEPIC, Buck, Boost	SEPIC, Buck, Boost	SEPIC, Buck, Boost	SEPIC, Buck, Boost	Buck, Boost
Voltage - Supply (Min)	8V	8V	5.5V	5V	—	15V	9V	6V	6V	4.75V	4.5V
Voltage - Supply (Max)	55V	26V	36V	27V	75V	450V	100V	100V	100V	28V	65V
Frequency	580kHz	600kHz	1MHz	100kHz ~ 1MHz	—	25kHz, 100kHz	106kHz, 580kHz	100kHz ~ 1MHz	100kHz ~ 1MHz	100kHz ~ 1MHz	80kHz ~ 800kHz
Dimming	Analog, PWM	Analog, PWM	Analog, PWM	PWM	PWM	Analog, PWM	Analog, PWM	Analog, PWM	Analog, PWM	Analog, PWM	Analog, PWM
Number of Outputs	1	1	1	1	1	1	1	1	1	1	1
Operating Temperature (Min)	-40°C	—	-40°C	-40°C	-40°C	-40°C	-40°C	-40°C	-40°C	-40°C	-40°C
Operating Temperature (Max)	85°C	—	150°C	85°C	125°C	125°C	125°C	150°C	125°C	125°C	125°C
Grade	Automotive	Automotive	Automotive	—	Automotive	—	—	—	—	Automotive	—
Package / Case	16-SOIC	16-SOIC	16-HTSSOP	16-SOIC	8-SOIC	16-SOIC	16-SOIC	28-TSSOP-EP	28-TSSOP-EP	20-TQFN	20-HTSSOP
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Not For New Designs	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Tier 1 - Direct Package Replacement (16-SOIC):

MP4013BGS-Z (Monolithic Power Systems Inc.) provides the closest functional match with identical 16-SOIC packaging. This part maintains SEPIC and Boost topology support with Analog and PWM dimming. However, the maximum supply voltage is limited to 26V compared to the MP4012DS-LF-Z's 55V, restricting its use to lower voltage applications. The part is currently Active and Automotive-qualified, making it suitable for direct PCB substitution in compatible voltage domains.

HV9912NG-G (Microchip Technology) offers full topology compatibility (SEPIC, Buck, Boost) in 16-SOIC packaging with extended supply voltage range (9V to 100V) and Automotive AEC-Q100 qualification. Operating temperature extends to 125°C, exceeding the original part's 85°C maximum. This part is Active and represents a robust alternative for designs requiring higher voltage operation.

AP3041MTR-G1 (Diodes Incorporated) provides 16-SOIC packaging with Boost topology and PWM dimming. Supply voltage range is 5V to 27V with 1A output current specification. This part is Active but lacks Analog dimming capability and SEPIC topology support, limiting its application scope.

Tier 2 - Alternative Package Formats:

ALED6001TR (STMicroelectronics) delivers full topology support (SEPIC, Buck, Boost) in 16-HTSSOP packaging with supply voltage range 5.5V to 36V. The part features 1MHz switching frequency and Automotive AEC-Q100 qualification with extended operating temperature to 150°C. PCB layout modification is required due to different package footprint.

LT3796HFE-1#TRPBF and LT3796IFE-1#PBF (Analog Devices Inc.) both support complete topology requirements in 28-TSSOP-EP packaging with 6V to 100V supply range and 100kHz to 1MHz frequency operation. These parts are Active with extended temperature ratings to 150°C and 125°C respectively. Significant PCB redesign is necessary due to package change.

MAX16834ATP+T (Analog Devices Inc./Maxim Integrated) provides SEPIC, Buck, and Boost topologies in 20-TQFN packaging with Automotive qualification. Supply voltage range is 4.75V to 28V with 27V output specification. This part requires PCB layout modification and is suitable for space-constrained applications.

TPS92692PWPR (Texas Instruments) supports Buck and Boost topologies in 20-HTSSOP packaging with 4.5V to 65V supply range and 80kHz to 800kHz frequency operation. The part is Active but lacks SEPIC topology and Analog dimming, limiting functional equivalence.

Tier 3 - Limited Topology Support:

AT9933LG-G (Microchip Technology) provides Buck and Boost topologies in 8-SOIC packaging with extended supply voltage to 75V and Automotive AEC-Q100 qualification. SEPIC topology is not supported, and operating temperature range is not specified. This part is suitable only for applications not requiring SEPIC operation.

HV9910CNG-G (Microchip Technology) supports only Step-Down (Buck) topology in 16-SOIC packaging with extremely high supply voltage range (15V to 450V). This part is restricted to buck-only applications and is not suitable as a general replacement.

Frequently Asked Questions (FAQ)

Q: Can MP4013BGS-Z directly replace MP4012DS-LF-Z in all applications?

A: MP4013BGS-Z provides direct 16-SOIC package compatibility and maintains SEPIC and Boost topologies with Analog and PWM dimming. However, the maximum supply voltage is limited to 26V versus the original part's 55V. Direct substitution is valid only for applications operating within the 8V to 26V supply range. Applications requiring higher voltage operation must select alternative parts such as HV9912NG-G or LT3796 series devices.

Q: What is the primary advantage of HV9912NG-G over MP4013BGS-Z?

A: HV9912NG-G extends the maximum supply voltage to 100V while maintaining identical 16-SOIC packaging and full topology support (SEPIC, Buck, Boost). Operating temperature extends to 125°C, and the part carries Automotive AEC-Q100 qualification. This makes HV9912NG-G suitable for higher voltage applications where MP4013BGS-Z cannot operate.

Q: Why do LT3796 series parts require PCB redesign?

A: LT3796HFE-1#TRPBF and LT3796IFE-1#PBF use 28-TSSOP-EP packaging, which differs significantly from the original 16-SOIC form factor. The pin count increases from 16 to 28, and the physical footprint dimensions change. PCB layout modification is necessary to accommodate the new package geometry, trace routing, and thermal management requirements.

Q: Which substitute parts maintain Automotive qualification?

A: MP4013BGS-Z, ALED6001TR, AT9933LG-G, and MAX16834ATP+T carry explicit Automotive grade designation. HV9912NG-G holds Automotive AEC-Q100 qualification. These parts are recommended for applications requiring automotive-grade reliability and compliance.

Q: Can parts with PWM-only dimming replace the MP4012DS-LF-Z?

A: Parts supporting only PWM dimming (AP3041MTR-G1, AT9933LG-G, HV9910CNG-G) cannot fully replace the MP4012DS-LF-Z, which supports both Analog and PWM dimming. If the application design requires Analog dimming capability, these parts are not suitable substitutes. Verify dimming requirements before selection.

Q: What is the impact of frequency differences between substitute parts?

A: The MP4012DS-LF-Z operates at 580kHz. Substitute parts operate at frequencies ranging from 25kHz to 1MHz. Frequency differences affect output filter design, EMI characteristics, and component selection. Parts with significantly different frequencies (such as HV9910CNG-G at 25kHz or 100kHz) may require output filter redesign to maintain performance specifications.

Q: Is ALED6001TR suitable for direct PCB replacement?

A: ALED6001TR uses 16-HTSSOP packaging instead of 16-SOIC. While both are 16-pin packages, the physical dimensions and pin pitch differ. Direct PCB replacement is not possible without footprint modification. However, the electrical specifications are highly compatible, making it a viable alternative with PCB layout changes.

Q: What supply voltage range is common across all substitute parts?

A: No single voltage range encompasses all substitute parts. The overlapping range for parts supporting SEPIC, Buck, and Boost topologies with Analog and PWM dimming is 8V to 28V (limited by MAX16834ATP+T's maximum). For applications requiring operation above 28V, HV9912NG-G (9V to 100V) or LT3796 series (6V to 100V) are necessary.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all listed substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory status of the MP4012DS-LF-Z.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message