Request Quote
(Ships tomorrow)
MP3331GC-Z LED Driver IC Equivalent & Substitute Parts
Part Overview
The MP3331GC-Z is a LED Driver IC manufactured by Monolithic Power Systems Inc., designed for step-up (boost) DC-DC regulation with PWM dimming control. This device integrates a 2A output driver optimized for camera flash applications, operating across a 2.7V to 5.5V supply range in a compact 9-WLCSP package.
The MP3331GC-Z carries a "Not For New Designs" product status, indicating it is no longer recommended for new development. This necessitates identification of functionally equivalent alternatives that maintain compatibility with existing design requirements while offering active product status and continued manufacturer support.
Substiute Parts
Key Parameters
| Parameter | MP3331GC-Z |
|---|---|
| Manufacturer | Monolithic Power Systems Inc. |
| Category | Power Management (PMIC) |
| Type | DC DC Regulator |
| Topology | Step-Up (Boost) |
| Voltage Supply Range | 2.7V – 5.5V |
| Output Current | 2A |
| Switching Frequency | 4MHz |
| Dimming Control | PWM |
| Primary Application | Camera Flash |
| Operating Temperature | -40°C to 125°C (TJ) |
| Package Type | 9-WLCSP (1.7x1.7) |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity | MSL 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the MP3331GC-Z is determined by the following critical parameters:
- Topology: Step-Up (Boost) DC-DC regulation with internal switching capability
- Supply Voltage Compatibility: Minimum 2.7V input support; maximum input ≥5.5V
- Output Current Capability: Minimum 2A for primary camera flash application
- Dimming Control Method: PWM dimming support
- Package Form Factor: Surface mount technology with comparable footprint constraints
- Compliance: ROHS3 compliance and MSL rating ≤3 for manufacturing compatibility
- Product Status: Active or equivalent lifecycle status
Substitute parts are grouped into two categories based on functional alignment:
Category A – Direct Functional Equivalents (Camera Flash Optimized): Parts meeting or exceeding the 2A output current requirement with PWM dimming and camera flash application support.
Category B – Functional Alternatives (Reduced Current / Alternative Applications): Parts with lower output current ratings or alternative dimming methods, suitable for backlight or lower-power flash implementations where 2A output is not mandatory.
Parameter Comparison
| Part Number | Manufacturer | Topology | Supply Voltage (Min-Max) | Output Current | Dimming Method | Frequency | Package | Product Status | Operating Temp |
|---|---|---|---|---|---|---|---|---|---|
| MP3331GC-Z | Monolithic Power Systems | Step-Up (Boost) | 2.7V – 5.5V | 2A | PWM | 4MHz | 9-WLCSP (1.7x1.7) | Not For New Designs | -40°C to 125°C (TJ) |
| ADP1650ACBZ-R7 | Analog Devices Inc. | Step-Up (Boost) | 2.7V – 5V | 1.5A (Flash) | I2C | 1.5MHz, 3MHz | 12-WLCSP (1.5x2) | Active | -40°C to 85°C (TA) |
| AP5725WG-7 | Diodes Incorporated | Step-Up (Boost) | 2.7V – 5.5V | 750mA (Switch) | PWM | 1.2MHz | SOT-26 | Active | -40°C to 85°C (TA) |
| AP5726WG-7 | Diodes Incorporated | Step-Up (Boost) | 2.7V – 5.5V | 750mA (Switch) | PWM | 1.2MHz | SOT-26 | Active | -40°C to 85°C (TA) |
| BD60910GU-E2 | ROHM Semiconductor | Step-Up (Boost) | 2.7V – 5.5V | 25.6mA | PWM | 1MHz | VCSP85H3 | Not For New Designs | -40°C to 85°C (TA) |
| LM3530UMX-25A/NOPB | Texas Instruments | Step-Up (Boost) | 2.7V – 5.5V | 30mA | PWM | 500kHz | 12-DSBGA | Active | -40°C to 85°C (TA) |
| LM3553SD/NOPB | Texas Instruments | Step-Up (Boost) | 2.7V – 5.5V | 1.2A (Flash) | I2C | 1.2MHz | 12-WSON (3x3) | Active | -30°C to 85°C (TA) |
| LT1937ES5#TRMPBF | Analog Devices Inc. | Step-Up (Boost) | 2.5V – 10V | 320mA (Switch) | Analog, PWM | 1.2MHz | TSOT-23-5 | Active | -40°C to 85°C (TA) |
| LT1937ESC6#TRMPBF | Analog Devices Inc. | Step-Up (Boost) | 2.5V – 10V | 320mA (Switch) | Analog, PWM | 1.2MHz | SC-70-6 | Active | -40°C to 85°C (TA) |
| LT3491EDC#TRMPBF | Analog Devices Inc. | Step-Up (Boost) | 2.5V – 12V | 260mA (Switch) | PWM | 2.3MHz | 6-DFN (2x2) | Active | -40°C to 85°C (TA) |
| LT3491ESC8#TRMPBF | Analog Devices Inc. | Step-Up (Boost) | 2.5V – 12V | 350mA (Switch) | PWM | 2.3MHz | SC-70-8 | Active | -40°C to 85°C (TA) |
Engineering Selection Recommendations
For Direct Replacement (Camera Flash, 2A Output Requirement)
The ADP1650ACBZ-R7 provides the closest functional alignment to the MP3331GC-Z in terms of output current capability (1.5A flash mode) and active product status. However, this part employs I2C dimming control rather than PWM, requiring firmware or control circuit modification. The supply voltage range is slightly reduced (2.7V–5V vs. 2.7V–5.5V). This part is suitable for designs where I2C control integration is feasible.
The LM3553SD/NOPB offers 1.2A flash output with I2C dimming, active status, and full supply voltage compatibility (2.7V–5.5V). This represents a viable alternative where I2C control is acceptable and output current requirements can be met at 1.2A.
For Reduced Current Applications (Backlight, Lower Power Flash)
The LT3491ESC8#TRMPBF provides 350mA output with PWM dimming (matching the MP3331GC-Z control method), active product status, and extended supply voltage range (2.5V–12V). This is suitable for backlight applications or lower-power flash implementations.
The LT1937ES5#TRMPBF and LT1937ESC6#TRMPBF both offer 320mA output with dual Analog/PWM dimming capability, active status, and extended supply voltage support. These are appropriate for backlight-focused designs.
Compliance Considerations
All recommended active substitutes maintain ROHS3 compliance and MSL ratings ≤3, ensuring manufacturing process compatibility. The MP3331GC-Z operates at junction temperature up to 125°C; substitute parts operate at ambient temperature up to 85°C. Thermal design review is required for applications approaching the upper temperature limit.
Frequently Asked Questions (FAQ)
Q: Can the ADP1650ACBZ-R7 directly replace the MP3331GC-Z in a camera flash circuit?
A: The ADP1650ACBZ-R7 is functionally compatible in topology and output current capability (1.5A vs. 2A). However, it uses I2C dimming control instead of PWM. Direct replacement requires modification of the dimming control circuit and firmware. The supply voltage range is also slightly reduced (5V maximum vs. 5.5V).
Q: Why do some substitute parts have significantly lower output current ratings?
A: The MP3331GC-Z is optimized for camera flash applications requiring 2A output. Substitute parts like the LM3530UMX-25A/NOPB (30mA) and BD60910GU-E2 (25.6mA) are designed for backlight applications with different current requirements. These are not suitable for camera flash replacement but may serve alternative applications.
Q: What is the impact of switching frequency differences between the MP3331GC-Z (4MHz) and substitute parts?
A: The MP3331GC-Z operates at 4MHz, while most substitutes operate at 1MHz–2.3MHz. Lower switching frequency reduces EMI performance but may improve efficiency in certain load conditions. Higher frequency enables smaller inductor and capacitor components. Frequency selection depends on PCB layout constraints and EMI requirements.
Q: Are all substitute parts ROHS3 compliant?
A: Yes. All listed substitute parts maintain ROHS3 compliance, ensuring compatibility with current manufacturing and environmental regulations.
Q: What is the significance of MSL (Moisture Sensitivity Level) ratings?
A: The MP3331GC-Z carries MSL 1 (unlimited shelf life). Most substitutes also carry MSL 1 or MSL 3 (168 hours). MSL 3 parts require controlled storage conditions and have a 168-hour floor life after moisture exposure. This affects supply chain handling and manufacturing scheduling.
Q: Can I use the LT3491ESC8#TRMPBF as a drop-in replacement for the MP3331GC-Z?
A: No. The LT3491ESC8#TRMPBF has 350mA output (vs. 2A) and uses SC-70-8 packaging (vs. 9-WLCSP). It is suitable for backlight applications but not for camera flash requiring 2A output. PCB layout and control circuit modifications are required.
Q: Why is the MP3331GC-Z marked "Not For New Designs"?
A: This status indicates the manufacturer has discontinued active development and support. Existing inventory remains available, but new designs should transition to active alternatives. The ADP1650ACBZ-R7 and LM3553SD/NOPB are recommended active alternatives.
Q: What is the operating temperature difference between the MP3331GC-Z and substitute parts?
A: The MP3331GC-Z operates to 125°C junction temperature (TJ). Most substitutes operate to 85°C ambient temperature (TA). For high-temperature applications, thermal analysis is required to confirm substitute part suitability.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts