MP2625BGL-P Equivalent & Substitute Parts

Part Overview

The MP2625BGL-P is a lithium-ion battery charger IC manufactured by Monolithic Power Systems Inc., designed for single-cell battery charging applications. This active product operates as a power management integrated circuit (PMIC) in a 20-QFN surface mount package. The device supports programmable charging current and timer functions with integrated over-temperature fault protection. Substitute parts are identified when identical electrical specifications and mechanical compatibility are maintained across different packaging formats or inventory sources.

Substiute Parts

MP2625BGL-P

Monolithic Power Systems Inc.In Stock: 1242MP2625BGL-P Datasheet

Current PartRFQ

MP2625BGL-Z

Monolithic Power Systems Inc.In Stock: 105474MP2625BGL-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MP2625BGL-P is determined by strict equivalence across the following critical parameters:

• Battery chemistry and cell count (Lithium Ion, 1 cell)
• Maximum charging current (2A)
• Battery pack voltage (4.2V)
• Maximum supply voltage (10V)
• Interface type (USB)
• Operating temperature range (-40°C ~ 125°C)
• Package type (20-PowerTFQFN)
• Mounting technology (Surface Mount)
• Regulatory compliance (ROHS3, REACH Unaffected)

The MP2625BGL-Z qualifies as a parametric equivalent because it maintains identical electrical specifications and mechanical compatibility. The only difference is the packaging format (Cut Tape & Digi-Reel® versus Tape & Reel), which does not affect functional performance or circuit integration.

Parameter Comparison

Engineering Selection Recommendations

Both MP2625BGL-P and MP2625BGL-Z are active products from Monolithic Power Systems Inc. with identical electrical and mechanical specifications. Selection between these parts should be based on:

• Packaging format requirements: MP2625BGL-P is supplied in Tape & Reel format; MP2625BGL-Z is supplied in Cut Tape and Digi-Reel® format
• Inventory availability and lead time considerations
• Assembly process compatibility with the supplied packaging format
• Both parts maintain ROHS3 compliance and REACH unaffected status
• Both parts carry MSL 1 rating, indicating no moisture sensitivity restrictions

Frequently Asked Questions (FAQ)

Q: Can MP2625BGL-Z be used as a direct replacement for MP2625BGL-P in production?

A: Yes. The parts are electrically and mechanically identical. The only difference is the packaging format (tape reel type). If your assembly equipment can process Cut Tape or Digi-Reel® format, MP2625BGL-Z is a direct functional substitute.

Q: What determines if a part is a valid substitute for the MP2625BGL-P?

A: A valid substitute must maintain identical specifications across battery chemistry, cell count, maximum charging current (2A), battery voltage (4.2V), supply voltage (10V), interface type (USB), operating temperature range (-40°C to 125°C), package type (20-PowerTFQFN), and regulatory compliance status.

Q: Does the packaging format affect circuit performance?

A: No. Tape & Reel and Cut Tape & Digi-Reel® are supply formats only. The die, electrical characteristics, and performance of MP2625BGL-P and MP2625BGL-Z are identical.

Q: Are there any compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical MSL 1 ratings.

Q: What is the base product number for these parts?

A: The base product number is MP2625. Both MP2625BGL-P and MP2625BGL-Z are variants of this base product with identical core functionality.