MP2015AGQ-33-Z Linear Voltage Regulator

Part Overview

The MP2015AGQ-33-Z is an active linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This device provides a fixed 3.3V positive output with 150mA current capacity in an 8-QFN (3x3) surface mount package. The part is currently in active production status with 814 units available in new original inventory. Equivalent substitute parts may be required due to supply chain constraints, procurement lead times, or specific packaging preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

MP2015AGQ-33-Z

Monolithic Power Systems Inc.In Stock: 902MP2015AGQ-33-Z Datasheet

Current PartRFQ

MP2015AGQ-33-P

Monolithic Power Systems Inc.In Stock: 672MP2015AGQ-33-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP2015AGQ-33-Z has one parametric equivalent substitute: MP2015AGQ-33-P. Both parts are manufactured by Monolithic Power Systems Inc. and share identical electrical and mechanical specifications. The substitution is valid based on the following key parameters that define functional equivalence:

• Fixed output voltage: 3.3V
• Output current capacity: 150mA
• Input voltage range: up to 24V maximum
• Voltage dropout: 0.7V @ 150mA
• Quiescent current: 15 µA
• PSRR: 55dB (100kHz)
• Operating temperature range: -40°C ~ 125°C (TJ)
• Package type: 8-QFN (3x3) with exposed pad
• Mounting type: Surface Mount
• Control features: Enable function
• RoHS3 compliance and MSL 1 rating

The only difference between these parts is the packaging format: MP2015AGQ-33-Z is supplied in Tape & Reel (TR) format, while MP2015AGQ-33-P is also supplied in Tape & Reel (TR) format. Both maintain identical pinout, electrical performance, and thermal characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both MP2015AGQ-33-Z and MP2015AGQ-33-P are active production parts from Monolithic Power Systems Inc. with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on procurement availability and packaging format requirements. Both parts maintain identical electrical performance, thermal characteristics, and regulatory compliance. The MP2015AGQ-33-Z is currently available with 814 units in stock, while MP2015AGQ-33-P has 659 units available. Either part is suitable for direct substitution in applications requiring a 3.3V fixed output linear regulator with 150mA capacity in an 8-QFN surface mount package.

Frequently Asked Questions (FAQ)

Q: Can MP2015AGQ-33-P be used as a direct replacement for MP2015AGQ-33-Z?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output voltage, current capacity, operating temperature range, and package configuration. They are interchangeable at the circuit level.

Q: Are there any differences in pinout between these two parts?

A: No. Both parts use the same 8-QFN (3x3) package with exposed pad and maintain identical pinout configuration.

Q: What is the difference between MP2015AGQ-33-Z and MP2015AGQ-33-P?

A: Both parts are supplied in Tape & Reel (TR) packaging format. The designations represent different manufacturing batches or procurement channels from Monolithic Power Systems Inc., but they are functionally and electrically identical.

Q: Are both parts RoHS compliant?

A: Yes. Both MP2015AGQ-33-Z and MP2015AGQ-33-P are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the maximum input voltage for these regulators?

A: The maximum input voltage is 24V for both parts.

Q: What output current can these regulators supply?

A: Both parts provide a fixed 150mA output current capacity.

Q: What is the operating temperature range?

A: Both parts operate from -40°C to 125°C junction temperature (TJ).

Q: Are these parts suitable for surface mount assembly?

A: Yes. Both parts are surface mount devices in 8-QFN (3x3) package format with exposed pad for thermal management.