MP2015AGG-Z Equivalent & Substitute Parts

Part Overview

The MP2015AGG-Z is a linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable regulator delivers 150mA output current in a compact 6-QFN (2x2) surface mount package. The device is actively produced and maintains full RoHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Alternative part sourcing becomes necessary due to inventory availability, packaging format requirements, or supply chain optimization across manufacturing facilities.

Substiute Parts

MP2015AGG-Z

Monolithic Power Systems Inc.In Stock: 35470MP2015AGG-Z Datasheet

Current PartRFQ

MP2015AGG-P

Monolithic Power Systems Inc.In Stock: 904MP2015AGG-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP2015AGG-Z and MP2015AGG-P are parametric equivalents within the MP2015 base product family. Substitution eligibility is determined by strict equivalence across the following critical parameters:

• Output voltage range: 1.215V to 15V adjustable
• Output current capacity: 150mA
• Maximum input voltage: 24V
• Dropout voltage: 1.1V @ 150mA
• Quiescent current: 35 µA
• PSRR performance: 55dB (100kHz)
• Operating temperature range: -40°C to 125°C
• Package type: 6-QFN (2x2) with exposed pad
• Regulatory compliance: ROHS3, REACH Unaffected, EAR99

The sole difference between these parts is packaging format: MP2015AGG-Z is supplied in Cut Tape (CT) & Digi-Reel® format, while MP2015AGG-P is supplied in Tape & Reel (TR) format. Both maintain identical electrical performance and physical package specifications.

Parameter Comparison

Engineering Selection Recommendations

Both MP2015AGG-Z and MP2015AGG-P are active production parts with identical electrical specifications and regulatory compliance. Selection between these parts is determined by packaging and supply chain requirements:

• MP2015AGG-Z (Cut Tape & Digi-Reel®): Suitable for lower-volume applications, prototype development, or mixed component sourcing where individual tape formats are preferred.
• MP2015AGG-P (Tape & Reel): Optimized for high-volume manufacturing and automated assembly processes requiring standard reel packaging.

Both parts maintain ROHS3 compliance, REACH Unaffected status, and EAR99 export classification. No electrical or thermal performance differences exist between these variants.

Frequently Asked Questions (FAQ)

Q: Can MP2015AGG-P be used as a direct replacement for MP2015AGG-Z?

A: Yes. Both parts are parametric equivalents with identical electrical performance, thermal characteristics, and package dimensions. The only difference is packaging format (Cut Tape vs. Tape & Reel). No circuit redesign or board layout modification is required.

Q: Are there any compatibility issues when substituting between these parts?

A: No. Both parts use the same 6-QFN (2x2) package with exposed pad, identical pin configuration, and matching electrical specifications. PCB footprints and assembly processes remain unchanged.

Q: What is the difference between Cut Tape (CT) & Digi-Reel® and Tape & Reel (TR) packaging?

A: Cut Tape format provides components on individual tape segments, typically used for lower-volume orders or mixed sourcing. Tape & Reel format supplies components on continuous reels optimized for automated pick-and-place equipment in high-volume manufacturing.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both MP2015AGG-Z and MP2015AGG-P are ROHS3 compliant, REACH Unaffected, and classified as EAR99 for export purposes. Moisture sensitivity level (MSL 1) is identical for both variants.

Q: Is there any performance difference in quiescent current or dropout voltage?

A: No. Both parts deliver identical quiescent current (35 µA), dropout voltage (1.1V @ 150mA), and PSRR performance (55dB @ 100kHz). Electrical behavior is completely equivalent.