MP2015AGG-P Equivalent & Substitute Parts

Part Overview

The MP2015AGG-P is a linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable regulator delivers 150mA output current in a compact 6-QFN (2x2) surface mount package. The device is actively produced and maintains full RoHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Alternative part sourcing becomes necessary due to packaging format differences, supply chain availability, or procurement preferences between tape & reel and cut tape distribution methods.

Substiute Parts

MP2015AGG-P

Monolithic Power Systems Inc.In Stock: 904MP2015AGG-P Datasheet

Current PartRFQ

MP2015AGG-Z

Monolithic Power Systems Inc.In Stock: 35470MP2015AGG-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MP2015AGG-P is determined by strict equivalence across all electrical and mechanical parameters. The primary substitute, MP2015AGG-Z, shares identical specifications with the main part across all critical performance criteria: output configuration, adjustable voltage range (1.215V to 15V), maximum input voltage (24V), output current (150mA), dropout voltage (1.1V @ 150mA), quiescent current (35 µA), PSRR (55dB @ 100kHz), operating temperature range (-40°C to 125°C), and package format (6-VDFN Exposed Pad). The only distinction between these parts is packaging distribution method: MP2015AGG-P is supplied in Tape & Reel (TR) format, while MP2015AGG-Z is supplied in Cut Tape (CT) & Digi-Reel® format. Both parts maintain identical product status (Active), compliance certifications (RoHS3, REACH Unaffected), and moisture sensitivity levels (MSL 1).

Parameter Comparison

Engineering Selection Recommendations

MP2015AGG-Z qualifies as a direct parametric equivalent to MP2015AGG-P. Both parts are manufactured by Monolithic Power Systems Inc., maintain Active product status, and carry identical electrical specifications and compliance certifications. Selection between these parts depends solely on packaging and distribution requirements. MP2015AGG-P in Tape & Reel format is suitable for high-volume automated assembly operations. MP2015AGG-Z in Cut Tape & Digi-Reel® format accommodates lower-volume applications, prototype development, or procurement scenarios where tape & reel packaging is unavailable. Both parts satisfy RoHS3 compliance and REACH requirements with unlimited moisture sensitivity tolerance (MSL 1), ensuring compatibility across standard manufacturing environments and storage conditions.

Frequently Asked Questions (FAQ)

Q: Can MP2015AGG-Z be used as a direct replacement for MP2015AGG-P in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tape & Reel versus Cut Tape & Digi-Reel®). Substitution is valid provided your assembly process accommodates the alternate packaging method.

Q: Are there any performance differences between MP2015AGG-P and MP2015AGG-Z?

A: No. Both parts deliver identical electrical performance: 150mA output current, 1.215V to 15V adjustable output range, 1.1V maximum dropout voltage, 55dB PSRR at 100kHz, and -40°C to 125°C operating temperature range.

Q: Do both parts require the same PCB footprint?

A: Yes. Both parts use the 6-VDFN Exposed Pad package with identical pin configuration and land pattern. No PCB redesign is necessary when substituting between these parts.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) supplies components on continuous carrier tape wound on reels, optimized for high-speed automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® supplies components on shorter tape segments or alternative reel formats, suitable for lower-volume production, prototyping, or manual assembly workflows.

Q: Are both parts RoHS3 compliant?

A: Yes. Both MP2015AGG-P and MP2015AGG-Z are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, meeting environmental and regulatory requirements for standard manufacturing and storage conditions.

Q: Can I mix MP2015AGG-P and MP2015AGG-Z in the same production batch?

A: Yes. Since both parts are parametrically identical with the same electrical specifications and package footprint, they can be used interchangeably within the same assembly process or design.