MP2013GQ-P Equivalent & Substitute Parts

Part Overview

The MP2013GQ-P is a linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable regulator delivers 150mA output current with an adjustable output voltage range from 1.215V to 15V, making it suitable for applications requiring precision voltage regulation in compact form factors. The device is currently in active production status with 808 units available in stock. Alternative part numbers are necessary to address supply chain flexibility, inventory availability, or specific packaging requirements while maintaining identical electrical and mechanical performance.

Substiute Parts

MP2013GQ-P

Monolithic Power Systems Inc.In Stock: 818MP2013GQ-P Datasheet

Current PartRFQ

MP2013GQ-Z

Monolithic Power Systems Inc.In Stock: 19782MP2013GQ-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The MP2013GQ-P has one parametric equivalent substitute: MP2013GQ-Z. Both parts are manufactured by Monolithic Power Systems Inc. and share identical electrical specifications and mechanical characteristics. The substitution is valid based on the following critical parameters that define functional equivalence:

Electrical Performance: Both parts deliver 150mA output current with adjustable voltage output from 1.215V to 15V, maximum input voltage of 40V, and identical dropout voltage of 0.9V @ 150mA.

Quiescent and Supply Current: Both maintain 7.2 µA quiescent current and 50 µA maximum supply current.

Signal Integrity: Both provide identical PSRR performance of 58dB ~ 41dB (100Hz ~ 1kHz).

Protection and Thermal Performance: Both include over current and over temperature protection with operating temperature range of -40°C ~ 125°C (TJ).

Package and Mounting: Both use 8-VDFN Exposed Pad package with 8-QFN (3x3) supplier device package in surface mount configuration.

Compliance and Regulatory: Both are ROHS3 compliant, REACH unaffected, and carry identical MSL rating of 1 (Unlimited).

The only distinction between these parts is the packaging format designation (Tape & Reel for MP2013GQ-P versus unspecified for MP2013GQ-Z), which does not affect electrical or mechanical performance in the application circuit.

Parameter Comparison

Engineering Selection Recommendations

Both MP2013GQ-P and MP2013GQ-Z are active production parts from Monolithic Power Systems Inc. with full regulatory compliance. Selection between these parts should be based on supply chain availability and inventory requirements rather than technical performance, as all electrical and mechanical specifications are identical.

MP2013GQ-P is available in Tape & Reel packaging format with 808 units in current stock, suitable for automated assembly processes and high-volume production environments.

MP2013GQ-Z is available with 19,698 units in current stock, providing significantly higher inventory availability for applications with extended lead time requirements or larger procurement volumes.

Both parts maintain ROHS3 compliance and REACH unaffected status, meeting environmental and regulatory requirements for industrial and commercial applications. The MSL rating of 1 (Unlimited) indicates no moisture sensitivity restrictions during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can MP2013GQ-Z be used as a direct replacement for MP2013GQ-P in existing designs?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output voltage range (1.215V to 15V), current rating (150mA), dropout voltage (0.9V @ 150mA), and package configuration (8-QFN 3x3). No circuit modifications are required.

Q: What is the difference between MP2013GQ-P and MP2013GQ-Z?

A: The primary difference is packaging format. MP2013GQ-P is supplied in Tape & Reel format, while MP2013GQ-Z packaging format is unspecified. All electrical performance and mechanical characteristics are identical.

Q: Are both parts suitable for the same operating temperature range?

A: Yes. Both MP2013GQ-P and MP2013GQ-Z operate across -40°C to 125°C (TJ), making them suitable for industrial and extended temperature applications.

Q: Do both parts provide the same protection features?

A: Yes. Both include over current and over temperature protection, ensuring equivalent reliability and safety performance in circuit applications.

Q: Which part should be selected for high-volume production?

A: MP2013GQ-Z is recommended for high-volume applications due to significantly higher inventory availability (19,698 units versus 808 units). MP2013GQ-P in Tape & Reel format is preferred for automated assembly processes where reel packaging is required.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry identical MSL rating of 1 (Unlimited), meeting all environmental and regulatory requirements.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes. Both parts use identical 8-VDFN Exposed Pad package with 8-QFN (3x3) configuration, ensuring pin-for-pin compatibility and identical PCB footprint requirements.