MP2013AGQ-Z Equivalent & Substitute Parts

Part Overview

The MP2013AGQ-Z is a linear voltage regulator IC from Monolithic Power Systems designed for positive adjustable output applications. This Surface Mount device delivers 150mA output current in an 8-QFN (3x3) package with a maximum input voltage of 40V and adjustable output range from 1.215V to 15V. The part is currently Active in production status with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory availability, packaging format preferences, or automotive-grade qualification needs.

Key Parameters

Parameter	Value
Manufacturer	Monolithic Power Systems
Category	Power Management (PMIC)
Output Configuration	Positive Adjustable
Current Output	150mA
Voltage Input (Max)	40V
Voltage Output Range	1.215V to 15V
Package Type	8-VDFN Exposed Pad / 8-QFN (3x3)
Mounting Type	Surface Mount
Operating Temperature	-40°C to 125°C (TJ)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution logic for the MP2013AGQ-Z is based on the following allowed parameters:

Output configuration (Positive Adjustable)
Output current capability (150mA)
Maximum input voltage (40V)
Output voltage range (1.215V to 15V)
Package type (8-QFN 3x3)
Surface Mount mounting type
Operating temperature range (-40°C to 125°C)
Control features (Enable function)
Protection features (Over Current, Over Temperature)

Substitute parts are grouped into two categories:

Standard Grade (Non-Automotive): MP2013AGQ-P and MP2013AGQ-Z differ only in packaging format (Tape & Reel vs. Cut Tape & Digi-Reel).

Automotive Grade (AEC-Q100): MPQ2013AGQ-AEC1-Z, MPQ2013AGQ-AEC1-P, MPQ2013AGQ-Z, and MPQ2013AGQ-P are qualified to automotive standards with identical electrical performance but higher maximum supply current specification (50µA vs. 22µA) and increased maximum dropout voltage (1.1V vs. 0.85V @ 150mA).

Parameter Comparison

Part Number	Manufacturer	Packaging	Grade	Voltage Dropout (Max)	Current Supply (Max)	Inventory (Pcs)	Product Status
MP2013AGQ-Z	Monolithic Power Systems	Cut Tape & Digi-Reel	Standard	0.85V @ 150mA	22µA	50400	Active
MP2013AGQ-P	Monolithic Power Systems Inc.	Tape & Reel	Standard	0.85V @ 150mA	22µA	1638	Active
MPQ2013AGQ-AEC1-Z	Monolithic Power Systems Inc.	Cut Tape & Digi-Reel	Automotive (AEC-Q100)	1.1V @ 150mA	50µA	41676	Active
MPQ2013AGQ-AEC1-P	Monolithic Power Systems Inc.	Tape & Reel	Automotive (AEC-Q100)	1.1V @ 150mA	50µA	738	Active
MPQ2013AGQ-Z	Monolithic Power Systems Inc.	Cut Tape & Digi-Reel	Automotive	1.1V @ 150mA	50µA	3541	Active
MPQ2013AGQ-P	Monolithic Power Systems Inc.	Tape & Reel	Automotive	1.1V @ 150mA	50µA	19902	Active

Engineering Selection Recommendations

All substitute parts maintain Active product status and full RoHS3 compliance. Selection between standard and automotive-grade variants depends on application requirements:

For standard industrial applications: MP2013AGQ-Z and MP2013AGQ-P provide equivalent performance with lower maximum supply current (22µA) and tighter dropout voltage specification (0.85V @ 150mA).

For automotive applications: MPQ2013AGQ-AEC1-Z, MPQ2013AGQ-AEC1-P, MPQ2013AGQ-Z, and MPQ2013AGQ-P carry AEC-Q100 qualification and are suitable for automotive-grade designs. These variants specify higher maximum supply current (50µA) and increased dropout voltage (1.1V @ 150mA).

For packaging format selection: Cut Tape & Digi-Reel packaging (-Z suffix) is appropriate for lower-volume or manual assembly operations. Tape & Reel packaging (-P suffix) is optimized for high-volume automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can MP2013AGQ-P be used as a direct substitute for MP2013AGQ-Z?

A: Yes. Both parts are standard-grade variants with identical electrical specifications. The difference is packaging format only: MP2013AGQ-Z uses Cut Tape & Digi-Reel while MP2013AGQ-P uses Tape & Reel. Selection depends on assembly process requirements.

Q: What is the difference between standard-grade and automotive-grade variants?

A: Automotive-grade parts (MPQ prefix with AEC-Q100 qualification) specify maximum supply current of 50µA and maximum dropout voltage of 1.1V @ 150mA. Standard-grade parts specify 22µA supply current and 0.85V dropout voltage. Automotive variants are qualified for automotive environmental and reliability standards.

Q: Are automotive-grade parts backward compatible with standard applications?

A: Automotive-grade parts meet or exceed standard-grade electrical specifications and can be used in standard applications. However, they carry higher maximum supply current and dropout voltage ratings, which may not be necessary for non-automotive designs.

Q: What packaging format should be selected for high-volume production?

A: Tape & Reel packaging (-P suffix) is standard for automated pick-and-place assembly in high-volume manufacturing. Cut Tape & Digi-Reel (-Z suffix) is suitable for lower volumes or manual assembly operations.

Q: Are all substitute parts in the same 8-QFN (3x3) package?

A: Yes. All listed substitute parts use the 8-VDFN Exposed Pad package with 8-QFN (3x3) footprint, ensuring mechanical and thermal compatibility.

Q: Do all parts support the same output voltage range?

A: Yes. All substitute parts support adjustable output from 1.215V to 15V with 150mA output current capability and 40V maximum input voltage.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message