MP2013AGQ-5-Z Equivalent & Substitute Parts

Part Overview

The MP2013AGQ-5-Z is a linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This device delivers a fixed 5V positive output at 150mA with integrated over-current and over-temperature protection. The part is actively produced and maintains full RoHS3 compliance with unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified based on matching electrical specifications, package compatibility, and regulatory certifications to support component procurement flexibility and supply chain continuity.

Substiute Parts

MP2013AGQ-5-Z

Monolithic Power Systems Inc.In Stock: 50338MP2013AGQ-5-Z Datasheet

Current PartRFQ

MPQ2013AGQ-5-P

Monolithic Power Systems Inc.In Stock: 1117MPQ2013AGQ-5-P Datasheet

Parametric EquivalentRFQ

MPQ2013AGQ-5-Z

Monolithic Power Systems Inc.In Stock: 35424MPQ2013AGQ-5-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MP2013AGQ-5-Z are identified from the Monolithic Power Systems Inc. MPQ2013 series based on the following substitution criteria:

Matching Parameters (Required for Substitution):

• Output voltage: 5V fixed
• Output current: 150mA
• Input voltage maximum: 40V
• Package type: 8-VDFN Exposed Pad (3x3)
• Control features: Enable function
• Protection features: Over Current, Over Temperature
• Operating temperature range: -40°C to 125°C (TJ)
• Regulatory compliance: RoHS3, REACH Unaffected, MSL 1

Allowable Variations:

• Voltage dropout: Tolerance up to 1.1V @ 150mA (main part: 0.85V)
• Quiescent current: Tolerance up to 10 µA (main part: 8 µA)
• Supply current maximum: Tolerance up to 50 µA (main part: 48 µA)
• Packaging format: Bulk or Tape & Reel (TR)

Parameter Comparison

Engineering Selection Recommendations

All three parts—MP2013AGQ-5-Z, MPQ2013AGQ-5-P, and MPQ2013AGQ-5-Z—are active products from Monolithic Power Systems Inc. with identical RoHS3 compliance and MSL 1 ratings. Selection between these parts is determined by packaging requirements and acceptable performance tolerances:

MP2013AGQ-5-Z (Main Part): Select when bulk packaging is required and lowest voltage dropout specification (0.85V @ 150mA) is necessary for power-constrained applications.

MPQ2013AGQ-5-P and MPQ2013AGQ-5-Z (Substitutes): Select when Tape & Reel packaging is required for automated assembly processes. Both substitutes accept higher voltage dropout (1.1V @ 150mA) and slightly elevated quiescent current (10 µA) within the allowable parameter range for this product category. MPQ2013AGQ-5-Z offers higher inventory availability (35,400 pcs) compared to MPQ2013AGQ-5-P (1,021 pcs).

All parts maintain identical electrical performance in core functions: 5V fixed output, 150mA current delivery, 40V maximum input, Enable control, and Over Current/Over Temperature protection across the full -40°C to 125°C operating range.

Frequently Asked Questions (FAQ)

Q: Can MPQ2013AGQ-5-P or MPQ2013AGQ-5-Z be used as direct replacements for MP2013AGQ-5-Z?

A: Yes, both MPQ2013AGQ-5-P and MPQ2013AGQ-5-Z are parametric equivalents. The primary differences are packaging format (Tape & Reel vs. Bulk) and minor tolerance variations in voltage dropout and quiescent current, which remain within acceptable specifications for this linear regulator category.

Q: What is the difference between MPQ2013AGQ-5-P and MPQ2013AGQ-5-Z?

A: Both parts are identical in electrical specifications and package type (8-VDFN Exposed Pad). The difference is packaging format: MPQ2013AGQ-5-P uses Tape & Reel packaging, while MPQ2013AGQ-5-Z also uses Tape & Reel. The primary distinction is inventory availability, with MPQ2013AGQ-5-Z having significantly higher stock (35,400 pcs vs. 1,021 pcs).

Q: Are there any compliance or regulatory differences between these parts?

A: No. All three parts carry identical certifications: RoHS3 Compliant, REACH Unaffected, MSL 1 (Unlimited), and EAR99 classification. All are active products with no regulatory restrictions on substitution.

Q: What is the impact of the higher voltage dropout in the substitute parts?

A: The substitute parts (MPQ2013AGQ-5-P and MPQ2013AGQ-5-Z) have a maximum voltage dropout of 1.1V @ 150mA compared to 0.85V @ 150mA for the main part. This 0.25V difference affects power dissipation and thermal performance in applications with tight input voltage margins. For most standard 5V regulation applications, this variation is within acceptable tolerance.

Q: Can I mix packaging formats in the same assembly?

A: Packaging format selection (Bulk vs. Tape & Reel) is determined by manufacturing process requirements. Bulk packaging is suitable for manual or selective assembly, while Tape & Reel is required for high-speed automated pick-and-place equipment. The electrical performance is identical; selection depends on production methodology.