MP2013AGQ-33-P Equivalent & Substitute Parts

Part Overview

The MP2013AGQ-33-P is a linear voltage regulator IC from Monolithic Power Systems designed for positive fixed 3.3V output applications. This surface-mount device delivers 150mA output current in an 8-QFN (3x3) package with integrated over-current and over-temperature protection. The part is currently active in production and widely available in inventory. Substitute parts are identified to provide design flexibility, alternative packaging options, and extended qualification grades for specific application requirements.

Substiute Parts

MP2013AGQ-33-P

Monolithic Power SystemsIn Stock: 1028MP2013AGQ-33-P Datasheet

Current PartRFQ

MP2013GQ-33-Z

Monolithic Power Systems Inc.In Stock: 1490MP2013GQ-33-Z Datasheet

Parametric EquivalentRFQ

MPQ2013AGQ-33-AEC1-Z

Monolithic Power Systems Inc.In Stock: 39670MPQ2013AGQ-33-AEC1-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MP2013AGQ-33-P are identified based on electrical and mechanical parameter compatibility within the linear regulator category. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match):

• Output voltage: 3.3V fixed
• Output current capability: 150mA
• Input voltage rating: 40V maximum
• Operating temperature range: -40°C to 125°C
• Protection features: Over current and over temperature protection
• Control features: Enable function

Mechanical Parameters (Must Match):

• Package type: 8-QFN (3x3) with exposed pad
• Mounting type: Surface mount

Allowed Variations:

• Voltage dropout specification (within acceptable range for linear regulators)
• Packaging format (Tape & Reel vs. Cut Tape & Digi-Reel)
• Qualification grade (commercial vs. automotive AEC-Q100)
• Manufacturer suffix designations

Parameter Comparison

Engineering Selection Recommendations

MP2013GQ-33-Z: This part is electrically and mechanically identical to the MP2013AGQ-33-P with matching voltage dropout specifications. Both are commercial-grade devices with identical performance characteristics. Selection between these two is determined by packaging format availability and inventory requirements. Both parts maintain ROHS3 compliance and active production status.

MPQ2013AGQ-33-AEC1-Z: This part is qualified to automotive AEC-Q100 standards and is suitable for applications requiring automotive-grade components. The voltage dropout specification is 1.1V at 150mA, compared to 0.85V for the commercial-grade alternatives. This part is available in Cut Tape and Digi-Reel packaging formats. Selection of this part is appropriate when automotive qualification is a design requirement or when the higher dropout voltage is acceptable for the application.

Frequently Asked Questions (FAQ)

Q: Can MP2013GQ-33-Z be used as a direct replacement for MP2013AGQ-33-P?

A: Yes. Both parts are electrically and mechanically identical with matching output voltage (3.3V), output current (150mA), voltage dropout (0.85V @ 150mA), and package type (8-QFN 3x3). The difference is in manufacturer designation suffix. Both are commercial-grade, active production parts with ROHS3 compliance.

Q: What is the key difference between the commercial-grade and automotive-grade options?

A: The MPQ2013AGQ-33-AEC1-Z carries AEC-Q100 automotive qualification, making it suitable for automotive applications. The voltage dropout specification is higher at 1.1V compared to 0.85V for commercial grades. Selection depends on whether automotive qualification is required for your application.

Q: Are there package compatibility considerations when selecting substitutes?

A: All three parts use the same 8-QFN (3x3) package with exposed pad and surface-mount technology. The difference is in tape format: MP2013AGQ-33-P and MP2013GQ-33-Z are supplied in Tape & Reel format, while MPQ2013AGQ-33-AEC1-Z is available in Cut Tape and Digi-Reel format. PCB footprint and soldering requirements are identical.

Q: Which part should I select for high-volume production?

A: Inventory availability should be verified at the time of procurement. Current inventory levels are: MP2013AGQ-33-P (995 Pcs), MP2013GQ-33-Z (1398 Pcs), and MPQ2013AGQ-33-AEC1-Z (39625 Pcs). For applications without automotive requirements, MP2013GQ-33-Z or MP2013AGQ-33-P are appropriate. For high-volume needs, MPQ2013AGQ-33-AEC1-Z offers significantly higher availability.

Q: Can I use MPQ2013AGQ-33-AEC1-Z in a non-automotive application?

A: Yes. The automotive qualification is an additional certification that does not restrict use in non-automotive applications. The electrical and mechanical specifications remain compatible with the commercial-grade parts. The higher voltage dropout (1.1V vs. 0.85V) should be verified as acceptable for your specific circuit design.