MP2013AGG-Z Linear Voltage Regulator IC Equivalent & Substitute Parts

Part Overview

The MP2013AGG-Z is an active linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable regulator delivers 150mA output current in a compact 6-QFN (2x2) surface mount package. The device is designed for applications requiring adjustable output voltage regulation from 1.215V to 15V with input voltages up to 40V. As an active product with full RoHS3 compliance and unlimited moisture sensitivity rating, substitute parts are identified to support procurement flexibility, inventory optimization, and application-specific requirements such as automotive qualification.

Substiute Parts

MP2013AGG-Z

Monolithic Power Systems Inc.In Stock: 61040MP2013AGG-Z Datasheet

Current PartRFQ

MP2013AGG-P

Monolithic Power Systems Inc.In Stock: 1641MP2013AGG-P Datasheet

Parametric EquivalentRFQ

MPQ2013AGG-AEC1-P

Monolithic Power Systems Inc.In Stock: 1749MPQ2013AGG-AEC1-P Datasheet

Parametric EquivalentRFQ

MPQ2013AGG-P

Monolithic Power Systems Inc.In Stock: 1611MPQ2013AGG-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MP2013AGG-Z is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

• Output configuration: Positive adjustable
• Output current rating: 150mA
• Input voltage maximum: 40V
• Output voltage range: 1.215V to 15V
• Package type: 6-VDFN Exposed Pad / 6-QFN (2x2)
• Mounting type: Surface Mount
• Operating temperature range: -40°C to 125°C (TJ)
• Control features: Enable function
• Protection features: Over Current, Over Temperature

Allowable Variations:

• Packaging format (Tube vs. Tape & Reel)
• Voltage dropout specification (0.85V vs. 1.1V)
• Automotive qualification and AEC-Q100 certification
• Base product number designation (MP2013 vs. MPQ2013)

All identified substitutes maintain full parametric compatibility with the MP2013AGG-Z across electrical performance, thermal characteristics, and mechanical form factor.

Parameter Comparison

Engineering Selection Recommendations

MP2013AGG-P: Direct parametric equivalent with identical electrical specifications and voltage dropout performance. Differs only in packaging format (Tape & Reel vs. Tube). Suitable for high-volume production environments requiring reel-based component handling. Maintains standard industrial grade classification.

MPQ2013AGG-AEC1-P: Automotive-qualified variant with AEC-Q100 certification. Meets automotive industry reliability and qualification standards. Voltage dropout specification is 1.1V at 150mA, representing a 0.25V increase compared to the MP2013AGG-Z. Appropriate for automotive applications and safety-critical systems requiring formal automotive qualification. Tape & Reel packaging format.

MPQ2013AGG-P: Standard industrial grade variant with MPQ2013 base product designation. Voltage dropout specification is 1.1V at 150mA. Tape & Reel packaging format. Suitable for applications where automotive qualification is not required but higher dropout voltage tolerance is acceptable.

All substitutes maintain full compliance with RoHS3 and REACH requirements, identical thermal operating ranges, and equivalent control and protection features.

Frequently Asked Questions (FAQ)

Q: Can MP2013AGG-P be used as a direct replacement for MP2013AGG-Z?

A: Yes. MP2013AGG-P is a parametric equivalent with identical electrical performance and voltage dropout characteristics. The only difference is packaging format: MP2013AGG-Z is supplied in Tube format, while MP2013AGG-P is supplied in Tape & Reel format. Both are suitable for the same circuit applications.

Q: What is the difference between MPQ2013AGG-AEC1-P and MP2013AGG-Z?

A: MPQ2013AGG-AEC1-P is automotive-qualified with AEC-Q100 certification, making it suitable for automotive and safety-critical applications. The voltage dropout is specified at 1.1V @ 150mA compared to 0.85V @ 150mA for the MP2013AGG-Z. This higher dropout voltage must be evaluated for your specific application requirements. All other electrical parameters remain equivalent.

Q: Is the 6-QFN (2x2) package identical across all substitute parts?

A: Yes. All parts use the 6-VDFN Exposed Pad package with 6-QFN (2x2) footprint. The mechanical form factor, pin configuration, and PCB layout requirements are identical across MP2013AGG-Z, MP2013AGG-P, MPQ2013AGG-AEC1-P, and MPQ2013AGG-P.

Q: Which substitute should I select for automotive applications?

A: MPQ2013AGG-AEC1-P is the appropriate selection for automotive applications, as it carries AEC-Q100 qualification. This certification confirms compliance with automotive industry reliability and qualification standards.

Q: Are there any performance differences in quiescent current or PSRR between substitutes?

A: MP2013AGG-Z and MP2013AGG-P both specify 9 µA quiescent current. MPQ2013AGG-AEC1-P and MPQ2013AGG-P do not provide quiescent current specifications in the available data. PSRR is identical across all parts at 58dB ~ 41dB (100Hz ~ 1kHz).

Q: What does the packaging format difference (Tube vs. Tape & Reel) mean for my procurement?

A: Tube packaging is typically used for lower-volume or manual assembly processes. Tape & Reel packaging is standard for automated pick-and-place assembly and high-volume production. Select based on your manufacturing process requirements. Electrical performance is identical.