MP2013AGG-P Linear Voltage Regulator Equivalent & Substitute Parts

Part Overview

The MP2013AGG-P is an active linear voltage regulator IC from Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This positive adjustable regulator delivers 150mA output current in a compact 6-QFN (2x2) surface mount package. The device is currently in active production status with 1539 units in stock inventory.

Substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application qualifications such as automotive-grade certifications.

Substiute Parts

MP2013AGG-P

Monolithic Power Systems Inc.In Stock: 1641MP2013AGG-P Datasheet

Current PartRFQ

MPQ2013AGG-AEC1-P

Monolithic Power Systems Inc.In Stock: 1749MPQ2013AGG-AEC1-P Datasheet

Parametric EquivalentRFQ

MPQ2013AGG-P

Monolithic Power Systems Inc.In Stock: 1611MPQ2013AGG-P Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MP2013AGG-P are qualified based on the following electrical and mechanical parameters:

Critical Matching Parameters:

• Output configuration (Positive)
• Output type (Adjustable)
• Maximum input voltage (40V)
• Output voltage range (1.215V to 15V)
• Output current (150mA)
• Package type (6-VDFN Exposed Pad / 6-QFN 2x2)
• Operating temperature range (-40°C to 125°C)
• Control features (Enable function)
• Protection features (Over Current, Over Temperature)

Allowable Variation:

• Voltage dropout specification may vary within acceptable limits for the application
• Quiescent current and supply current specifications may differ
• PSRR performance remains consistent across the family
• Automotive qualification (AEC-Q100) represents an additional certification tier, not a functional difference

The identified substitutes maintain full parametric compatibility with the main part across all critical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

MP2013AGG-P (Standard Grade) Select this part for general industrial and commercial applications where automotive qualification is not required. This variant offers the lowest voltage dropout specification (0.85V @ 150mA) and is suitable for applications with tight power budget constraints.

MPQ2013AGG-AEC1-P (Automotive Grade, AEC-Q100 Qualified) Select this part for automotive applications requiring AEC-Q100 qualification. This variant meets automotive industry reliability and qualification standards. The higher voltage dropout specification (1.1V @ 150mA) must be evaluated against application thermal and efficiency requirements.

MPQ2013AGG-P (Standard Grade, MPQ Series) Select this part as an alternative to the MP2013AGG-P when inventory or supply chain considerations apply. This variant maintains identical electrical specifications to the standard grade MP2013AGG-P except for the voltage dropout parameter (1.1V @ 150mA).

All three parts are currently in active production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Selection between standard and automotive-grade variants depends solely on application requirements and qualification mandates.

Frequently Asked Questions (FAQ)

Q: Can MPQ2013AGG-AEC1-P be used as a direct replacement for MP2013AGG-P in non-automotive applications?

A: Yes. The MPQ2013AGG-AEC1-P maintains full electrical and mechanical compatibility with MP2013AGG-P. The AEC-Q100 qualification is an additional certification that does not restrict use in non-automotive applications. The voltage dropout difference (1.1V vs 0.85V) must be evaluated for thermal and efficiency impact in the specific circuit design.

Q: What is the significance of the voltage dropout difference between MP2013AGG-P (0.85V) and the substitute parts (1.1V)?

A: Voltage dropout determines the minimum input-to-output voltage differential required for proper regulator operation. A higher dropout specification (1.1V) requires greater headroom between input and output voltages. Applications with tight input voltage margins or low input voltage operation must account for this difference during circuit design validation.

Q: Are all three parts pin-compatible?

A: Yes. All three parts use the 6-VDFN Exposed Pad package (6-QFN 2x2) with identical pinout and footprint. PCB layout and schematic connections require no modification for substitution.

Q: What does AEC-Q100 qualification mean?

A: AEC-Q100 is an automotive industry standard qualification that certifies component reliability under automotive operating conditions, including temperature cycling, vibration, and humidity stress testing. This qualification is required for automotive applications but is not necessary for industrial or commercial use.

Q: Can these parts be used interchangeably in production?

A: Interchangeability depends on application requirements. For non-automotive applications, all three parts are functionally equivalent. For automotive applications, only MPQ2013AGG-AEC1-P meets the AEC-Q100 requirement. Design documentation and qualification procedures must specify which variant is approved for each application.