MP2002AGD-P Equivalent & Substitute Parts

Part Overview

The MP2002AGD-P is a Linear Voltage Regulator IC manufactured by Monolithic Power Systems Inc., classified as a Power Management (PMIC) component. This device functions as a positive adjustable output LDO (Low Dropout) regulator with 500mA output current capability in an 8-QFN (2x3) surface mount package. The MP2002AGD-P is an active product with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when components share identical electrical specifications, output configurations, package types, and regulatory compliance status. Identifying equivalent alternatives ensures design flexibility, supply chain continuity, and procurement optimization without compromising circuit performance or reliability.

Substiute Parts

MP2002AGD-P

Monolithic Power Systems Inc.In Stock: 1487MP2002AGD-P Datasheet

Current PartRFQ

MP2002AGD-Z

Monolithic Power Systems Inc.In Stock: 2453MP2002AGD-Z Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MP2002AGD-P are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters:

Electrical Specifications:

• Input voltage maximum: 6.5V
• Output voltage range: 0.5V to 5V (adjustable)
• Output current: 500mA
• Dropout voltage: 0.29V @ 500mA
• Control features: Enable and Power Good functions
• Protection: Over Current and Over Temperature

Mechanical & Package Specifications:

• Package type: 8-QFN (2x3) with exposed pad
• Mounting: Surface Mount
• Supplier device package: 8-QFN (2x3)

Regulatory & Compliance:

• RoHS3 Compliant
• MSL 1 (Unlimited)
• REACH Unaffected
• ECCN: EAR99
• Product Status: Active

Parts are considered substitutes only when all parameters listed above are identical. No deviations in electrical performance, package configuration, or compliance status are permitted for substitution classification.

Parameter Comparison

Engineering Selection Recommendations

MP2002AGD-P (Primary Part)

The MP2002AGD-P is an active product with full regulatory compliance. This part is suitable for new designs and ongoing production applications. Current inventory status shows 1449 pieces available as new original stock.

MP2002AGD-Z (Substitute Part)

The MP2002AGD-Z is a parametric equivalent to the MP2002AGD-P. Both parts share identical electrical specifications, package configuration, and regulatory compliance certifications. The MP2002AGD-Z is also an active product with higher inventory availability (2402 pieces). Selection between MP2002AGD-P and MP2002AGD-Z is based on supply chain availability and procurement requirements, as both parts are functionally and mechanically interchangeable.

Both parts are RoHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity ratings, making them suitable for standard PCB assembly and storage conditions without special handling requirements.

Frequently Asked Questions (FAQ)

Q: Are MP2002AGD-P and MP2002AGD-Z electrically interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, including input voltage maximum (6.5V), output voltage range (0.5V to 5V), output current (500mA), dropout voltage (0.29V @ 500mA), control features (Enable, Power Good), and protection features (Over Current, Over Temperature).

Q: Can MP2002AGD-Z be used as a direct replacement for MP2002AGD-P in existing designs?

A: Yes. Both parts use the same 8-QFN (2x3) package with exposed pad, identical pin configuration, and surface mount assembly process. No PCB layout modifications are required.

Q: What is the difference between MP2002AGD-P and MP2002AGD-Z?

A: The parts are functionally identical. The suffix designation (-P vs. -Z) indicates different manufacturing or distribution batches from Monolithic Power Systems Inc. All electrical, mechanical, and compliance parameters are equivalent.

Q: Are both parts suitable for new product designs?

A: Yes. Both MP2002AGD-P and MP2002AGD-Z are active products with full RoHS3 compliance and REACH unaffected status. Either part is appropriate for new designs.

Q: What is the MSL rating for these parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard PCB assembly and storage conditions apply without special handling requirements.

Q: Can these parts be used in applications requiring adjustable output voltage?

A: Yes. Both parts feature adjustable output type with voltage range from 0.5V to 5V, controlled through external resistor networks as specified in the device datasheet.

Q: What protection features are included in these regulators?

A: Both parts include Over Current and Over Temperature protection features, providing circuit-level safeguards against fault conditions.