MOS2CT52R623J Equivalent & Substitute Parts

Part Overview

The MOS2CT52R623J is a 62 kOhms ±5% 2W through-hole axial resistor manufactured by KOA Speer Electronics, Inc. This metal oxide film resistor features flame retardant coating and safety construction, designed for applications requiring reliable performance across industrial temperature ranges. The part is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are required due to inventory constraints, supply chain considerations, or application-specific packaging needs.

Substiute Parts

MOS2CT52R623J

KOA Speer Electronics, Inc.In Stock: 1957MOS2CT52R623J Datasheet

Current PartRFQ

RSF200JB-73-62K

YAGEOIn Stock: 5659RSF200JB-73-62K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical parameters:

• Resistance Value: 62 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Power Rating: 2W (exact match required)
• Composition: Metal Oxide Film (exact match required)
• Package Type: Axial (exact match required)
• Termination Count: 2 (exact match required)
• Compliance: ROHS3 Compliant (required for equivalent substitution)

The substitute part RSF200JB-73-62K meets all critical electrical and mechanical parameters. Physical dimensions vary between the main part and substitute, with the substitute featuring a larger diameter (0.197" vs 0.157") and length (0.610" vs 0.472"). Both parts operate within overlapping temperature ranges suitable for industrial applications.

Parameter Comparison

Engineering Selection Recommendations

Both the MOS2CT52R623J and RSF200JB-73-62K are Active status products with full ROHS3 compliance and REACH unaffected status. Selection between these parts is based on the following criteria:

MOS2CT52R623J (KOA Speer) is selected when:

• Compact form factor is required (smaller diameter and length)
• Space-constrained PCB layouts necessitate minimal component footprint
• Flame retardant coating specification is explicitly required

RSF200JB-73-62K (YAGEO) is selected when:

• Extended operating temperature capability to 235°C is required
• Larger physical dimensions are acceptable within the application
• Flame proof construction meets application safety requirements
• Higher inventory availability is advantageous

Both parts satisfy identical electrical specifications (62 kOhms, ±5%, 2W) and are suitable for direct substitution in circuits where the physical dimension differences do not create layout conflicts.

Frequently Asked Questions (FAQ)

Q: Can RSF200JB-73-62K replace MOS2CT52R623J in all applications?

A: RSF200JB-73-62K is electrically equivalent and meets all compliance requirements. Physical dimensions differ; verify PCB layout accommodates the larger form factor (0.197" diameter × 0.610" length versus 0.157" diameter × 0.472" length).

Q: What is the primary difference between these two resistors?

A: The primary differences are physical dimensions and maximum operating temperature. RSF200JB-73-62K operates to 235°C versus 200°C for MOS2CT52R623J. Both deliver identical electrical performance at 62 kOhms ±5% 2W.

Q: Are both parts ROHS3 compliant?

A: Yes. Both MOS2CT52R623J and RSF200JB-73-62K are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Does packaging format affect substitution eligibility?

A: Both parts use axial through-hole packaging. The main part is supplied in Cut Tape format while the substitute is supplied in Bulk format. This does not affect electrical or mechanical compatibility; it affects only procurement and handling logistics.

Q: What is the temperature coefficient difference?

A: MOS2CT52R623J specifies ±300ppm/°C temperature coefficient. RSF200JB-73-62K does not provide temperature coefficient data in the available specifications. Both operate within their specified temperature ranges with metal oxide film composition.

Q: Can these parts be used interchangeably on existing PCBs?

A: Electrical interchangeability is confirmed. Physical interchangeability requires verification that PCB layout and component spacing accommodate the larger dimensions of RSF200JB-73-62K (0.197" diameter × 0.610" length).