MOS2CT52R160J Equivalent & Substitute Parts

Part Overview

The MOS2CT52R160J is a 16 Ohm, 2W through-hole axial resistor manufactured by KOA Speer Electronics, Inc. This metal oxide film resistor features flame retardant coating and safety design, operating across a temperature range of -55°C to 200°C. The component is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

MOS2CT52R160J

KOA Speer Electronics, Inc.In Stock: 2407MOS2CT52R160J Datasheet

Current PartRFQ

RSF200JB-73-16R

YAGEOIn Stock: 1361RSF200JB-73-16R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MOS2CT52R160J with equivalent parts is determined by strict alignment of the following critical parameters:

Electrical Parameters:

• Resistance value: 16 Ohms
• Tolerance: ±5%
• Power rating: 2W
• Composition: Metal Oxide Film

Mechanical Parameters:

• Package configuration: Axial through-hole
• Number of terminations: 2
• Physical form factor: Axial lead configuration

Compliance Parameters:

• RoHS3 compliance status
• REACH unaffected classification
• ECCN and HTSUS alignment

The substitute part RSF200JB-73-16R meets all critical electrical and mechanical parameters. Physical dimensions vary between the main part and substitute; however, both maintain axial package compatibility for through-hole PCB mounting applications.

Parameter Comparison

Engineering Selection Recommendations

Both the MOS2CT52R160J and RSF200JB-73-16R are Active product status components with full ROHS3 compliance and REACH unaffected classification. Selection between these parts is based on the following engineering criteria:

MOS2CT52R160J (KOA Speer Electronics, Inc.):

• Primary selection for applications requiring the specified 4.00mm x 12.00mm form factor
• Suitable for space-constrained PCB layouts
• Temperature coefficient of ±300ppm/°C specified
• Operating temperature range: -55°C to 200°C

RSF200JB-73-16R (YAGEO):

• Alternative selection when MOS2CT52R160J availability is limited
• Larger physical dimensions (5.00mm x 15.50mm) accommodate applications with less spatial constraints
• Extended operating temperature range: -55°C to 235°C provides thermal margin for high-temperature applications
• Flame proof construction versus flame retardant coating on primary part

Both components satisfy identical electrical specifications (16 Ohms, ±5%, 2W, metal oxide film) and maintain axial through-hole compatibility. PCB layout verification is required when substituting due to dimensional differences.

Frequently Asked Questions (FAQ)

Q: Can RSF200JB-73-16R be used as a direct replacement for MOS2CT52R160J?

A: Yes, RSF200JB-73-16R is electrically and mechanically compatible as a substitute. Both components are 16 Ohm, ±5%, 2W metal oxide film axial resistors with identical electrical performance. Physical dimensions differ; the substitute part is larger (5.00mm x 15.50mm versus 4.00mm x 12.00mm). PCB layout verification is required to confirm clearance and mounting compatibility.

Q: What are the key electrical parameters that must match for substitution?

A: Substitution requires matching of resistance value (16 Ohms), tolerance (±5%), power rating (2W), and composition (metal oxide film). These parameters determine functional equivalence in circuit operation.

Q: Are there temperature-related differences between these parts?

A: The MOS2CT52R160J operates from -55°C to 200°C with a temperature coefficient of ±300ppm/°C. The RSF200JB-73-16R operates from -55°C to 235°C. The substitute part provides extended high-temperature capability. Both parts are suitable for standard industrial temperature ranges.

Q: Do both parts meet the same compliance standards?

A: Yes. Both MOS2CT52R160J and RSF200JB-73-16R are ROHS3 compliant and REACH unaffected. Both carry identical ECCN (EAR99) and HTSUS (8533.21.0090) classifications.

Q: What is the difference between flame retardant and flame proof coatings?

A: The MOS2CT52R160J features flame retardant coating, while the RSF200JB-73-16R features flame proof construction. Both provide safety characteristics; flame proof construction offers enhanced fire resistance properties.

Q: How do packaging differences affect component selection?

A: The MOS2CT52R160J is supplied in Cut Tape (CT) packaging, while RSF200JB-73-16R is supplied in Bulk packaging. Packaging format affects order quantities and handling procedures but does not impact electrical or mechanical performance. Component form factor (axial) remains identical.

Q: Can these parts be used interchangeably in existing designs?

A: Electrical interchangeability is confirmed. Mechanical interchangeability requires PCB layout verification due to dimensional differences. The larger substitute part (5.00mm diameter versus 4.00mm) must clear surrounding components and PCB features.