MOS2C471J Equivalent & Substitute Parts

Part Overview

The MOS2C471J is a 470 Ohms ±5% 2W through hole resistor manufactured by KOA Speer Electronics, Inc. This metal oxide film resistor features flame proof construction and safety certification, designed for axial through-hole applications. The part is currently active in production with 914 units in stock. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to packaging format availability, inventory constraints, or application-specific packaging needs.

Substiute Parts

MOS2C471J

KOA Speer Electronics, Inc.In Stock: 988MOS2C471J Datasheet

Current PartRFQ

MOS2CT52R471J

KOA Speer Electronics, Inc.In Stock: 2935MOS2CT52R471J Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MOS2C471J is based on strict equivalence of the following critical parameters:

• Resistance value: 470 Ohms
• Tolerance: ±5%
• Power rating: 2W
• Composition: Metal Oxide Film
• Package configuration: Axial through-hole
• Temperature coefficient: ±300ppm/°C
• Operating temperature range: -55°C to 200°C
• Physical dimensions: 0.157" Dia x 0.472" L (4.00mm x 12.00mm)
• Regulatory compliance: ROHS3 Compliant

The primary difference between the main part and its substitute is the packaging format: the MOS2C471J is supplied in bulk packaging, while the MOS2CT52R471J is supplied in cut tape format. Both parts are manufactured by KOA Speer Electronics, Inc., and share identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the MOS2C471J and MOS2CT52R471J are active production parts manufactured by KOA Speer Electronics, Inc., with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on packaging requirements: bulk packaging for the MOS2C471J or cut tape packaging for the MOS2CT52R471J. Both parts meet identical electrical specifications and are suitable for applications requiring 470 Ohm, 2W metal oxide film resistors with axial through-hole configuration.

Frequently Asked Questions (FAQ)

Q: Can MOS2CT52R471J be used as a direct replacement for MOS2C471J?

A: Yes. Both parts have identical electrical specifications (470 Ohms ±5%, 2W, ±300ppm/°C, -55°C to 200°C operating range) and physical dimensions (0.157" Dia x 0.472" L). The difference is packaging format: bulk versus cut tape.

Q: What is the difference between bulk and cut tape packaging?

A: Bulk packaging supplies loose components, while cut tape packaging supplies components on continuous tape suitable for automated pick-and-place equipment. Electrical and mechanical performance are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both MOS2C471J and MOS2CT52R471J are ROHS3 compliant and REACH unaffected.

Q: Can these resistors be used in high-temperature applications?

A: Yes. Both parts are rated for operating temperatures from -55°C to 200°C with a temperature coefficient of ±300ppm/°C.

Q: Are the physical dimensions identical between the two parts?

A: Yes. Both parts have identical axial through-hole dimensions of 0.157" Dia x 0.472" L (4.00mm x 12.00mm).