M-ODC5 DC Output Module Equivalent & Substitute Parts

Part Overview

The M-ODC5 is a DC output module manufactured by Sensata-Crydom, designed to provide isolated DC switching control with a 3A output capacity. This module accepts a 5VDC input signal and delivers output switching across a 3 to 60VDC range. The product is currently active in production and widely available in inventory. Substitute parts may be required due to packaging preferences, lead time considerations, compliance requirements, or specific application constraints.

Substiute Parts

M-ODC5

Sensata-CrydomIn Stock: 960M-ODC5 Datasheet

Current PartRFQ

70M-ODC5

Grayhill Inc.In Stock: 130570M-ODC5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the M-ODC5 is determined by the following critical parameters:

• Output current capacity: 3A minimum
• Input voltage: 5VDC
• Output voltage range: 3 to 60VDC
• Form factor: Mini style
• Module type: DC output switching module

The 70M-ODC5 manufactured by Grayhill Inc. meets these core electrical requirements. Both parts deliver identical output current capacity, input voltage specification, and output voltage range. Both are housed in mini-style form factors with red coloring. Differences exist in input current draw, switching response times, packaging format, and regulatory compliance status, which are documented in the parameter comparison below.

Parameter Comparison

Engineering Selection Recommendations

Both the M-ODC5 and 70M-ODC5 satisfy the core electrical and mechanical requirements for DC output module applications requiring 3A switching capacity at 5VDC input and 3 to 60VDC output range.

The M-ODC5 is ROHS3 compliant and suitable for applications subject to RoHS regulations. The 70M-ODC5 is not RoHS compliant and should be selected only for applications where RoHS compliance is not required.

The 70M-ODC5 exhibits faster switching response times (0.02ms turn-on versus 0.10ms, and 0.05ms turn-off versus 0.75ms) and lower input current draw (14 mA versus 18 mA). These characteristics may be advantageous in timing-critical or power-constrained applications.

Packaging format differs: M-ODC5 is supplied in trays, while 70M-ODC5 is supplied in bulk. Selection should align with procurement and assembly requirements.

Frequently Asked Questions (FAQ)

Q: Can the 70M-ODC5 be used as a direct replacement for the M-ODC5?

A: Electrical and mechanical compatibility exists for applications not subject to RoHS compliance requirements. Both modules provide identical output current capacity, input voltage, and output voltage range specifications. Switching response time differences must be evaluated against application timing requirements.

Q: What is the primary difference between these two modules?

A: The M-ODC5 is ROHS3 compliant, while the 70M-ODC5 is not. The 70M-ODC5 offers faster switching times and lower input current consumption. Packaging differs: tray versus bulk.

Q: Does the faster switching time of the 70M-ODC5 affect compatibility?

A: Faster switching times represent improved performance characteristics and do not create compatibility issues. Applications designed for the M-ODC5 switching response will function with the 70M-ODC5. Applications with specific minimum switching speed requirements may benefit from the 70M-ODC5 performance advantage.

Q: Are there inventory considerations for these parts?

A: The M-ODC5 has 864 pieces in stock. The 70M-ODC5 has 1277 pieces in stock. Availability may influence selection based on project timeline requirements.

Q: What packaging format should I select?

A: The M-ODC5 is supplied in trays, suitable for organized component management and reduced handling. The 70M-ODC5 is supplied in bulk format. Selection should align with your assembly process and component handling procedures.