MOC5009SVM Equivalent & Substitute Parts

Part Overview

The MOC5009SVM is a logic output optoisolator manufactured by onsemi, designed for 1MHz applications with open collector output configuration and 7500Vpk isolation voltage rating. This component is packaged in a 6-SMD, Gull Wing surface mount package and is classified as obsolete in the current product lifecycle. Due to its obsolete status, identifying functionally compatible substitute parts is essential for ongoing system maintenance, design updates, and procurement continuity.

Substiute Parts

MOC5009SVM

onsemiIn Stock: 736MOC5009SVM Datasheet

Current PartRFQ

H11L2SVM

onsemiIn Stock: 1534H11L2SVM Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MOC5009SVM is determined by the following critical parameters:

• Package Compatibility: 6-SMD, Gull Wing surface mount configuration
• Functional Architecture: Single-channel, DC input, open collector output optoisolator
• Electrical Performance: 1MHz data rate capability and 50mA output current per channel
• Isolation Voltage: Minimum isolation rating of 4170Vrms or equivalent peak voltage specification

The H11L2SVM meets these substitution criteria. While the H11L2SVM specifies 4170Vrms isolation (lower than the MOC5009SVM's 7500Vpk), it maintains identical channel configuration, output type, data rate, and package format. The H11L2SVM is an active product with current manufacturing support and improved compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The H11L2SVM is the designated substitute for the obsolete MOC5009SVM based on functional equivalence and product lifecycle status. Selection of the H11L2SVM provides the following advantages:

• Active Product Status: The H11L2SVM is in active production with ongoing manufacturer support and availability assurance.
• Regulatory Compliance: ROHS3 compliance status meets current environmental and regulatory requirements, whereas the MOC5009SVM is RoHS non-compliant.
• Electrical Compatibility: Identical channel count, input/output configuration, data rate, and output current specifications ensure direct functional replacement in existing circuit designs.
• Package Compatibility: Identical 6-SMD, Gull Wing surface mount package enables direct PCB layout compatibility without redesign.

Applications requiring isolation voltages exceeding 4170Vrms must conduct isolation voltage margin analysis to determine suitability of the H11L2SVM for the specific circuit environment.

Frequently Asked Questions (FAQ)

Q: Can the H11L2SVM directly replace the MOC5009SVM in existing designs?

A: Yes, for applications where the isolation voltage requirement does not exceed 4170Vrms. Both components share identical package format, channel configuration, output type, data rate, and output current specifications. PCB layout and schematic integration remain unchanged.

Q: What is the isolation voltage difference between these parts?

A: The MOC5009SVM specifies 7500Vpk isolation voltage, while the H11L2SVM specifies 4170Vrms isolation voltage. The H11L2SVM provides lower isolation voltage rating. Circuit designs must confirm that 4170Vrms isolation meets the application's isolation requirements.

Q: Why is the MOC5009SVM obsolete?

A: The MOC5009SVM is classified as obsolete in the current onsemi product portfolio. The H11L2SVM represents the active equivalent product line with ongoing manufacturing and support.

Q: Are there packaging differences between these optoisolators?

A: No. Both the MOC5009SVM and H11L2SVM use identical 6-SMD, Gull Wing surface mount packaging. No PCB layout modifications are required for substitution.

Q: What compliance certifications differ between these parts?

A: The MOC5009SVM is RoHS non-compliant, while the H11L2SVM is ROHS3 compliant. Both parts are REACH Unaffected and classified under ECCN EAR99. Applications subject to RoHS regulatory requirements must use the H11L2SVM.

Q: Are the electrical performance characteristics identical?

A: Core performance parameters are identical: 1MHz data rate, 50mA output current per channel, DC input type, and open collector output configuration. The H11L2SVM provides additional specification detail including propagation delay (4µs), rise/fall time (100ns), forward voltage (1.2V), and operating temperature range (-40°C to 85°C).