MOC5007VM Equivalent & Substitute Parts

Part Overview

The MOC5007VM is a logic output optoisolator manufactured by onsemi, designed for applications requiring galvanic isolation with open collector output configuration. This component features 1MHz data rate capability and 7500Vpk isolation voltage rating in a 6-DIP through-hole package. The MOC5007VM is classified as obsolete, making identification of functionally compatible alternatives essential for ongoing system support and new design implementations.

Substiute Parts

MOC5007VM

onsemiIn Stock: 967MOC5007VM Datasheet

Current PartRFQ

H11L1VM

onsemiIn Stock: 22380H11L1VM Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MOC5007VM is determined by the following critical parameters:

• Package compatibility: 6-DIP (0.300", 7.62mm) through-hole mounting
• Channel configuration: Single channel (1/0 input/output)
• Output architecture: Open collector topology
• Data rate: 1MHz minimum
• Current capacity: 50 mA per channel minimum
• Input type: DC input
• Isolation voltage: Minimum 4170Vrms equivalent or higher

The H11L1VM meets these substitution criteria while offering enhanced specifications and active product status.

Parameter Comparison

Engineering Selection Recommendations

The H11L1VM is the designated substitute for the obsolete MOC5007VM based on the following engineering criteria:

Functional Compatibility: Both components share identical channel configuration (1 channel), output topology (open collector), data rate (1MHz), and output current capacity (50 mA). Package geometry and pinout are identical, enabling direct mechanical and electrical substitution.

Isolation Voltage: The H11L1VM provides 4170Vrms isolation, which is lower than the MOC5007VM's 7500Vpk specification. Applications requiring isolation voltage exceeding 4170Vrms must evaluate system requirements before substitution.

Product Status and Compliance: The H11L1VM is an active product with ROHS3 compliance, ensuring long-term availability and regulatory alignment. The MOC5007VM's obsolete status and RoHS non-compliance status make the H11L1VM the preferred choice for new designs and ongoing production support.

Enhanced Specifications: The H11L1VM provides documented propagation delay (4µs maximum), rise/fall time (100ns typical), forward voltage (1.2V typical), and operating temperature range (-40°C to 85°C), offering superior design documentation compared to the MOC5007VM.

Frequently Asked Questions (FAQ)

Q: Can the H11L1VM directly replace the MOC5007VM in existing designs?

A: Yes, for applications where the isolation voltage requirement does not exceed 4170Vrms. Both components feature identical 6-DIP package geometry, single-channel open collector output, 1MHz data rate, and 50 mA output current. Pin-for-pin substitution is possible without circuit modification.

Q: What is the isolation voltage difference between these components?

A: The MOC5007VM specifies 7500Vpk isolation voltage, while the H11L1VM provides 4170Vrms isolation. These are equivalent specifications expressed in different units (peak versus RMS). Applications requiring isolation voltage above 4170Vrms must confirm system requirements before substitution.

Q: Are there packaging differences between MOC5007VM and H11L1VM?

A: No. Both components use 6-DIP (0.300", 7.62mm) through-hole packages with identical pinout and mechanical dimensions, enabling direct board-level substitution.

Q: Why is the H11L1VM preferred over the MOC5007VM?

A: The H11L1VM is an active product with ROHS3 compliance and documented electrical specifications, ensuring long-term availability and regulatory compliance. The MOC5007VM is obsolete and RoHS non-compliant, making it unsuitable for new designs and difficult to source for production.

Q: What are the input current requirements for each component?

A: The MOC5007VM specifies maximum DC forward current of 1.6mA. The H11L1VM specifies maximum DC forward current of 30mA, providing greater input current capability and design flexibility.

Q: Are operating temperature ranges specified for both components?

A: The MOC5007VM does not provide an operating temperature range specification. The H11L1VM specifies -40°C to 85°C operating temperature range, enabling use in extended temperature applications.