MOC5007SVM Equivalent & Substitute Parts

Part Overview

The MOC5007SVM is a logic output optoisolator manufactured by onsemi, designed for applications requiring galvanic isolation with open collector output configuration. This component features 1MHz data rate capability and 7500Vpk isolation voltage rating in a 6-SMD surface mount package. The MOC5007SVM is classified as obsolete, making identification of functionally equivalent substitute components essential for ongoing system support and new design implementations.

Substiute Parts

MOC5007SVM

onsemiIn Stock: 853MOC5007SVM Datasheet

Current PartRFQ

H11L1SVM

onsemiIn Stock: 5833H11L1SVM Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MOC5007SVM is determined by the following critical parameters:

• Isolation Voltage: The MOC5007SVM specifies 7500Vpk isolation. Substitute components must maintain isolation voltage at or above this threshold to preserve system safety margins.
• Output Configuration: Open collector output type is mandatory for circuit compatibility.
• Data Rate: 1MHz operation must be supported.
• Channel Count: Single channel configuration.
• Package Type: 6-SMD, Gull Wing surface mount package ensures mechanical and electrical compatibility.
• Input Type: DC input requirement.
• Output Current: 50 mA per channel capability.

The H11L1SVM meets the core functional requirements of channel count, output type, data rate, package configuration, and input type. However, the isolation voltage specification differs: H11L1SVM provides 4170Vrms isolation, which is lower than the MOC5007SVM's 7500Vpk rating. This difference must be evaluated against specific application isolation requirements.

Parameter Comparison

Engineering Selection Recommendations

The H11L1SVM is an active product with ROHS3 compliance, providing advantages over the obsolete MOC5007SVM for new designs and ongoing production. Both components share identical package configuration, channel count, output type, data rate, and output current specifications.

The primary technical distinction is isolation voltage: MOC5007SVM specifies 7500Vpk while H11L1SVM specifies 4170Vrms. Applications requiring the full 7500Vpk isolation margin of the MOC5007SVM cannot be directly substituted with H11L1SVM without circuit redesign or isolation architecture modification.

For applications where the 4170Vrms isolation of H11L1SVM meets system requirements, this component offers the advantage of active product status and regulatory compliance, supporting long-term supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can H11L1SVM directly replace MOC5007SVM in existing designs?

A: Direct replacement is possible only if the application isolation voltage requirement does not exceed 4170Vrms. The H11L1SVM provides lower isolation voltage than the MOC5007SVM's 7500Vpk specification. System isolation architecture must be evaluated to confirm compatibility.

Q: Are the package configurations identical?

A: Yes. Both MOC5007SVM and H11L1SVM use 6-SMD, Gull Wing surface mount packages, ensuring mechanical and PCB layout compatibility.

Q: What is the significance of the RoHS compliance difference?

A: MOC5007SVM is RoHS non-compliant while H11L1SVM is ROHS3 compliant. For new designs and manufacturing environments subject to RoHS regulations, H11L1SVM is the appropriate selection.

Q: Do both components support the same data rate?

A: Yes. Both components operate at 1MHz data rate with identical output current capability of 50 mA per channel.

Q: What is the difference in forward current specifications?

A: MOC5007SVM specifies maximum DC forward current of 1.6mA, while H11L1SVM specifies 30mA maximum. This difference reflects component design variations but does not affect substitution feasibility for most applications, as forward current is typically determined by external circuit design.