MOC5007FVM Equivalent & Substitute Parts

Part Overview

The MOC5007FVM is a logic output optoisolator manufactured by onsemi, designed for 1MHz applications with open collector output configuration and 7500Vpk isolation voltage rating. This component features a single channel with DC input type and is packaged in a 6-SMD, Gull Wing surface mount configuration.

The MOC5007FVM is classified as obsolete. Identifying suitable substitute components is necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Substiute Parts

MOC5007FVM

onsemiIn Stock: 952MOC5007FVM Datasheet

Current PartRFQ

H11L1SVM

onsemiIn Stock: 5833H11L1SVM Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MOC5007FVM is based on the following critical parameters:

• Number of Channels: Must be 1 channel
• Output Type: Must be open collector configuration
• Mounting Type: Must be surface mount
• Package / Case: Must be 6-SMD, Gull Wing
• Data Rate: Must support 1MHz operation
• Current - Output / Channel: Must support 50 mA minimum
• Input Type: Must be DC

The H11L1SVM meets these core functional and mechanical requirements. While the H11L1SVM provides a lower isolation voltage rating (4170Vrms versus 7500Vpk), it maintains compatibility across all other critical parameters including channel count, output type, data rate, output current capability, and package configuration.

Parameter Comparison

Engineering Selection Recommendations

The H11L1SVM is an active product with ROHS3 compliance, providing supply chain continuity and regulatory alignment advantages over the obsolete MOC5007FVM. Both components share identical mechanical packaging (6-SMD, Gull Wing), channel configuration, input/output characteristics, and data rate specifications.

The primary technical difference is the isolation voltage rating. The MOC5007FVM specifies 7500Vpk isolation, while the H11L1SVM provides 4170Vrms isolation. Component selection should be based on the specific isolation voltage requirement of the application circuit.

Both components carry identical REACH and ECCN classifications (REACH Unaffected, EAR99), and both feature unlimited moisture sensitivity rating (MSL 1).

Frequently Asked Questions (FAQ)

Q: Can the H11L1SVM directly replace the MOC5007FVM in existing designs?

A: Direct replacement is possible from a mechanical and functional standpoint. Both components use identical 6-SMD, Gull Wing packaging and support the same 1MHz data rate with 50 mA output current capability. However, the isolation voltage difference must be evaluated against circuit requirements. If the application requires 7500Vpk isolation specifically, the H11L1SVM's 4170Vrms rating may not be suitable.

Q: What are the key differences between these optoisolators?

A: The primary differences are isolation voltage rating (7500Vpk for MOC5007FVM versus 4170Vrms for H11L1SVM), product status (obsolete versus active), and RoHS compliance (non-compliant versus ROHS3 compliant). All other functional parameters including channel count, output type, data rate, and output current are identical.

Q: Are there any supply chain advantages to using the H11L1SVM?

A: Yes. The H11L1SVM is an active product with significantly higher inventory availability (5743 pieces in stock versus 913 pieces for the obsolete MOC5007FVM). The H11L1SVM also meets ROHS3 compliance requirements, which may be necessary for new production designs subject to regulatory requirements.

Q: Does the package configuration remain the same?

A: Yes. Both the MOC5007FVM and H11L1SVM use identical 6-SMD, Gull Wing surface mount packaging. No PCB layout modifications are required for mechanical compatibility.

Q: What is the isolation voltage difference and when does it matter?

A: The MOC5007FVM provides 7500Vpk isolation while the H11L1SVM provides 4170Vrms isolation. The selection between these components depends on the maximum isolation voltage required by the application circuit. If the design specifies a minimum isolation voltage above 4170Vrms, the H11L1SVM would not be suitable.