MOC3052M Optoisolator - Equivalent & Substitute Parts

Part Overview

The MOC3052M is an optoisolator with triac output, rated for 5000Vrms isolation voltage, designed for single-channel applications requiring galvanic isolation in through-hole 6-DIP packaging. This component is actively manufactured by LITEON and maintains ROHS3 compliance. Substitute parts may be required due to inventory constraints, regional availability, or specific application requirements where alternative electrical parameters remain within acceptable operating ranges.

Substiute Parts

MOC3052M
LITEONIn Stock: 29299MOC3052M Datasheet
MOC3052M
Current Part
MOC3051TVM
onsemiIn Stock: 2323MOC3051TVM Datasheet
MOC3051TVM
MFR Recommended

Key Parameters

Parameter MOC3052M
Manufacturer LITEON
Category Optoisolators
Output Type Triac
Number of Channels 1
Voltage - Isolation 5000Vrms
Voltage - Off State 600V
Static dV/dt (Min) 1kV/µs
Current - LED Trigger (Ift) (Max) 10mA
Current - Hold (Ih) (Typ) 400µA
Voltage - Forward (Vf) (Typ) 1.2V
Current - DC Forward (If) (Max) 50mA
Operating Temperature Range -40°C to 100°C
Mounting Type Through Hole
Package / Case 6-DIP (0.400", 10.16mm)
RoHS Status ROHS3 Compliant
Product Status Active

Substitute Part Grouping Explanation

The MOC3051TVM (onsemi) qualifies as a substitute for the MOC3052M based on the following alignment criteria:

Matching Parameters:

  • Output Type: Triac (both single-channel)
  • Voltage - Off State: 600V (identical)
  • Static dV/dt (Min): 1kV/µs (identical)
  • Mounting Type: Through Hole (identical)
  • Package / Case: 6-DIP (0.400", 10.16mm) (identical)
  • RoHS Status: ROHS3 Compliant (identical)
  • Product Status: Active (both actively manufactured)
  • Base Product Number: MOC305 (same series)

Allowable Parameter Variations:

  • Voltage - Isolation: 4170Vrms (MOC3051TVM) vs. 5000Vrms (MOC3052M) — lower isolation rating acceptable for applications not requiring maximum isolation specification
  • Current - LED Trigger (Ift) (Max): 15mA (MOC3051TVM) vs. 10mA (MOC3052M) — higher trigger current acceptable where driver capability exists
  • Current - Hold (Ih) (Typ): 220µA (MOC3051TVM) vs. 400µA (MOC3052M) — lower hold current acceptable
  • Voltage - Forward (Vf) (Typ): 1.18V (MOC3051TVM) vs. 1.2V (MOC3052M) — negligible difference
  • Current - DC Forward (If) (Max): 60mA (MOC3051TVM) vs. 50mA (MOC3052M) — higher forward current acceptable
  • Operating Temperature Range: -40°C to 85°C (MOC3051TVM) vs. -40°C to 100°C (MOC3052M) — narrower range acceptable for standard industrial applications

Parameter Comparison

Parameter MOC3052M (LITEON) MOC3051TVM (onsemi) Compatibility Notes
Output Type Triac Triac Identical
Number of Channels 1 1 Identical
Voltage - Isolation 5000Vrms 4170Vrms MOC3051TVM rated lower; acceptable for non-maximum isolation applications
Voltage - Off State 600V 600V Identical
Static dV/dt (Min) 1kV/µs 1kV/µs Identical
Current - LED Trigger (Ift) (Max) 10mA 15mA MOC3051TVM requires higher trigger current; verify driver capability
Current - Hold (Ih) (Typ) 400µA 220µA MOC3051TVM lower; acceptable
Voltage - Forward (Vf) (Typ) 1.2V 1.18V Negligible difference
Current - DC Forward (If) (Max) 50mA 60mA MOC3051TVM higher; acceptable
Operating Temperature Range -40°C to 100°C -40°C to 85°C MOC3051TVM narrower range; acceptable for standard industrial use
Mounting Type Through Hole Through Hole Identical
Package / Case 6-DIP (0.400", 10.16mm) 6-DIP (0.400", 10.16mm) Identical; direct PCB replacement
RoHS Status ROHS3 Compliant ROHS3 Compliant Identical
Approval Agency CSA, FIMKO, UL UR, VDE Different certifications; both meet regulatory standards

Engineering Selection Recommendations

MOC3052M (LITEON) — Primary selection for applications requiring maximum isolation voltage (5000Vrms) and extended operating temperature range to 100°C. Maintains active production status with established supply chain.

MOC3051TVM (onsemi) — Acceptable substitute where isolation voltage of 4170Vrms meets application requirements and operating temperature does not exceed 85°C. Verify that the driver circuit can supply the higher LED trigger current (15mA maximum). Both components carry equivalent regulatory compliance (ROHS3) with different certification bodies (onsemi: UR, VDE; LITEON: CSA, FIMKO, UL). Direct pin-compatible replacement in 6-DIP through-hole applications.

Frequently Asked Questions (FAQ)

Q: Can MOC3051TVM replace MOC3052M in all applications?

A: No. The MOC3051TVM has a lower isolation voltage rating (4170Vrms vs. 5000Vrms). Use MOC3051TVM only in applications where the lower isolation specification is acceptable. Additionally, verify that your driver circuit can supply 15mA LED trigger current (vs. 10mA for MOC3052M).

Q: Are the packages identical?

A: Yes. Both components use 6-DIP (0.400", 10.16mm) through-hole packaging and are direct pin-compatible for PCB replacement.

Q: What is the temperature difference impact?

A: MOC3052M operates to 100°C; MOC3051TVM to 85°C. For applications operating above 85°C, MOC3052M is required. For standard industrial applications (≤85°C), both are equivalent.

Q: Do the certifications differ?

A: Yes. MOC3052M carries CSA, FIMKO, and UL approvals; MOC3051TVM carries UR and VDE approvals. Both meet ROHS3 compliance. Select based on your regional certification requirements.

Q: What is the LED trigger current difference?

A: MOC3052M requires maximum 10mA; MOC3051TVM requires maximum 15mA. Ensure your driver circuit can supply the higher current for MOC3051TVM operation.

Q: Are both components actively manufactured?

A: Yes. Both MOC3052M and MOC3051TVM maintain active production status.

Request Quote (Ships tomorrow)