MOC216R2VM Equivalent & Substitute Parts

Part Overview

The MOC216R2VM is an optoisolator transistor with base output manufactured by onsemi, designed for high-voltage isolation applications requiring 2500Vrms isolation rating. This component features a single-channel configuration in an 8-SOIC surface mount package and is currently in active production status. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across isolation voltage, current transfer ratio, output specifications, and package form factor.

Substiute Parts

MOC216R2VM

onsemiIn Stock: 935MOC216R2VM Datasheet

Current PartRFQ

MOC216R2M

onsemiIn Stock: 13492MOC216R2M Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MOC216R2VM is determined by strict equivalence across the following parameters:

• Isolation voltage rating of 2500Vrms
• Single-channel configuration
• Minimum current transfer ratio of 50% @ 1mA
• Transistor with base output topology
• Maximum output voltage of 30V
• Maximum output current of 150mA per channel
• 8-SOIC surface mount package with 3.90mm width
• Operating temperature range of -40°C to 100°C
• DC input type

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both MOC216R2VM and MOC216R2M are active production components from onsemi with identical electrical and mechanical specifications. Selection between these parts may be based on inventory availability and packaging format. Both parts maintain ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for electronic component manufacturing and use. The MOC216R2M variant currently has higher inventory availability at 13,400 pieces compared to 887 pieces for the MOC216R2VM.

Frequently Asked Questions (FAQ)

Q: Can MOC216R2M be used as a direct replacement for MOC216R2VM?

A: Yes. Both parts are manufactured by onsemi and share identical electrical parameters including 2500Vrms isolation voltage, 50% minimum current transfer ratio, 150mA maximum output current, and 30V maximum output voltage. Both use the 8-SOIC surface mount package and operate across the same temperature range of -40°C to 100°C.

Q: What is the difference between MOC216R2VM and MOC216R2M?

A: The primary difference is packaging format. MOC216R2VM is supplied in Tape & Reel format, while MOC216R2M is also supplied in Tape & Reel format. Both parts are electrically and mechanically equivalent with no functional differences in circuit operation.

Q: Are there any compliance or certification differences between these parts?

A: No. Both MOC216R2VM and MOC216R2M maintain identical RoHS3 compliance status, REACH unaffected status, and Moisture Sensitivity Level 1 (Unlimited) rating.

Q: What parameters must remain constant when substituting these optoisolators?

A: The following parameters must be maintained: 2500Vrms isolation voltage, single-channel configuration, 50% minimum current transfer ratio at 1mA, transistor with base output topology, 30V maximum output voltage, 150mA maximum output current per channel, 8-SOIC package form factor, and -40°C to 100°C operating temperature range.

Q: Can these parts be used in applications requiring different isolation voltages?

A: No. These parts are specifically rated for 2500Vrms isolation. Applications requiring different isolation voltage ratings require alternative part numbers from the MOC216 series or other optoisolator families with appropriate voltage specifications.