MN10CEC/STX Equivalent & Substitute Parts

Part Overview

The MN10CEC/STX is a terminal butt splice connector manufactured by 3M, designed for crimp termination of 10-18 AWG wire gauges. This component is classified as obsolete, necessitating identification of active equivalent parts to maintain supply chain continuity and support ongoing applications requiring butt splice terminal functionality.

Substiute Parts

MN10CEC/STX

3MIn Stock: 1209MN10CEC/STX Datasheet

Current PartRFQ

0191600002

MolexIn Stock: 291750191600002 Datasheet

MFR RecommendedRFQ

JN418-212-C

Panduit CorpIn Stock: 1717JN418-212-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MN10CEC/STX is determined by the following critical parameters:

Terminal Type: All substitutes must be butt splice connectors with closed end, single opening configuration to maintain functional equivalence in wire splicing applications.

Termination Method: Crimp termination is required for all substitutes to ensure compatibility with existing assembly processes and tooling.

Insulation: Fully insulated construction is mandatory for all substitutes to provide equivalent electrical safety and environmental protection.

Wire Gauge Compatibility: Substitutes must support wire gauges within or overlapping the 10-18 AWG range of the original part.

Color and Material: Natural color and copper wire compatibility are maintained across all substitutes.

Regulatory Compliance: All substitutes maintain REACH Unaffected status and EAR99 ECCN classification consistent with the original part.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain active product status and full regulatory compliance with REACH Unaffected classification and EAR99 ECCN designation.

The Molex 0191600002 supports wire gauges 10-16 AWG, providing coverage for the lower to mid-range of the original MN10CEC/STX specification. This part is ROHS3 compliant and maintains MSL 1 rating.

The Panduit JN418-212-C supports wire gauges 12-18 AWG, providing coverage for the mid to upper range of the original specification. This part is ROHS3 compliant and carries Pan-Term® series designation.

Selection between substitutes depends on the specific wire gauge requirements of the application. Applications requiring 10-11 AWG termination must use the Molex 0191600002. Applications requiring 12-18 AWG termination may use either substitute. Applications requiring 10-18 AWG coverage across the full range require evaluation of whether the application can be segmented by wire gauge or if a different terminal family must be considered.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0191600002 replace the MN10CEC/STX in all applications?

A: The Molex 0191600002 supports 10-16 AWG wire gauges. It is suitable for applications using wire gauges within this range. Applications requiring 17-18 AWG termination cannot use this substitute.

Q: Can the Panduit JN418-212-C replace the MN10CEC/STX in all applications?

A: The Panduit JN418-212-C supports 12-18 AWG wire gauges. It is suitable for applications using wire gauges within this range. Applications requiring 10-11 AWG termination cannot use this substitute.

Q: What is the difference in wire gauge coverage between the substitutes?

A: The Molex 0191600002 covers 10-16 AWG, while the Panduit JN418-212-C covers 12-18 AWG. The overlap range is 12-16 AWG. The Molex part extends coverage to 10-11 AWG; the Panduit part extends coverage to 17-18 AWG.

Q: Are both substitutes RoHS compliant?

A: Yes, both the Molex 0191600002 and Panduit JN418-212-C are ROHS3 compliant.

Q: Do the substitutes maintain the same packaging format?

A: Both substitutes are supplied in bulk packaging. The original MN10CEC/STX packaging specification was not provided in the source data.

Q: Are all three parts REACH compliant?

A: All three parts maintain REACH Unaffected status, indicating no restriction under REACH regulations.