MMZ2012Y152BT000 Equivalent & Substitute Parts

Part Overview

The MMZ2012Y152BT000 is a 1.5 kOhms @ 100 MHz signal line ferrite bead in 0805 (2012 Metric) surface mount package manufactured by TDK Corporation. This component is classified as Last Time Buy, indicating discontinued production. Substitute parts are necessary to maintain design continuity and ensure long-term component availability for new production runs and field replacements.

Key Parameters

Parameter	Value
Impedance @ Frequency	1.5 kOhms @ 100 MHz
Filter Type	Signal Line
Number of Lines	1
Current Rating (Max)	500mA
DC Resistance (DCR) (Max)	400mOhm
Operating Temperature	-55°C ~ 125°C
Package / Case	0805 (2012 Metric)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MMZ2012Y152BT000 is determined by the following critical parameters:

Primary Matching Criteria:

Impedance @ Frequency: 1.5 kOhms @ 100 MHz (exact match required)
Filter Type: Signal Line (functional classification)
Number of Lines: 1 (single line configuration)
Operating Temperature Range: -55°C ~ 125°C (minimum requirement)
RoHS Status: ROHS3 Compliant (regulatory requirement)

Secondary Compatibility Factors:

Package / Case: 0805 (2012 Metric) preferred for direct PCB layout compatibility
Mounting Type: Surface Mount (process compatibility)
Current Rating (Max): Must meet or exceed application requirements
DC Resistance (DCR) (Max): Lower values preferred for reduced signal attenuation

The substitute parts listed below meet the primary matching criteria. Variations in package size, current rating, and DCR are noted for engineering evaluation based on specific application constraints.

Parameter Comparison

Parameter	MMZ2012Y152BT000 (Main)	MMZ1608Y152BTA00	BLM21BD152SN1D	MG2029-152Y
Manufacturer	TDK Corporation	TDK Corporation	Murata Electronics	Bourns Inc.
Impedance @ Frequency	1.5 kOhms @ 100 MHz	1.5 kOhms @ 100 MHz	1.5 kOhms @ 100 MHz	1.5 kOhms @ 100 MHz
Filter Type	Signal Line	Signal Line	Signal Line	Power, Signal Line
Number of Lines	1	1	1	1
Current Rating (Max)	500mA	300mA	250mA	100mA
DC Resistance (DCR) (Max)	400mOhm	600mOhm	450mOhm	550mOhm
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Package / Case	0805 (2012 Metric)	0603 (1608 Metric)	0805 (2012 Metric)	0805 (2012 Metric)
Size / Dimension	0.079" L x 0.049" W (2.00mm x 1.25mm)	0.063" L x 0.032" W (1.60mm x 0.80mm)	0.079" L x 0.049" W (2.00mm x 1.25mm)	0.079" L x 0.047" W (2.00mm x 1.20mm)
Height (Max)	0.041" (1.05mm)	0.037" (0.95mm)	0.041" (1.05mm)	0.043" (1.10mm)
Product Status	Last Time Buy	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

MMZ1608Y152BTA00 (TDK Corporation) This substitute maintains identical impedance and temperature specifications with Active product status. The 0603 (1608 Metric) package is smaller than the original 0805, requiring PCB layout modification. Current rating is reduced to 300mA and DCR increases to 600mOhm. Selection is appropriate for applications with lower current requirements and space-constrained designs.

BLM21BD152SN1D (Murata Electronics) This substitute provides the same 0805 package footprint as the main part, eliminating PCB layout changes. Impedance and temperature specifications match exactly. Current rating is reduced to 250mA and DCR increases to 450mOhm. EMIFIL® series designation indicates active product support. Selection is appropriate for direct PCB replacement with current requirements below 250mA.

MG2029-152Y (Bourns Inc.) This substitute matches impedance and temperature specifications with Active product status. The 0805 package footprint is compatible with the original design. Current rating is significantly reduced to 100mA and DCR increases to 550mOhm. Filter type includes Power and Signal Line capability. Selection is appropriate only for applications with maximum current below 100mA.

All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) ratings, ensuring regulatory and handling compatibility with the original specification.

Frequently Asked Questions (FAQ)

Q: Can MMZ1608Y152BTA00 be used as a direct replacement without PCB modification? A: No. The MMZ1608Y152BTA00 uses 0603 (1608 Metric) package versus the original 0805 (2012 Metric) package. PCB footprint modification is required. For direct footprint compatibility, use BLM21BD152SN1D or MG2029-152Y.

Q: What is the impact of increased DC Resistance (DCR) in substitute parts? A: All substitute parts show increased DCR compared to the original 400mOhm specification. Higher DCR increases signal attenuation and power dissipation. Verify that application signal integrity and thermal requirements remain within acceptable limits for the selected substitute.

Q: Are all substitute parts suitable for high-current applications? A: No. The original MMZ2012Y152BT000 supports 500mA. Substitute parts have reduced current ratings: MMZ1608Y152BTA00 (300mA), BLM21BD152SN1D (250mA), and MG2029-152Y (100mA). Select based on actual circuit current requirements.

Q: Do substitute parts maintain the same operating temperature range? A: Yes. All substitute parts operate across -55°C ~ 125°C, matching the original specification.

Q: What is the difference between Signal Line and Power, Signal Line filter types? A: Signal Line ferrite beads are optimized for signal integrity. Power, Signal Line beads (MG2029-152Y) are designed for dual-purpose filtering in both power and signal applications. Both are functionally compatible for signal line applications.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All substitute parts listed are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's regulatory status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message